Vanxse CCTV Mini Bullet Security Camera (Model MB18) Instruction Manual

1. Introduzzjoni

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Vanxse CCTV Mini Bullet Security Camera, Model MB18. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

2. Prodott Aktarview

The Vanxse MB18 is a compact analog security camera designed for indoor surveillance. It features a 1/3 CCD sensor, 1000TVL resolution, and a 3.6mm wide-angle lens, providing clear images during the day. Its metal housing and included bracket allow for versatile mounting.

Karatteristiċi ewlenin:

1/3 CCD 1000TVL HD Mini Bullet Camera
Built-in 3.6mm wide angle lens
Durable metal case with wall mount bracket
NTSC Video Format for broad compatibility
High sensitivity for clear images in various lighting conditions
Analog output for direct connection to DVRs or CCTV monitors

Kontenut tal-Pakkett:

Vanxse CCTV Mini Bullet Security Camera (MB18)
Ħitan Mount Bracket
Viti tal-Immuntar u Plugs tal-Ħajt

Vanxse Mini Bullet Camera and accessories — Image 2.1: Vanxse Mini Bullet Camera with included mounting hardware (screws and wall plugs).

Vanxse Mini Bullet Camera features and dimensions — Immaġni 2.2: Fuqview of the Vanxse Mini Bullet Camera, highlighting its metal housing, 3.6mm wide lens, DC12V power input, and BNC video output. Dimensions are approximately 75mm length and 20mm diameter for the camera body, with a 50mm height including the bracket.

3. Istruzzjonijiet ta' Setup

Follow these steps to properly set up your Vanxse Mini Bullet Security Camera.

3.1 Immuntar tal-Kamera

Agħżel Post: Choose an indoor location that provides the desired viewing angle and is within reach of power and video cables. Ensure the surface is stable enough to support the camera.
Immarka Toqob tat-Tħaffir: Position the wall mount bracket against the chosen surface and mark the locations for drilling.
Drill toqob: Use an appropriate drill bit to create holes at the marked locations. Insert the provided wall plugs if mounting into drywall or masonry.
Bracket Sikur: Attach the wall mount bracket to the surface using the provided screws.
Waħħal il-Kamera: Secure the camera to the bracket. Adjust the camera angle as needed and tighten the locking mechanism on the bracket to fix its position.

Vanxse Mini Bullet Camera mounted on a surface — Image 3.1: The Vanxse Mini Bullet Camera securely mounted on its adjustable bracket, ready for connection.

3.2 Konnessjoni tal-Kamera

The camera requires a 12V DC power supply (not included) and connects via BNC for video output.

Qabbad l-Enerġija: Connect a 12V DC power adapter (not included) to the red power input cable of the camera.
Qabbad il-Vidjo: Connect the yellow BNC video output cable from the camera to your Digital Video Recorder (DVR) or CCTV monitor. Ensure a secure connection.
Qawwa Mixgħul: Plug in the 12V DC power adapter to an electrical outlet. The camera will power on automatically.
Ivverifika s-Sinjal: Check your DVR or monitor for the camera's video feed. If no signal is displayed, refer to the Troubleshooting section.

Diagram showing camera connection to monitor and power — Image 3.2: Connection diagram illustrating how to connect the camera's BNC and DC cables to an extension cable, which then connects to a monitor's BNC input and a power adapter.

3.3 Vidjo ta' Dimostrazzjoni tas-Setup

Video 3.1: A demonstration of unboxing, assembling the camera with its bracket, and connecting it to a monitor to display the video feed. This video illustrates the physical setup and initial connection process.

4. Istruzzjonijiet Operattivi

The Vanxse MB18 camera operates continuously once powered on. Its primary function is to capture and transmit video footage to a connected DVR or monitor.

4.1 Continuous Surveillance

Once connected and powered, the camera will continuously capture video. The footage will be displayed on your connected monitor or recorded by your DVR, depending on your system configuration.

4.2 Day and Night Operation

The camera is designed to provide clear color images during the day. While it has high sensitivity for low-light conditions, it does not feature infrared (IR) night vision. For optimal night surveillance, ensure adequate external lighting in the monitored area.

Illustration of camera's day and night vision capabilities — Image 4.1: An illustration depicting the camera's view during daytime (clear image) and nighttime (requiring external light for visibility).

4.3 Motion Detection (with compatible DVR)

If connected to a DVR with motion detection capabilities, you can configure the DVR to record only when motion is detected. Refer to your DVR's manual for specific settings.

5. Manutenzjoni

Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-kamera tas-sigurtà tiegħek.

Tindif: Gently wipe the camera lens and body with a soft, dry cloth to remove dust and smudges. Avoid abrasive cleaners or solvents.
Spezzjoni tal-Cable: Periodically check all cables and connections for wear, damage, or loose fittings. Ensure connections remain secure.
Stabbiltà tal-Immuntar: Verify that the camera's mounting bracket is still securely fastened and the camera's position has not shifted.
Protezzjoni Ambjentali: Although the camera has a metal housing, it is primarily designed for indoor use. Protect it from direct exposure to harsh weather conditions, extreme temperatures, and excessive moisture.

6 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bil-kamera tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin.

Problema	Kawża Possibbli	Soluzzjoni
No video signal on monitor/DVR	Konnessjonijiet tal-kejbil sfużi jew mhux korretti No power to the camera Incompatible video format Faulty camera or cable	Check all BNC and power connections. Ensure they are secure. Verify the 12V DC power adapter is plugged in and functioning. Confirm your DVR/monitor supports NTSC video format. Test with a different cable or power adapter if available.
Immaġini mċajpra jew mhux ċara	Lenti maħmuġa Insufficient lighting (especially at night) Camera out of focus (unlikely for fixed lens) Interferenza	Naddaf il-lenti tal-kamera b'ċarruta ratba. Ensure adequate lighting in the monitored area, particularly during low-light conditions. Check for strong electromagnetic interference near the camera or cables.
Il-kamera ma tixgħelx	Ebda provvista ta 'enerġija konnessa Adapter tal-enerġija difettuż Kwistjoni tal-iżbokk tal-enerġija	Ensure the 12V DC power adapter is correctly connected to the camera and a working power outlet. Test the power adapter with another device or use a different 12V DC adapter.

7. Speċifikazzjonijiet

Detailed technical specifications for the Vanxse CCTV Mini Bullet Security Camera, Model MB18.

Karatteristika	Speċifikazzjoni
Numru tal-Mudell	MB18
Sensor tal-Immaġni	1/3 CCD
Riżoluzzjoni	1000TVL (NTSC: 976(H)x494(V))
Lenti	3.6mm Wide Angle
Format tal-vidjo	NTSC
Teknoloġija tal-Konnettività	CCTV (Analog)
Sors tal-Enerġija	AC/DC (12 Volt)
Wattage	6 watt
Materjal	Metall
Tip ta 'Immuntar	Mount Wall
Użu fuq ġewwa/barra	Indoor (IP54 rating suggests limited outdoor protection, but product description emphasizes indoor)
Piż tal-oġġett	4.6 uqija
Dimensjonijiet tal-Pakkett	4.06 x 3.03 x 2.13 pulzieri
UPC	704256526269

8. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok ikkuntattja lill-bejjiegħ jew lill-manifattur direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

You can visit the official Vanxse store for more information and products: Vanxse Store

Vanxse MB18