Introduzzjoni
The JBL GO 3 is an ultra-portable and lightweight Bluetooth speaker designed for on-the-go use. It features JBL Pro Sound, a modern design, and is available in various colors. This speaker allows you to stream music wirelessly from your mobile phone or smartphone, offering up to 5 hours of playtime on a single charge. The GO 3 is built to withstand outdoor adventures, being IP67 rated for water and dust resistance.
Image: The JBL GO 3 speaker, demonstrating its ultra-portable design, shown on a sandy beach next to individuals.
X'hemm fil-Kaxxa
Upon unboxing your JBL GO 3, you should find the following items:
- 1x JBL GO 3 Portable Bluetooth Speaker
- 1x USB Type-C Cable
- 1x Gwida tal-Bidu Mgħaġġel
- 1x Skeda tas-Sigurtà
Prodott Overview
Komponenti tal-Ispeaker
Immaġni: Quddiem view of the JBL GO 3 speaker, showcasing id-disinn kompatt tiegħu u l-logo JBL.
Image: Top panel of the JBL GO 3, displaying the volume up (+), play/pause (triangle), and volume down (-) buttons.
Immaġni: Ġenb view of the JBL GO 3, featuring the integrated fabric loop for portability.
Immaġni: Taħt view of the JBL GO 3, showing the anti-slip rubberized feet and regulatory markings.
Setup
1. Iċċarġjar tal-batterija
Before first use, fully charge the JBL GO 3. Connect the supplied USB Type-C cable to the charging port on the speaker and to a USB power adapter (not included). The charging indicator light will show the charging status.
- Ħin tal-Iċċarġjar: Approximately 2.5 hours (with 5V/1A adapter).
- Tip ta 'batterija: Lithium-ion polymer (22.2 Wh).
Image: The JBL GO 3 speaker shown during a picnic, illustrating its battery life of up to 5 hours.
2. Power On/Off
To power on the speaker, press the power button located on the side. Press and hold the power button again to turn it off.
3. Tqabbil tal-Bluetooth
- Turn on the JBL GO 3. The Bluetooth indicator light will flash, indicating it is in pairing mode.
- On your mobile device, go to Bluetooth settings and select "JBL GO 3" from the list of available devices.
- Ladarba tkun konness, id-dawl indikatur tal-Bluetooth jibqa' mixgħul solidu.
Image: Icon representing Bluetooth connectivity.
Istruzzjonijiet Operattivi
Daqq tal-Mużika
- Play/Pawsa: Press the play/pause button (triangle icon) once to play or pause music.
- Track li jmiss: Agħfas darbtejn il-buttuna tal-plej/pawża biex taqbeż għat-trakka li jmiss.
- Kontroll tal-Volum: Use the volume up (+) and volume down (-) buttons on the speaker to adjust the audio level.
Image: Icon representing JBL Pro Sound quality.
Manutenzjoni
Tindif
Imsaħ il-kelliem b 'soft, damp cloth. Do not use harsh chemicals or abrasive materials. Ensure the charging port cover is securely closed before cleaning with water.
Reżistenza għall-Ilma u t-Trab (IP67)
The JBL GO 3 is IP67 rated, meaning it is protected against dust ingress and can withstand immersion in water up to 1 meter for up to 30 minutes. For optimal performance and longevity, ensure the charging port cover is fully sealed before exposing the speaker to water or dust. After exposure to water, allow the speaker to dry completely before charging.
Image: The JBL GO 3 speaker shown partially submerged in shallow water on a sandy beach, illustrating its IP67 waterproof capability.
Image: Icon indicating IP67 water and dust resistance.
Ħażna
Aħżen l-ispiker f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi meta ma jkunx qed jintuża għal perjodi twal.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ispeaker ma jixgħelx. | Il-batterija hija eżawrita. | Charge the speaker using the supplied USB-C cable. |
| Ma tistax tqabbad permezz tal-Bluetooth. | L-ispiker mhux fil-modalità ta' tqabbil jew wisq 'il bogħod mill-apparat. | Ensure speaker is on and Bluetooth indicator is flashing. Move device closer. Try re-pairing. |
| L-ebda ħoss jew volum baxx. | Volum baxx wisq fuq l-ispiker jew l-apparat konness. | Żid il-volum kemm fuq l-ispiker kif ukoll fuq l-apparat konness tiegħek. |
| Kwalità tal-ħoss ħażina. | Interference or device too far. | Move speaker closer to the connected device. Avoid obstacles between devices. |
| Speaker unresponsive. | Problema temporanju tas-softwer. | To reset the product, turn on the speaker and simultaneously press the volume + button and the Bluetooth button for 3 to 5 seconds until the speaker turns off. |
Speċifikazzjonijiet
Image: Diagram showing the dimensions of the JBL GO 3 speaker.
- Isem tal-Mudell: JBLGO3BLU
- Ditta: JBL
- Qawwa tal-Ħruġ: 4.2 Watt RMS
- Rispons tal-Frekwenza: 110 Hz sa 20 kHz
- Proporzjon Sinjal-Ħsejjes: > 85 dB
- Teknoloġija tal-Konnettività: Bluetooth, USB
- Verżjoni Bluetooth: 5.1
- Bluetooth Profiles: A2DP 1.3, AVRCP 1.6
- Qawwa tat-Trasmettitur Bluetooth: ≤ 8 dBm (EIRP)
- Medda Bluetooth: 10 Meters
- Ħajja tal-batterija: Up to 5 hours (varies with volume level and audio content)
- Ħin tal-Ħarġ tal-Batterija: 2.5 sigħat (5V / 1A)
- Tip ta 'batterija: Lithium-ion polymer (22.2 Wh)
- Reżistenza għall-Ilma: IP67 (Li ma jgħaddix ilma minnu u li ma jgħaddix trab)
- Materjal: Plastik
- Dimensjonijiet (P x T x G): 7.5 x 8.7 x 4.1 ċm (Fond x Wisa' x Għoli)
- Piż tal-oġġett: 209 Gramm
- Apparati Kompatibbli: Laptop, Pillola, Smartphone
- Metodu ta' Kontroll: Buttuni
- UPC: 050036374378, 194644118723
Garanzija u Appoġġ
The JBL GO 3 comes with a limited warranty. Please refer to the safety sheet included in the box for detailed warranty information.
- Deskrizzjoni tal-garanzija: 12-il Xahar
- Disponibbiltà ta' Spare Parts: 2 Snin
For further assistance, please visit the official JBL support websit jew ikkuntattja lis-servizz tal-konsumatur tagħhom.
You can visit the JBL brand store for more products and information: Ħanut tal-Marka JBL