Manwal tal-Utent tal-Magna tal-Ġbid AURA Livac 114R

1. Introduzzjoni

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your AURA Livac 114R Suction Machine. Please read this manual thoroughly before using the appliance and retain it for future reference.

The AURA Livac 114R is a versatile cleaning appliance designed for dust and water suction, carpet washing, and blower functions, offering powerful cleaning capabilities for various household and commercial needs.

2. Istruzzjonijiet tas-Sigurtà

WARNING: To reduce the risk of fire, electric shock, or injury, read and follow all instructions carefully.

• Always disconnect the power cord from the electrical outlet before servicing.
• Do not use the appliance on wet surfaces when operating in dry mode.
• Taqbadx likwidi li jaqbdu jew kombustibbli, bħall-gażolina, jew tużax f'żoni fejn jistgħu jkunu preżenti.
• Tiġborx xi ħaġa li tkun qed taħraq jew tpejjep, bħal sigaretti, lofarini, jew irmied jaħraq.
• Żomm ix-xagħar, il-ħwejjeġ laxki, is-swaba’, u l-partijiet kollha tal-ġisem 'il bogħod minn fetħiet u partijiet li jiċċaqilqu.
• Uża biss kif deskritt f'dan il-manwal. Uża biss l-aċċessorji rakkomandati mill-manifattur.
• Tużax b'korda jew plagg bil-ħsara. Jekk l-apparat mhux qed jaħdem kif suppost, jekk waqa', ġarrab ħsara, tħalla barra, jew waqa' fl-ilma, irritornah f'ċentru tas-servizz.
• Tiġbedx jew iġorrux bil-korda, uża korda bħala manku, agħlaq bieb fuq korda, jew iġbed korda madwar truf jew kantunieri li jaqtgħu. Tmexxix l-apparat fuq il-korda. Żomm il-korda 'l bogħod minn uċuħ imsaħħna.
• Tneħħix il-plagg billi tiġbed il-korda. Biex tneħħi l-plagg, aqbad il-plagg, mhux il-korda.
• M'għandekx timmaniġġja l-plagg jew l-apparat b'idejhom imxarrbin.
• Itfi l-kontrolli kollha qabel ma splaggja.

3. Komponenti tal-Prodott

The AURA Livac 114R Suction Machine includes the following main components:

• Main Unit (Motor housing, dust/water container)
• Manka Flessibbli
• Wands ta 'Estensjoni
• Carpet Washing Nozzle
• Filtru tat-Trab
• Water Tank (for carpet washing solution)
• Korda tal-Enerġija

Figura 1: Aktarview of the AURA Livac 114R Suction Machine, showing the main unit, flexible hose, and carpet washing nozzle attachment.

4. Setup u Assemblea

4.1 Disimballaġġ

Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in Section 3 are present.

4.2 Attaching the Flexible Hose

1. Locate the suction inlet on the main unit.
2. Insert the flexible hose connector firmly into the inlet until it clicks into place.

4.3 Attaching Extension Wands and Nozzles

1. Connect the desired number of extension wands to the end of the flexible hose.
2. Attach the appropriate nozzle (e.g., carpet washing nozzle, crevice tool, brush) to the end of the extension wand.

4.4 Preparing for Carpet Washing

1. Open the extra basin (3.5 L capacity) for the cleaning solution.
2. Imla l-basin with water and a suitable carpet cleaning solution according to the solution manufacturer's instructions. Do not overfill.
3. Ensure the pump connection is secure.

5. Istruzzjonijiet Operattivi

5.1 Dry Vacuuming (Dust Suction)

1. Ensure the dust filter is correctly installed in the 5 L dust container.
2. Connect the flexible hose and appropriate dry vacuuming nozzle.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the power button (usually green or marked with 'I') to start the motor.
5. Mexxi ż-żennuna fuq il-wiċċ li jrid jitnaddaf.
6. After use, press the power button to turn off the machine and unplug it.

5.2 Wet Vacuuming (Water Suction)

CAUTION: Remove the dust filter before wet vacuuming to prevent damage.

1. Neħħi l-filtru tat-trab.
2. Ensure the 6 L waste basin is empty and properly secured.
3. Connect the flexible hose and a suitable wet vacuuming nozzle.
4. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
5. Agħfas il-buttuna tal-qawwa biex tibda l-mutur.
6. Vacuum up spilled liquids. Do not exceed the maximum fill line of the waste basin.
7. After use, press the power button to turn off the machine and unplug it. Empty and clean the waste basin immedjatament.

5.3 Carpet Washing Function

1. Prepare the cleaning solution in the 3.5 L extra basin kif deskritt fit-Taqsima 4.4.
2. Attach the carpet washing nozzle and ensure the spray hose is connected.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the main power button (for suction) and the pump power button (for spraying solution).
5. Spray the cleaning solution onto the carpet by pressing the trigger on the nozzle.
6. Immediately move the nozzle over the wet area to suction up the dirty solution.
7. Work in small sections, overlapping slightly.
8. After cleaning, run the machine with clean water to rinse the internal hoses and nozzle.
9. Turn off both power buttons and unplug the machine. Empty and clean all basins.

5.4 Funzjoni tal-blower

1. Locate the blower outlet on the main unit (usually opposite the suction inlet).
2. Attach the flexible hose to the blower outlet.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Agħfas il-buttuna tal-qawwa biex tattiva l-blower.
5. Direct the airflow as needed for blowing dust or drying surfaces.
6. After use, press the power button to turn off the machine and unplug it.

6. Manutenzjoni

Regular maintenance ensures optimal performance and extends the lifespan of your AURA Livac 114R.

6.1 Emptying and Cleaning the Dust/Waste Basin

• After each use, especially wet vacuuming or carpet washing, empty the 6 L waste basin.
• Laħlaħ il-basin thoroughly with clean water and allow it to air dry completely before reassembling.

6.2 Tindif tal-Filtru tat-Trab

• For dry vacuuming, regularly check and clean the dust filter.
• Tap the filter gently to dislodge dust, or rinse with water if heavily soiled. Ensure it is completely dry before reinstallation.
• Replace the filter if it is damaged or excessively worn.

6.3 Cleaning the Extra Basin (Solution Tank)

• After carpet washing, empty any remaining cleaning solution.
• Rinse the 3.5 L extra basin with clean water to prevent residue buildup.

6.4 Cleaning Hoses and Nozzles

• Rinse all hoses and nozzles with clean water after wet use to prevent blockages and odors.
• Ensure they are dry before storage.

6.5 Ħażna

Aħżen l-apparat u l-aċċessorji tiegħu f'post nadif u niexef, 'il bogħod mix-xemx diretta u minn temperaturi estremi.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

• Mudell: Livac 114R
• Ditta: AURA
• Max. Qawwa tal-Mutur: 2000 W
• Qawwa tal-ġbid: 1950 mmH2O
• Voltage: 220 - 240 V AC
• Frekwenza: 50/60 Hz
• Fluss tal-Arja: 200 m³/h
• Kapaċità ta 'ġbid: 1.5 L/s
• Qawwa tal-Pompa: 26 W
• Pressjoni tal-Pompa: 2.5 bar
• Waste Basin Volum: 6 L
• Kapaċità tal-Kontenitur tat-Trab: 5 L
• Extra Basin Volume (Solution Tank): 3.5 L
• Piż tal-oġġett: 8 kg (Package Dimensions: 54 x 50.7 x 44.7 cm; 8 kg)
• Karatteristiċi Speċjali: Dry, Wet, Carpet Washing, Blower Function

9. Garanzija u Appoġġ

For warranty information and customer support, please refer to the warranty card included with your product or visit the official AURA websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

For technical assistance or spare parts, contact AURA customer service through the details provided in your product documentation.