JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

JEYI M.2 NVMe SSD Enclosure
Pads Termali
Tornavit
USB-A to USB-C Cable (10Gbps)
Kejbil USB-C għal USB-C (10Gbps)
Lanyard

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Setup Istruzzjonijiet

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Ipprepara l-Għeluq: Gently slide open the enclosure to reveal the internal PCB.
Applika Kuxxinett Termali: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Assigura l-SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Agħlaq l-Għeluq: Carefully slide the enclosure cover back into place until it clicks securely.

Sploda view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Istruzzjonijiet Operattivi

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Qabbad mal-Apparat: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Indikatur tal-Enerġija: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Trasferiment tad-Data: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Manutenzjoni

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Ġestjoni tas-Sħana: L-aluminju casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-kaxxa. Evita li tuża prodotti tat-tindif likwidi jew solventi.
Ħażna: Meta ma tkunx qed tużah, aħżen l-għeluq f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
Kura tal-Cable: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Issolvi l-problemi

Problema	Kawża Possibbli	Soluzzjoni
L-enclosure mhux skopert mill-kompjuter.	Konnessjoni tal-kejbil maħlula. L-SSD mhux installat sew. L-SSD mhux inizjalizzat/ifformattjat. Faulty USB port or cable.	Kun żgur li l-kejbils huma konnessi sew. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Ipprova port jew kejbil USB differenti.
Veloċitajiet baxxi tat-trasferiment tad-dejta.	Imqabbad ma' port USB aktar bil-mod (eż., USB 2.0). Thermal throttling due to high temperature. SSD performance limitations.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Speċifikazzjonijiet

Karatteristika	Dettall
Mudell	I9-Seal
Brand	JEYI
Interface tal-Ħardwer	USB 3.2 Ġen 2 (USB-C)
Rata ta' Trasferiment tad-Data	Sa 10 Gbps
Compatible SSD Type	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Kapaċità Massima tal-Ħażna	4 TB
Chipset	JMS583 A3
Karatteristiċi	UASP Support, TRIM Support, Win to Go (WTG) Support
Materjal	Liga tal-Aluminju
Kulur	Fidda
Dimensjonijiet tal-Prodott	4.06 x 1.02 x 0.39 pulzieri (103 x 26 x 10 mm)
Piż tal-oġġett	0.317 uqija (9 gramma)
Sistemi Operattivi Kompatibbli	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Garanzija u Appoġġ

For warranty information or technical support, please refer to the official JEYI webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Id-dettalji dwar perjodi ta' garanzija speċifiċi u l-kanali ta' appoġġ tipikament jiġu pprovduti mad-dokumentazzjoni tax-xiri tiegħek jew fuq il-paġna tal-manifattur. websit.

Manifattur: JEYI

Websit: Visit the JEYI Store on Amazon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.