Introduzzjoni
This user manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your Magnusson 15m Self-Levelling Laser Level. Designed for precision, this tool offers 1mm accuracy over a 15-meter working range, making it ideal for various measuring and layout tasks in DIY and professional settings. Please read this manual thoroughly before first use to ensure optimal performance and safety.
Informazzjoni dwar is-Sigurtà
Dejjem segwi l-linji gwida tas-sigurtà li ġejjin biex tevita korrimenti u ħsara lill-apparat:
- Radjazzjoni tal-Lejżer: Do not stare directly into the laser beam. Class II laser product.
- Protezzjoni tal-għajnejn: Evita espożizzjoni diretta għall-għajnejn.
- Tfal: Żomm fejn ma jintlaħaqx mit-tfal.
- Ambjent Operattiv: Use in a well-lit area. Avoid dusty or wet conditions.
- Sigurtà tal-batterija: Use only recommended battery types. Do not mix old and new batteries. Dispose of batteries properly.
- Manutenzjoni: Tippruvax tiżżarma jew issewwi l-apparat int stess. Irreferi għal persunal tas-servizz kwalifikat.
Prodott Overview
Figura 1: Quddiem view of the Magnusson 15m Self-Levelling Laser Level. This image shows the compact black and orange casing of the device, highlighting its robust design.
Figure 2: The laser level in operation, projecting a horizontal red line on a wall. Two individuals are visible in the background, using the projected line for alignment. A hammer and nails are on the table in the foreground, indicating a construction or DIY setting.
Figure 3: The laser level projecting both horizontal and vertical red cross lines on a wall. The device is placed on a wooden surface with a hammer and nails nearby, demonstrating its application in precise layout tasks.
Setup
- Spakkjar: Carefully remove the laser level from its packaging. Inspect for any signs of damage.
- Installazzjoni tal-batterija: Locate the battery compartment, typically on the side or bottom of the device. Insert the required batteries (check specifications for type and quantity) ensuring correct polarity. Close the compartment securely.
- Immuntar (Mhux obbligatorju): For stable operation, place the laser level on a flat, stable surface or mount it onto a compatible tripod using the threaded insert (if available).
- Qawwa Mixgħul: Locate the power switch, usually a sliding or push button. Turn the device ON.
Istruzzjonijiet Operattivi
Self-Levelling Mode
The Magnusson laser level features an automatic self-levelling pendulum system. When the device is powered on and within its levelling range, it will automatically adjust to project a level line.
- Activate Self-Levelling: Slide the power switch to the "ON" position. The laser lines will activate and begin to self-level.
- Out-of-Level Indication: If the device is placed on a surface that is too inclined (beyond its self-levelling range), the laser lines may flash rapidly or an audible alarm may sound. Adjust the position of the device until the lines become stable.
- Line Projection: Depending on the model, you may have buttons to switch between horizontal line, vertical line, or cross-line projection. Press the appropriate button to select your desired projection mode.
Manual Mode (Locked Pendulum)
For projecting lines at an angle, the self-levelling function can be locked.
- Engage Manual Mode: Typically, this mode is activated by locking the pendulum before powering on, or by holding a specific button. Refer to the device's controls for exact activation.
- Project Angled Lines: Once in manual mode, you can tilt the device to project lines at any desired angle. The lines will not self-level in this mode.
Manutenzjoni
- Tindif: Uża artab, damp cloth to clean the exterior of the device. Do not use abrasive cleaners or solvents. Keep the laser output window clean.
- Ħażna: Store the laser level in its original case or a protective pouch when not in use. Store in a dry, cool place, away from direct sunlight and extreme temperatures.
- Tneħħija tal-batterija: Jekk l-apparat ma jkunx se jintuża għal perjodu twil ta' żmien, neħħi l-batteriji biex tevita t-tnixxija u l-korrużjoni.
- Kontroll tal-Kalibrazzjoni: Periodically check the calibration of your laser level. Refer to a qualified service center if recalibration is needed.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-linji tal-lejżer huma mċajpra jew mhux viżibbli. | Low batteries; Bright ambient light; Dirty laser output window. | Replace batteries; Use in lower light conditions or with a laser receiver; Clean the laser output window. |
| Laser lines are flashing or beeping. | Device is out of self-levelling range. | Poġġi l-apparat fuq wiċċ aktar livellat. |
| Laser lines are not straight. | Device is in manual mode; Device is damaged or out of calibration. | Ensure self-levelling mode is active; Contact service for calibration or repair. |
Speċifikazzjonijiet
- Ditta: QB
- Mudell: 15m Self-Levelling Laser Level (ASIN: B07YSN2MBS)
- Preċiżjoni tal-Kejl: 1mm
- Medda ta' Ħidma: 15m
- Għoli tal-Prodott: 83.5mm
- Wisa' tal-Prodott: 56mm
- Piż tal-Prodott: 275g
- Kulur: Iswed, Oranġjo
- Materjal: Plastik, Aluminju
- Manifattur: MADE by B&Q
- L-Ewwel Disponibbli: 6 ta' Ottubru 2019
Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għad-dokumentazzjoni pprovduta max-xiri tiegħek jew ikkuntattja lill-manifattur direttament. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Manifattur: MADE by B&Q
For further assistance, please visit the official QB or Magnusson websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.