Reloop RP-1000 MK2 Professional Belt Drive Turntable System

1. Introduzzjoni

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Reloop RP-1000 MK2 Professional Belt Drive Turntable System. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage.

The Reloop RP-1000 MK2 is designed for both aspiring DJs and HiFi enthusiasts, offering high-quality audio reproduction through its belt-driven mechanism. This design effectively isolates the platter from motor vibrations, ensuring clear, distortion-free sound. The MK2 version features an enhanced top panel construction, improved metallic buttons, and a pre-fitted Ortofon OM Black pick-up system for immediate playback.

2. Istruzzjonijiet tas-Sigurtà

To ensure safe operation and prolong the life of your turntable, please observe the following safety guidelines:

• Provvista tal-Enerġija: Connect the unit only to an AC outlet with the correct voltage as indicated on the product. Ensure the power cord is not pinched or walked on.
• Umdità: Tesponix l-unità għax-xita, umdità, jew umdità eċċessiva. Tpoġġix oġġetti mimlija b'likwidi, bħal vażuni, fuq l-unità.
• Ventilazzjoni: Aċċerta ruħek li jkun hemm ventilazzjoni adegwata madwar l-unità. Timblokkax il-fetħiet tal-ventilazzjoni.
• Sorsi tas-Sħana: Żomm l-unità 'l bogħod minn sorsi ta' sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
• Tindif: Clean only with a dry cloth. Avoid using liquid cleaners or aerosols.
• Servizzi: Do not attempt to service the unit yourself. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Pjazzament: Place the turntable on a stable, level surface to prevent vibrations and ensure proper tracking.

3. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

• Turntable Platter
• OM Black pick-up system (by Ortofon)
• Qoxra tar-ras
• Slipmat
• Kontrapiż
• Korda tal-Enerġija
• Operating Instruction Manual (this document)

If any items are missing or damaged, please contact your retailer or Reloop customer support immediately.

4. Prodott Aktarview

Familiarize yourself with the main components of your Reloop RP-1000 MK2 turntable.

Figura 4.1: Angolat view of the Reloop RP-1000 MK2 turntable, showcasing the platter, tonearm, and control panel.

Figura 4.2: Minn fuq għal isfel view highlighting the platter, slipmat with Reloop logo, S-shaped tonearm, and pitch control slider.

Figura 4.3: Dettaljat view of the S-shaped tonearm, headshell, and the pre-fitted Ortofon OM Black pick-up system.

Figure 4.4: Close-up of the power knob, start/stop button, and speed selection buttons (33/45 RPM).

Komponenti Ewlenin:

• Platter: Precision-engineered, die-cast aluminum platter for stable rotation.
• Arma tat-ton: Statically balanced S-shaped tonearm with hydraulic lift and anti-skating mechanism.
• Skartoċċ: High-quality OM Black pick-up system by Ortofon, pre-fitted to a headshell.
• Kontroll taż-żift: Adjustable slider with a range of +/-10% for fine speed adjustments.
• Speed Select Buttons: Buttons for selecting 33 1/3 RPM and 45 RPM playback speeds.
• Buttuna Start / Stop: Controls the rotation of the platter.
• Target Light: Extendable aluminum target light to illuminate the needle position in dark environments.
• Shock-absorbing Feet: Improve isolation from unwanted vibrations.

5. Setup

5.1 Spakkjar u Tqegħid

1. Neħħi l-komponenti kollha mill-imballaġġ bir-reqqa. Żomm l-imballaġġ għal trasport jew ħażna fil-futur.
2. Place the turntable on a flat, stable, and level surface, away from direct sunlight, heat sources, and strong magnetic fields.
3. Ensure there is sufficient space around the unit for ventilation.

5.2 Installazzjoni tal-Platt u ċ-Ċinturin

1. Place the platter onto the center spindle. Ensure it sits securely.
2. Locate the drive belt. Carefully stretch the belt around the inner rim of the platter and hook it onto the motor pulley, which is visible through one of the platter's openings.
3. Poġġi l-felt slipmat fuq il-platter.

5.3 Tonearm Setup

The OM Black pick-up system is pre-fitted to the headshell. Follow these steps to balance the tonearm:

1. Attach the headshell with the pre-fitted cartridge to the front end of the tonearm. Secure it by turning the locking ring clockwise.
2. Place the counterweight onto the rear of the tonearm and rotate it until it is approximately centered.
3. Ħoll it-tonearm clamp and lower the tonearm lift.
4. Carefully adjust the counterweight by rotating it forwards or backwards until the tonearm is perfectly balanced and floats horizontally.
5. Once balanced, hold the counterweight steady and rotate only the numbered ring on the front of the counterweight to '0' (zero).
6. Rotate the entire counterweight (including the numbered ring) counter-clockwise to set the recommended tracking force for the Ortofon OM Black cartridge, typically between 1.5 to 2.0 grams. Refer to the cartridge manufacturer's specifications for the precise recommended tracking force.
7. Set the anti-skating dial to the same value as your tracking force.
8. Erġa' lura d-driegħ tat-tone fil-pożizzjoni tiegħu u waħħalha bil-klampi.amp.

5.4 Konnessjonijiet Awdjo u Enerġija

1. Connect the RCA audio cables from the turntable's output to the PHONO input of your ampLififier jew mixer. Kun żgur li l-konnessjonijiet tal-kanal tax-xellug (abjad) u tal-lemin (aħmar) huma korretti.
2. Qabbad il-wajer tal-ert mit-turntable mat-terminal tal-ert fuq tiegħek amplifier jew mixer biex jimminimizza l-ħoss.
3. Plug the power cord into the turntable's power input and then into a suitable AC power outlet.

6. Istruzzjonijiet Operattivi

6.1 Operazzjoni Bażika

1. Qawwa Mixgħul: Turn the power knob clockwise to the "ON" position. The platter will not start spinning until the START/STOP button is pressed.
2. Agħżel Veloċità: Press the "33" or "45" button to select the desired playback speed according to the record you are playing. The corresponding LED will illuminate.
3. Rekord tal-Post: Carefully place a vinyl record onto the platter.
4. Platt tal-Bidu: Press the START/STOP button. The platter will begin to rotate.
5. Pożizzjoni tad-Driegħ tat-Ton: Ħoll it-tonearm clamp. Use the tonearm lift lever to raise the tonearm. Carefully move the tonearm over the desired track on the record.
6. Driegħ t'isfel: Gently lower the tonearm lift lever to allow the stylus to descend onto the record groove.
7. Playing: The audio will now play through your connected audio system.
8. Waqqaf il-Daqq: At the end of the record, or when you wish to stop, use the tonearm lift lever to raise the tonearm, return it to its rest, and secure it with the clamp. Press the START/STOP button to stop the platter rotation.
9. Itfi: Turn the power knob counter-clockwise to the "OFF" position when not in use.

6.2 Using Pitch Control

The pitch control slider allows you to finely adjust the playback speed by +/-10%. Move the slider up or down to increase or decrease the speed. The center detent indicates 0% pitch adjustment (nominal speed).

6.3 Target Light

Press the aluminum target light button to extend the light, illuminating the needle position. This is particularly useful in low-light environments. Press it again to retract the light.

7. Manutenzjoni

7.1 Tindif tal-Unità

• Dejjem skonnettja l-korda tad-dawl qabel it-tindif.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable.
• Għal marki iebsa, d ftitamp Jista' jintuża drapp, segwit immedjatament minn drapp niexef. Evita prodotti tat-tindif jew solventi li joborxu.

7.2 Kura tal-Istilus

• The stylus (needle) is a delicate component. Handle it with extreme care.
• Clean the stylus regularly using a soft brush designed for stylus cleaning, brushing gently from back to front.
• A worn or dirty stylus can damage your records and degrade sound quality. Replace the stylus when signs of wear are apparent (e.g., distorted sound, skipping).

7.3 Sostituzzjoni taċ-Ċinturin

The belt is a wear-and-tear part. If you notice inconsistent speed or the platter not spinning, the belt may need replacement. Contact Reloop support or an authorized service center for replacement belts and instructions.

7.4 Dust Cover Care (if applicable)

If your turntable includes a dust cover, clean it with a soft, damp cloth. Avoid using dry cloths as they can scratch the acrylic surface. Do not use harsh chemicals.

8 Issolvi l-problemi

Before contacting support, please refer to the following common issues and their solutions:

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

10.1 Informazzjoni dwar Garanzija

Reloop products are manufactured to the highest quality standards. This product comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Reloop websit għal termini u kundizzjonijiet dettaljati tal-garanzija applikabbli għar-reġjun tiegħek.

Żomm il-prova tax-xiri tiegħek (irċevuta jew fattura) għax tkun meħtieġa għal kwalunkwe talba ta' garanzija.

10.2 Appoġġ għall-Klijent

Should you encounter any issues not covered in the troubleshooting section, or require further assistance, please contact Reloop customer support or your authorized dealer. Contact information can typically be found on the official Reloop webis-sit jew fuq l-imballaġġ tal-prodott tiegħek.

For the latest information, FAQs, and support resources, please visit the official Reloop websit: www.reloop.com