Stack-On QAS-1512-B Quick Access Safe with Biometric Lock User Manual

Introduzzjoni

The Stack-On QAS-1512-B Quick Access Safe provides secure storage with rapid access through its biometric locking system. Designed for convenience and security, this safe allows for quick retrieval of contents using a registered fingerprint. It also includes a backup key for alternative access. The interior is foam-padded to protect valuables, and the safe is equipped with pre-drilled holes and hardware for secure mounting to a floor, wall, or shelf.

Figura 1: Quddiem view of the Stack-On QAS-1512-B Quick Access Safe.

Informazzjoni dwar is-Sigurtà

• Always keep the backup keys in a secure location away from the safe and out of reach of children.
• Do not store the backup keys inside the safe.
• Kun żgur li s-sejf ikun immuntat sew biex tevita li jitneħħa mingħajr awtorizzazzjoni.
• Keep the safe closed and locked when not in use.
• This safe is designed to deter theft and provide quick access to contents; it is not fireproof or waterproof.
• Do not allow children to play with or around the safe.

Kontenut tal-Pakkett

Verify that all items are present before proceeding with installation and setup:

• Stack-On QAS-1512-B Quick Access Safe
• Ċwievet tal-Backup (2)
• Batteriji AA (4)
• Xkaffa li tista' titneħħa
• Fastening Hardware (for mounting)
• Manwal għall-Utent (dan id-dokument)

Figura 2: Intern view showing the removable shelf and foam-padded interior.

Setup

1. Installazzjoni tal-batterija

1. Locate the battery compartment, typically on the inside of the safe door or back panel.
2. Daħħal 4 batteriji AA, filwaqt li tiżgura polarità korretta (+/-).
3. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

2. Immuntar tas-Sejf

The safe features pre-drilled holes for secure mounting to a floor, wall, or shelf. Use the provided fastening hardware.

1. Choose a secure and discreet location for mounting.
2. Mark the drilling points through the pre-drilled holes on the safe.
3. Ħaffer toqob pilota fil-wiċċ tal-immuntar.
4. Align the safe with the pilot holes and secure it using the fastening hardware.
5. Kun żgur li s-safe huwa mwaħħal sew u ma jistax jitneħħa faċilment.

Figura 3: Eżample of the safe mounted securely inside a closet.

3. Initial Fingerprint Enrollment

Importanti: When you first receive your safe, it is in a factory default state where any fingerprint can open it. For security, you għandu record at least one fingerprint. Failure to do so will compromise the safe's security.

The safe can store up to 20 different fingerprints. For optimal performance, each user should register only one thumb or index finger.

1. Open the safe using the provided backup key.
2. Locate the reset button on the inside of the safe.
3. Press and release the reset button. You will hear two beeps, see two flashes of blue light, and the scanner will turn blue.
4. Place your chosen finger on the scanner until the safe beeps once and a green light flashes.
5. Immediately place the l-istess finger on the scanner for a second time until there is one beep and a green light flash.
6. Poġġi l- l-istess finger on the scanner for a third and final time, holding it in the same position until there are two beeps and two green light flashes.
7. Your fingerprint is now recorded. Test the registered fingerprint to ensure it opens the safe.

Figura 4: Fuq view highlighting the biometric scanner.

For a visual guide on fingerprint enrollment, please refer to the official product video below:

Istruzzjonijiet Operattivi

Ftuħ bil-marki tas-swaba'

1. Place a registered finger on the biometric scanner.
2. The safe will beep and the light will turn green, indicating successful recognition.
3. Il-bieb tas-safe jinfetaħ awtomatikament.

Opening with Backup Key

1. Locate the keyhole, usually concealed near the biometric scanner.
2. Insert the backup key and turn it to unlock the safe.
3. Open the safe door manually.

Żieda ta' Marki tas-Swaba' Addizzjonali

To add more fingerprints (up to 20 total), repeat the "Initial Fingerprint Enrollment" steps for each new finger or user.

Deleting All Fingerprints

To delete all stored fingerprints and reset the safe to its factory default (any fingerprint opens), press and hold the reset button for approximately 5 seconds until you hear a long beep and the lights flash. All previously registered fingerprints will be erased.

Manutenzjoni

• Sostituzzjoni tal-batterija: Replace all 4 AA batteries annually or when the low battery indicator (if present) illuminates. Use only new, high-quality alkaline batteries.
• Tindif: Imsaħ il-barra tas-sejf b'ċarruta ratba u damp cloth. Do not use abrasive cleaners or solvents. Keep the biometric scanner clean and free of dirt or oils for optimal performance.
• Ħażna taċ-Ċwievet: Periodically check the location of your backup keys to ensure they are secure and accessible in case of battery failure or biometric system issues.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Stack-On websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

For further assistance, you may contact Stack-On customer service directly. Contact details are typically available on the manufacturer's websit jew fl-ippakkjar tal-prodott.