1. Introduzzjoni
Thank you for choosing the PHILIPS Stellar Bright 16W LED Bulb. This manual provides essential information for the safe and efficient use of your new LED bulbs. These bulbs are designed for indoor use, offering cool daylight illumination with energy-efficient LED technology.
The image displays the PHILIPS Stellar Bright 16W LED Bulb alongside its retail packaging. The packaging highlights key features such as 82% energy saving and EyeComfort Technology. The bulb itself is a standard A-shape with a B22 base.
2. Informazzjoni dwar is-Sigurtà
- Always turn off the power supply before installing, removing, or cleaning the bulb.
- Do not use if the bulb or its packaging appears damaged.
- This bulb is designed for indoor use only.
- Tippruvax tiżżarma jew timmodifika l-bozza. Ġewwa m'hemm l-ebda partijiet li jistgħu jiġu rranġati mill-utent.
- Ensure the bulb is securely screwed into the fixture to prevent accidental detachment.
- This bulb is non-dimmable. Do not use with dimmer switches, as this may cause damage or malfunction.
- Vol operattivtage is 220-240 volts. Ensure your fixture's voltage jaqbel ma' dan ir-rekwiżit.
3. Setup u Installazzjoni
3.1 Disimballaġġ
Carefully remove the LED bulbs from their packaging. Inspect each bulb for any visible damage before installation.
3.2 Passi ta' Installazzjoni
- Itfi l-Enerġija: Locate the light switch or circuit breaker controlling the fixture where the bulb will be installed and turn it off.
- Ipprepara l-Apparat: If replacing an old bulb, allow it to cool completely before carefully unscrewing it from the fixture.
- Installa Bozza Ġdida: Gently screw the PHILIPS Stellar Bright 16W LED Bulb into the B22D base socket. Turn clockwise until it is snug, but do not overtighten.
- Irrestawra l-Enerġija: Erġa' ixgħel il-provvista tal-enerġija mis-swiċċ jew mis-circuit breaker.
A close-up view of the PHILIPS Stellar Bright 16W LED Bulb, highlighting its standard A-shape and B22D bayonet cap base, ready for installation.
4. Istruzzjonijiet Operattivi
Operating the PHILIPS Stellar Bright 16W LED Bulb is straightforward:
- Power On/Off: Use your standard wall switch to turn the light on or off.
- Mhux Dimmable: This LED bulb is designed to operate at full brightness only and is not compatible with dimmer switches. Using it with a dimmer may lead to flickering, reduced lifespan, or damage to the bulb.
This graphic illustrates the main benefits of the PHILIPS Stellar Bright 16W LED Bulb, including up to 82% energy saving, 16W power consumption, LED technology, and EyeComfort Technology for reduced eye strain.
5. Manutenzjoni
The PHILIPS Stellar Bright 16W LED Bulb requires minimal maintenance:
- Tindif: Ensure the power is off and the bulb is cool before cleaning. Use a soft, dry, lint-free cloth to wipe the bulb. Do not use liquid or abrasive cleaners.
- Sostituzzjoni: When the bulb reaches the end of its operational life, replace it with a new PHILIPS Stellar Bright 16W LED Bulb or an equivalent LED bulb with a B22D base.
An image showing the PHILIPS Stellar Bright LED Bulb installed in a wall fixture, illuminating a modern living space with soft, eco-friendly light. The room features a sofa with cushions and a minimalist design.
6 Issolvi l-problemi
If you encounter issues with your PHILIPS Stellar Bright 16W LED Bulb, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-bozza ma tixgħelx | L-ebda qawwa għall-apparat Il-bozza mhux imwaħħla sew Bozza difettuża Tagħmir difettuż | Check the light switch and circuit breaker. Ensure the bulb is securely tightened in the socket. Replace the bulb with a known working one. Have the fixture inspected by a qualified electrician. |
| Teptip tal-bozza | Used with a dimmer switch Konnessjoni maħlula Voltagvarjazzjonijiet | Remove from dimmer circuit; this bulb is non-dimmable. Kun żgur li l-bozza hija ssikkata sew. Ikkonsulta elettriċista jekk il-volumtagIl-kwistjonijiet jippersistu. |
| Il-ħruġ tad-dawl huwa baxx | Bozza mhux korretta wattage for desired brightness Dust or dirt on bulb/fixture | Ensure the 16W bulb meets your brightness requirements. Clean the bulb and fixture as per maintenance instructions. |
The PHILIPS Stellar Bright LED Bulb is shown installed in an outdoor fixture, casting bright, high-quality light over the entrance of a building, demonstrating its suitability for various lighting needs.
7. Speċifikazzjonijiet
Detailed technical specifications for the PHILIPS Stellar Bright 16W LED Bulb:
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | PHILIPS |
| Isem tal-Mudell | StellarBright |
| Numru tal-Mudell | 929001818814_6 |
| Tip Dawl | LED |
| Wattage | 16 Watts |
| Bażi tal-Bozza | B22D |
| Kulur ċar | Kessaħ Daylight |
| Temperatura tal-Kulur | 6500 Kelvin |
| Vol Operattivtage | 220-240 volt |
| Light Output (Maximum) | 1440 Lumens |
| Effiċjenza | 90 lumens per watt, Energy Efficient |
| Ħajja Operattiva tas-Sors tad-Dawl | 15,000 Sigħat |
| Karatteristika Speċjali | Energy Efficient, Non Dimmable |
| Tip ta' Materjal | Polikarbonat (PC) |
| Użu ta 'ġewwa fuq barra | Ġewwa |
| Number of Items (in pack) | 6 Għadd |
| Item Weight (for pack) | 480 Gramm |
This image depicts a family, including parents and children, comfortably relaxing in a bedroom illuminated by the PHILIPS Stellar Bright LED Bulb. The lighting is designed to be gentle on the eyes, promoting well-being.
8. Garanzija u Appoġġ
8.1 Informazzjoni dwar Garanzija
This PHILIPS Stellar Bright 16W LED Bulb comes with a garanzija ta 'sena on the product from the date of invoice. Please retain your purchase receipt as proof of purchase for warranty claims.
8.2 Manufacturer and Importer Contact
For support, warranty claims, or further inquiries, please contact:
Manifattur: Signify Innovations India Limited (formerly known as Philips Lighting India Limited)
PS ARCADIA CENTRAL, 3A, 3rd floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata – 700 017, India
Importatur: Signify Innovations India Limited
PS Arcadia Central, 3A, 3rd Floor, 4A, Abanindranath Thakur Sarani (Camac Street), Kolkata-700017, West Bengal, India