Dragonhawk Wireless Tattoo Gun Machine YZBTD Instruction Manual

1. Introduzzjoni

This manual provides detailed instructions for the safe and effective operation of your Dragonhawk Wireless Tattoo Gun Machine, Model YZBTD. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. This machine is designed for professional tattoo artists and beginners, offering versatility and reliable performance.

2. Informazzjoni dwar is-Sigurtà

Always prioritize safety when operating tattoo equipment. Failure to follow these guidelines may result in injury or damage to the device.

• Għal Użu Estern Biss: This device is intended for tattooing on skin.
• Sterilizzazzjoni: Ensure all needles, cartridges, and contact surfaces are properly sterilized before each use.
• Sors tal-Enerġija: Uża biss il-kejbil tal-iċċarġjar ipprovdut u l-adapters tal-enerġija kompatibbli.
• Sigurtà tal-batterija: Do not expose batteries to extreme temperatures or puncture them. Dispose of used batteries responsibly.
• Immaniġġjar: Handle the machine with care. Avoid dropping or subjecting it to strong impacts.
• Umdità: Keep the device dry. It is water-resistant, but not waterproof. Avoid submerging it in liquids.
• Tfal: Żomm fejn ma jintlaħaqx mit-tfal.

3. Prodott Aktarview & Komponenti

The Dragonhawk Wireless Tattoo Gun Machine YZBTD is a cordless pen-style rotary tattoo machine featuring an adjustable stroke length and a powerful coreless motor.

Figura 3.1: Aktarview of the tattoo machine's control panel and battery.

Komponenti Ewlenin:

• Korp tal-Magni: Main housing containing the motor and drive system.
• Pakkett tal-batterija: Detachable power source with OLED display and control buttons.
• Adjustable Grip: Rotates to adjust needle depth.
• Stroke Adjustment Knob: Allows selection of 7 stroke lengths (2.4mm - 4.2mm).
• Needle Cartridge Slot: Where tattoo needle cartridges are inserted.
• Port tal-Iċċarġjar tat-Tip C: Għall-iċċarġjar mill-ġdid tal-batterija.

4. Setup

4.1 Installazzjoni tal-batterija

The machine comes with two replaceable batteries to ensure continuous operation.

1. Kun żgur li l-magna tkun mitfija.
2. Gently twist the battery pack counter-clockwise to detach it from the machine body.
3. Align a charged battery pack with the machine body and twist clockwise until securely fastened.

Figure 4.1: The machine is equipped with two replaceable batteries for extended use.

4.2 Installazzjoni tal-Kartriġ tal-Labra

Use only compatible Dragonhawk cartridge needles for optimal performance.

1. Agħżel il-kartriġ tal-labra mixtieq.
2. Insert the needle cartridge into the machine's slot, pushing firmly until it clicks into place.
3. To remove, twist the cartridge slightly and pull it out.

Figure 4.2: Proper insertion of a needle cartridge into the machine.

5. Istruzzjonijiet Operattivi

Familiarize yourself with the control panel for efficient operation.

Figure 5.1: Control panel and stroke adjustment.

5.1 Power On/Off

• Agħfas u żomm il- 'O' (Switch Button) for a few seconds to power the machine on or off.
• The OLED display will show the current voltage u livell tal-batterija.

5.2 Aġġustament tal-Volumtage

• Uża l- '+' (Voltage Increase Key) u '-' (Voltage Reduction Key) buttons to adjust the voltage f'inkrementi ta '0.1V.
• Il-vol rakkomandattage firxa hija 4V-12V.

5.3 Changing Mode (Liner/Shader)

• Agħfas il- 'M' (Switch Mode) button to switch between Liner (L) and Shader (S) gears.
• The machine automatically memorizes the voltage settings for each mode.

5.4 Aġġustament tat-Tul tal-Puplesija

The machine offers 7 adjustable stroke lengths from 2.4mm to 4.2mm.

• Rotate the adjustment knob located on the machine body to select the desired stroke length.
• Available lengths: 2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, 4.2mm.

Figure 5.2: Adjusting the stroke length by rotating the knob.

5.5 Vidjo Uffiċjali tal-Prodott

6. Manutenzjoni

6.1 Tindif

• Dejjem skonnettja l-enerġija qabel it-tindif.
• Wipe the machine body with a soft, damp cloth and a mild disinfectant.
• Do not use abrasive cleaners or submerge the machine in liquid.
• Ensure no liquid enters the motor or charging port.

6.2 Iċċarġjar

The machine is equipped with a Type-C charging port.

• Connect the provided Type-C cable to the charging port on the battery pack.
• Connect the other end to a compatible USB power adapter.
• Ċarġ sħiħ jieħu madwar 1.5 sigħat.
• The battery indicator on the OLED display will show charging status.

Figure 6.1: Type-C charging port on the battery pack.

6.3 Kura tal-Batterija

• Biex ittawwal il-ħajja tal-batterija, evita li tiċċarġja kompletament il-batterija ta' spiss.
• Store the machine and spare batteries in a cool, dry place when not in use.
• If storing for an extended period, charge the batteries to about 50-60% capacity.

7 Issolvi l-problemi

Irreferi għat-tabella t'hawn taħt għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom.

8. Speċifikazzjonijiet

Technical details of the Dragonhawk Wireless Tattoo Gun Machine YZBTD.

9. Garanzija u Appoġġ

Dragonhawk is committed to providing high-quality products and excellent customer service.

• Kopertura tal-Prodott: Dragonhawk products typically include coverage for manufacturing defects. Please refer to your purchase documentation for specific warranty terms.
• Appoġġ Tekniku: For video tutorials, setup guides, and professional tips, visit Youtube.com/@Dragonhawkofficial.
• Servizz tal-Klijent: For any inquiries or issues with your order, please reach out through Amazon's messaging system.
• Ritorni: Dan il-prodott għandu politika ta' ritorn ta' 30 jum għal rifużjoni/sostituzzjoni.