Nulaxy A4 EX
Nulaxy A4 EX 360 Rotating Foldable Cell Phone Stand User Manual
Model: A4 EX | Brand: Nulaxy
1. Introduzzjoni
Thank you for choosing the Nulaxy A4 EX 360 Rotating Foldable Cell Phone Stand. This versatile and portable stand is designed to enhance your viewing experience by providing adjustable angles and a stable platform for your devices. It is compatible with a wide range of smartphones, tablets, and other portable devices.
Karatteristiċi ewlenin:
- Bażi li Ddur 360°: Effortlessly adjust your viewing angolu għall-kumdità ottimali.
- Disinn kompletament aġġustabbli: Customize height and tilt for various uses.
- Li jintwew u li jinġarru: Disinn kompatt għal ħażna u trasport faċli.
- Thick Case Friendly: Accommodates devices with protective cases.
- Charge While You Watch: Designed to allow charging cable access while your device is mounted.
2. Setup
The Nulaxy A4 EX stand comes pre-assembled and is ready for immediate use. Follow these steps to set up your stand:
- Iftaħ l-Istand: Gently unfold the stand from its compact, folded position. The hinges are designed to provide firm resistance to maintain your chosen angle.
- Aġġusta l-Bażi: Place the stand on a flat, stable surface. The base features a 360° rotating mechanism. You can rotate the base to your desired orientation.
- Aġġusta d-Detentur tal-Apparat: Adjust the upper arm and the device cradle to achieve your preferred viewing height and angle. The stand features dual-core shaft technology for stable adjustments.

Figure 2.1: Nulaxy A4 EX stand unfolded, highlighting its 360-degree rotating base.

Figure 2.2: The Nulaxy A4 EX stand in its compact, folded state, demonstrating portability.
3. Istruzzjonijiet Operattivi
Tqegħid tat-Tagħmir Tiegħek:
- Gently place your smartphone or tablet onto the cradle. The silicone pads on the cradle and base protect your device from scratches and prevent slipping.
- The stand is designed to accommodate devices with thick cases.
L-aġġustament Viewing Angle and Orientation:
- Rotazzjoni 360°: Use the rotating base to swivel your device to any desired angle without lifting the stand.
- Aġġustament tal-inklinazzjoni: The upper hinge allows you to tilt your device forward or backward to find the optimal viewangolu tal-ing.
- Vertikali jew Orizzontali: The stand supports both vertical (portrait) and horizontal (landscape) orientations for your device.

Figure 3.1: Demonstrating the 360-degree rotation of the Nulaxy A4 EX stand for shared viewing.
Iċċarġjar tat-Tagħmir Tiegħek:
- The design of the stand includes a cutout at the bottom of the device cradle, allowing you to connect a charging cable to your device while it is mounted.
- Ensure the cable is properly aligned and connected to avoid strain on the port.
Video 3.1: Official Nulaxy video demonstrating the rotatable feature, device placement, and charging compatibility of the A4 EX phone stand.
4. Manutenzjoni
- Tindif: Imsaħ l-istand b'ċarruta ratba, damp drapp. Evita li tuża cleaners li joborxu jew solventi li jistgħu jagħmlu ħsara lill-finitura.
- Ħażna: When not in use, fold the stand to its compact form and store it in a dry place away from direct sunlight or extreme temperatures.
- Kura taċ-Ċappetta: The hinges are designed for durability. Avoid forcing them beyond their natural range of motion.
5 Issolvi l-problemi
| Ħruġ | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Stand feels unstable or tips over | Device is too heavy or improperly placed; stand not fully unfolded. | Ensure the stand is fully unfolded and placed on a flat surface. Center your device on the cradle. For heavier devices, ensure the angle is not too steep. |
| Device slips from cradle | Cradle pads are dirty or worn; device not properly seated. | Clean the silicone pads on the cradle. Ensure your device is securely seated within the cradle. |
| Difficulty adjusting hinges | Dust or debris in hinges; hinges are stiff from newness. | Gently work the hinges back and forth. If new, stiffness is normal and will ease with use. Do not apply excessive force. |
6. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | A4 EX |
| Materjal | Aluminju, silikonju |
| Piż tal-oġġett | 5.3 uqija |
| Dimensjonijiet tal-Pakkett | 4.45 x 3.5 x 1.73 pulzieri |
| Fattur tal-Formola | Bażi li jdur |
| Apparati Kompatibbli | Cell Phones (4-8"), Smartphones, Kindle, Mobile Phones, Small Palmtops, Nintendo Switch. Compatible with various brands including Apple iPhone, Samsung Galaxy, Sony, Google Pixel, Huawei, Honor, HTC, Nokia, Xiaomi, Microsoft, Lumia, BlackBerry. |

Figure 6.1: Nulaxy A4 EX stand with a phone, illustrating recommended bending angles for stability (upper: 30-60°, bottom: 45-80°).
7. Informazzjoni dwar Garanzija
Please refer to the product packaging or the official Nulaxy website for specific warranty details and terms of service. Keep your purchase receipt as proof of purchase for any warranty claims.
8. Appoġġ għall-Klijent
For any questions, technical assistance, or support regarding your Nulaxy A4 EX phone stand, please contact Nulaxy customer service through their official webis-sit jew l-informazzjoni ta’ kuntatt ipprovduta fuq l-imballaġġ tal-prodott.
Visit the Nulaxy Store: Nulaxy Official Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.