EWT Clima 903 TLS Fan Heater Instruction Manual

Informazzjoni Importanti dwar is-Sigurtà

Please read this instruction manual carefully before using the EWT Clima 903 TLS fan heater. Keep this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• Dejjem kun żgur li l-heater jitqiegħed fuq wiċċ stabbli u livellat.
• Tgħattix il-ħiter jew tostakolax id-daħliet/ħruġ tal-arja tiegħu.
• Keep flammable materials (curtains, furniture, paper) at least 1 meter (3 feet) away from the heater.
• Do not use the heater in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water. The unit has IP21 drip protection, but it is not fully waterproof.
• Aqla’ l-heater mill-plagg meta ma jkunx qed jintuża jew qabel ma tnaddaf.
• Tħaddimx il-heater b'korda jew plagg bil-ħsara.
• Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew istruzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom.

Setup Istruzzjonijiet

1. Spakkjar: Carefully remove the EWT Clima 903 TLS fan heater from its packaging. Retain the packaging for storage or in case of return.
2. Pjazzament: Place the heater on a firm, level, and heat-resistant surface. Ensure there is adequate clearance around the heater for proper air circulation. Avoid placing it directly under a power outlet. The robust design with metal front and back makes it suitable for environments like garages or workshops.
3. Konnessjoni tal-Enerġija: Ensure the power switch is in the "OFF" position. Plug the power cord into a standard 230 Volt AC electrical outlet. Do not use extension cords unless absolutely necessary and ensure they are rated for the heater's power consumption (up to 3000W).

Figura 1: Quddiem view of the EWT Clima 903 TLS fan heater, showing the protective grille and EWT branding.

Figura 2: Ġenb view of the EWT Clima 903 TLS fan heater, highlighting the integrated carrying handle for portability.

Istruzzjonijiet Operattivi

The EWT Clima 903 TLS fan heater features a control knob for power settings and a thermostat for temperature regulation.

1. Power On/Off u Għażla tal-Modalità:
   • Turn the main control knob to select the desired operating mode:
     • Ventilation (Fan Only): For air circulation without heat.
     • 1500 W: Għal tisħin moderat.
     • 3000 W: Għal tisħin rapidu u qawwi.
   • The LED indicator will illuminate when the heater is operating.
2. Kontroll tat-termostat:
   • Rotate the thermostat knob to set the desired room temperature. The heater will cycle on and off to maintain this temperature.
   • Għal tisħin kontinwu, issettja t-termostat għall-pożizzjoni massima tiegħu.
   • Funzjoni kontra l-iffriżar: If the thermostat is set to the snowflake symbol (*), the heater will automatically turn on if the ambient temperature drops below approximately 5°C (41°F) to prevent freezing. This function remains active even after a power cut.
3. Protezzjoni mis-sħana żejda: The heater is equipped with an automatic overheat protection system. If the heater becomes too hot, it will automatically shut off. If this occurs, unplug the heater, allow it to cool down for at least 10-15 minutes, and check for any obstructions to the air inlets or outlets. Once cooled and obstructions removed, plug it back in and resume operation.
4. Itfi: To turn off the heater, rotate the main control knob to the "OFF" position and unplug it from the power outlet.

Figure 3: Close-up of the control knob on the side of the heater, used for selecting power modes and adjusting the thermostat.

Figura 4: Dettaljat view of the multi-function knob, showing settings for fan-only, 1500W, 3000W, and the thermostat with antifreeze symbol.

Manutenzjoni

Regular cleaning and proper storage will ensure the longevity and efficient operation of your EWT Clima 903 TLS fan heater.

• Tindif:
  • Dejjem aqla’ l-heater u ħallih jiksaħ kompletament qabel ma tnaddfu.
  • Imsaħ l-uċuħ ta 'barra b'artab, damp drapp. Tużax prodotti tat-tindif li joborxu, solventi, jew kimiċi ħarxa, għax dawn jistgħu jagħmlu ħsara lill-finitura.
  • Use a vacuum cleaner with a brush attachment to gently remove dust from the air inlets and outlets. Do not insert any objects into the openings.
• Ħażna:
  • If storing the heater for an extended period, clean it thoroughly and place it back in its original packaging or a protective cover.
  • Aħżen f'post frisk u niexef, 'il bogħod mid-dawl tax-xemx dirett u temperaturi estremi.

Gwida dwar is-sejbien ta 'problemi

Qabel ma tikkuntattja l-appoġġ għall-klijenti, jekk jogħġbok irreferi għall-kwistjonijiet u s-soluzzjonijiet komuni li ġejjin:

Speċifikazzjonijiet tal-Prodott

Figure 5: Dimensional diagram of the EWT Clima 903 TLS fan heater, indicating its height, width, and depth.

Informazzjoni dwar Garanzija

Specific warranty terms and conditions may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information regarding the warranty period and coverage for your EWT Clima 903 TLS fan heater.

Appoġġ għall-Klijent

If you encounter any issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact the retailer where you purchased the product or visit the official EWT website for customer support contact details. When contacting support, please have your model number (Clima 903 TLS) and purchase information readily available.