Introduzzjoni
This manual provides instructions for the safe and effective operation and maintenance of your INSIZE 1108-150 Electronic Caliper. Please read this manual thoroughly before use and retain it for future reference.
Figura 1: Quddiem view of the INSIZE 1108-150 Electronic Caliper, showing the digital display, measurement jaws, and control buttons.
Prodott Overview
The INSIZE 1108-150 is a precision electronic caliper designed for accurate dimensional measurements. It features a clear digital display and is constructed from durable stainless steel.
Karatteristiċi ewlenin:
- Measurement Range: 0-6 inches / 0-150 mm
- Riżoluzzjoni: 0.0005 pulzieri / 0.01 mm
- Accuracy: ±0.0008 inches
- Funzjoni ta 'power off awtomatika
- Inch/millimeter conversion
- Zero setting at any position
- Data output capability
- Kostruzzjoni ta 'l-istainless steel
Figura 2: Technical diagram illustrating the INSIZE 1108-150 Electronic Caliper's dimensions and key specifications.
Figura 3: Lura view of the INSIZE 1108-150 Electronic Caliper, displaying the serial number and the battery compartment location.
Kontenut tal-Pakkett
Malli tiftaħ il-pakkett, ivverifika li l-oġġetti kollha huma preżenti u mhux imħassra:
- INSIZE 1108-150 Electronic Caliper (Main Unit)
- Batterija CR2032 (installata minn qabel jew inkluża separatament)
- Hard Plastic Storage Case
- Manwal ta' Istruzzjoni tat-Tħaddim
- Ċertifikat ta' Spezzjoni
Figura 4: The INSIZE 1108-150 Electronic Caliper, its instruction manual, and inspection certificate neatly stored within its protective hard plastic case.
Setup
Installazzjoni tal-batterija
The caliper uses one CR2032 battery. If the display does not turn on or shows a low battery indicator, replace the battery.
- Locate the battery compartment cover on the digital unit (refer to Figure 3).
- Slide the cover open or use a small tool to gently pry it open.
- Remove the old battery, noting its polarity.
- Daħħal batterija CR2032 ġdida bin-naħa pożittiva (+) tħares 'il fuq.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
Figura 5: The INSIZE 1108-150 Electronic Caliper alongside a CR2032 battery, indicating the battery type required for operation.
Istruzzjonijiet Operattivi
Tixgħel/Jitfi
- Biex Tixgħel: Press the "ON/OFF" button or simply move the digital unit along the beam.
- Biex Tintefa: Press the "ON/OFF" button. The caliper will also automatically power off after a period of inactivity.
Setting Żero
The zero point can be set at any position, allowing for incremental measurements.
- Close the measuring jaws completely for absolute zero, or position the jaws at your desired reference point.
- Press the "ZERO" button. The display will show "0.00" or "0.000".
Konverżjoni ta' Pulzier/Millimetru
To switch between inch and millimeter units:
- Press the "INCH/MM" button. The display will toggle between the two units.
Teħid tal-Kejl
- Ensure the caliper is clean and the jaws are free of debris.
- Turn on the caliper and set the zero point as needed.
- Gently open the jaws and position the workpiece between the appropriate measuring surfaces (outside jaws for external dimensions, inside jaws for internal dimensions, or depth rod for depth measurements).
- Close the jaws until they make firm, but not excessive, contact with the workpiece.
- Aqra l-kejl direttament mid-displej diġitali.
Figura 6: A user demonstrating the measurement of an external diameter on a cylindrical metal part using the INSIZE 1108-150 Electronic Caliper.
Manutenzjoni
Tindif
- Regularly clean the measuring surfaces and the beam with a clean, dry, lint-free cloth.
- Avoid using solvents or abrasive cleaners, as these can damage the display or measuring surfaces.
- Keep the digital unit dry. While the caliper is made of stainless steel, the electronic components are not waterproof.
Ħażna
- Store the caliper in its protective hard plastic case when not in use to prevent damage.
- Store in a dry environment, away from direct sunlight and extreme temperatures.
- Slightly open the jaws before storing to relieve tension on the measuring surfaces.
Figura 7: The INSIZE 1108-150 Electronic Caliper resting securely within its custom-fit hard plastic storage case, ready for protection when not in use.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-wiri ma jixgħelx. | Batterija mejta jew installata ħażin. | Ibdel il-batterija CR2032, filwaqt li tiżgura l-polarità korretta. |
| Qari mhux preċiż jew li jvarja. | Dirt/debris on measuring surfaces or beam; low battery; damaged sensor. | Clean the caliper thoroughly. Replace battery. If problem persists, contact support. |
| "ZERO" button not responding. | Button malfunction or electronic issue. | Ensure battery is fully charged. If problem persists, contact support. |
| Automatic power off not working. | Ħsara elettronika. | Ikkuntattja l-appoġġ. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | 1108-150 |
| Medda ta' Kejl | 0-6 pulzieri / 0-150 mm |
| Riżoluzzjoni | 0.0005 pulzier / 0.01 mm |
| Eżattezza | ±0.0008 inches |
| Materjal | Stainless Steel |
| Tip ta 'batterija | CR2032 (1 inklużi) |
| Funzjonijiet | ON/OFF, ZERO, Inch/mm conversion, Data Output |
| Qawwa Awtomatika Mitfi | Iva |
| Dimensjonijiet tal-Prodott | 10.28" L x 4.09" W x 1.3" H |
| Piż | 13.67 uqija |
Figura 8: A dettaljata view of the INSIZE Inspection Certificate, confirming the calibration and accuracy of the Digital Caliper model 1108-150.
Garanzija u Appoġġ
INSIZE products are manufactured to high standards and undergo strict quality control. For warranty information, technical support, or service, please refer to the contact details provided in the included warranty certificate or visit the official INSIZE websit.
INSIZE Contact Information:
- INSIZE USA: www.insize.com
- Refer to your product's specific warranty card for regional contact details.