Axis M7104 Video Encoder User Manual

1. Introduzzjoni

The Axis M7104 Video Encoder is designed to integrate analog CCTV cameras into an IP-based video surveillance system. This device digitizes analog video signals, allowing them to be viewed, recorded, and managed over a network. It supports various video surveillance and security system applications, providing a bridge between traditional analog infrastructure and modern IP network capabilities.

Figura 1: Axis M7104 Video Encoder. This image shows the front of the video encoder, highlighting its compact design and various input/output ports for connecting analog cameras and network cables.

2. Informazzjoni dwar is-Sigurtà

• Użu fuq ġewwa biss: This device is designed for indoor use. Do not expose it to outdoor elements, moisture, or extreme temperatures.
• Provvista tal-Enerġija: Use only the power adapter supplied with the device or a compatible power supply specified by Axis Communications.
• Ventilazzjoni: Kun żgur li jkun hemm ventilazzjoni xierqa madwar l-apparat biex tevita li jisħon iżżejjed. Timblokkax il-fetħiet tal-ventilazzjoni.
• Immuntar: Mount the device securely on a stable surface or rack.
• Tindif: Disconnect power before cleaning. Use a dry, soft cloth. Do not use liquid or aerosol cleaners.
• Servizzi: Tippruvax isservi dan il-prodott int stess. Irreferi l-manutenzjoni kollha lil persunal tas-servizz kwalifikat.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Axis M7104 Video Encoder Unit
• Adapter tal-Enerġija
• Gwida għall-Installazzjoni / Dokumentazzjoni
• Bracket tal-Immuntar (jekk applikabbli)

4. Setup

4.1 Konnessjonijiet Fiżiċi

1. Connect Analog Cameras: Connect your analog CCTV cameras to the video input ports on the Axis M7104 using coaxial cables. The encoder typically features multiple BNC connectors for this purpose.
2. Qabbad man-Netwerk: Connect an Ethernet cable (Cat 6 recommended) from the RJ45 network port on the encoder to your network switch or router. Ensure the network connection is active.
3. Qabbad l-Enerġija: Plug the power adapter into the encoder's power input and then into a suitable power outlet. The device will power on automatically.

4.2 Konfigurazzjoni Inizjali

After connecting the hardware, you will need to configure the encoder via its web interface:

• Skopri l-Apparat: Use the Axis IP Utility or Axis Device Manager software to discover the encoder on your network and obtain its IP address.
• Aċċess Web Interface: Iftaħ a web browser and enter the encoder's IP address. You will be prompted to set a root password for the device.
• Configure Video Streams: Fi ħdan il- web interface, configure video settings for each connected camera, including resolution, frame rate (e.g., 30 Hz), compression, and streaming profiles.
• Issettjar tan-Netwerk: Adjust network settings such as static IP address, DNS, and gateway if required by your network infrastructure.

5. Operating the Video Encoder

Once configured, the Axis M7104 Video Encoder operates by continuously digitizing and streaming video from connected analog cameras over the network. It is primarily used for video surveillance and security systems.

• Live View: Access live video streams from connected cameras through a compatible Video Management Software (VMS) or directly via the encoder's web interface.
• Reġistrazzjoni: Integrate the encoder with a Network Video Recorder (NVR) or VMS for continuous or event-triggered recording of video streams.
• Ġestjoni tal-Avvenimenti: Configure event triggers (e.g., motion detection, external input) and corresponding actions (e.g., send notifications, start recording) through the encoder's web interfaċċja jew VMS.
• Aċċess mill-bogħod: Access video streams and manage the encoder remotely via a secure network connection, often facilitated by your VMS or network configuration.

6. Manutenzjoni

• Tindif: Periodically clean the exterior of the encoder with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the device is powered off before cleaning.
• Aġġornamenti tal-Firmware: Iċċekkja regolarment l-Axis Communications website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow the instructions provided by Axis for firmware update procedures.
• Kundizzjonijiet Ambjentali: Ensure the operating environment remains within the specified temperature and humidity ranges for indoor use to prevent damage and ensure longevity.

7 Issolvi l-problemi

Kwistjonijiet Komuni u Soluzzjonijiet:

• Ebda Qawwa:
  • Verify the power adapter is securely connected to both the encoder and a working power outlet.
  • Iċċekkja jekk l-iżbokk tad-dawl huwiex funzjonali.
• L-ebda Konnessjoni man-Netwerk:
  • Ensure the Ethernet cable is properly connected to the RJ45 port on the encoder and the network switch/router.
  • Check the network status lights on the encoder and the switch.
  • Verify network settings (IP address, subnet mask, gateway) are correct.
  • Try restarting the encoder and the network switch.
• Ebda Sinjal tal-Vidjo:
  • Confirm that analog cameras are properly connected to the coaxial video input ports.
  • Ensure cameras are powered on and functioning correctly.
  • Check video settings in the encoder's web interface for the specific channel.
• Ma nistax naċċessa Web Interface:
  • Verify the encoder's IP address is correct and reachable from your computer.
  • Ensure your computer is on the same network segment as the encoder.
  • Iddiżattiva temporanjament kwalunkwe firewall jew softwer antivirus fuq il-kompjuter tiegħek li jista' jkun qed jimblokka l-aċċess.
  • Try using the Axis IP Utility to rediscover the device.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Għal informazzjoni dettaljata dwar il-garanzija, appoġġ tekniku, u riżorsi addizzjonali, jekk jogħġbok żur is-sit uffiċjali ta' Axis Communications. website. You can find product documentation, FAQs, and contact information for customer service.

Uffiċjali Websit: www.axis.com

Meta tikkuntattja l-appoġġ, jekk jogħġbok żomm in-numru tal-mudell tal-prodott tiegħek (01679-001) u n-numru tas-serje lesti.