Progress Lighting P5821-20 1-Light Compact Fluorescent Wall Lantern

1. Prodott Aktarview

The Progress Lighting P5821-20 is a 1-light energy-efficient compact fluorescent wall lantern designed for outdoor use. It features a transitional styling with an antique bronze finish and a matte white acrylic diffuser. This fixture is rated for use in wet locations and complies with California Title-24 requirements, making it suitable for porches, patios, and other exterior wall applications.

This image shows the Progress Lighting P5821-20 1-Light Energy Efficient Compact Fluorescent Wall Lantern in an antique bronze finish, featuring a classic design with a matte white acrylic diffuser.

2. Informazzjoni dwar is-Sigurtà

• TWISSIJA: Skonnettja l-enerġija mis-circuit breaker jew mill-kaxxa tal-fjużijiet qabel l-installazzjoni jew is-servizz.
• Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC). Ikkonsulta elettriċista kwalifikat jekk m'intix familjari mal-konnessjonijiet xierqa tal-wajers elettriċi.
• This product may be subject to California Proposition 65 rules and regulations. For more information, visit www.P65Warnings.ca.gov.
• Do not install this fixture in areas where it may be submerged in water. While rated for wet locations, it is not designed for submersion.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• 1-Light Wall Lantern (P5821-20)
• Matte White Acrylic Diffuser
• Djar tal-Aluminju imħatteb
• Mounting Hardware (typically includes mounting strap, screws, wire nuts)
• Nota: A compact fluorescent light source (bulb) is mhux inklużi u għandhom jinxtraw separatament.

4. Setup u Installazzjoni

Għodod Meħtieġa: Tornavit, strippers tal-wajers, tejp elettriku, nuċċalijiet tas-sigurtà.

1. Itfi l-Enerġija: Before starting, ensure the power to the installation area is completely off at the circuit breaker or fuse box.
2. Ipprepara l-Wajers: Carefully remove the existing fixture (if any) and expose the electrical wires from the junction box.
3. Waħħal iċ-Ċinga tal-Immuntar: Secure the provided mounting strap to the junction box using the screws.
4. Agħmel Konnessjonijiet elettriċi: Connect the fixture's wires to the house wires according to local electrical codes. Typically, connect black to black (live), white to white (neutral), and bare copper or green to bare copper or green (ground). Secure connections with wire nuts and electrical tape.
5. Fixture tal-Immonta: Carefully tuck the wires into the junction box and align the fixture with the mounting strap. Secure the fixture to the mounting strap using the provided screws.
6. Installa s-Sors tad-Dawl: Insert a compatible compact fluorescent bulb (not included) into the fixture's socket. Refer to the specifications for the correct wattage.
7. Irrestawra l-Enerġija: Ladarba l-installazzjoni tkun tlestiet u l-konnessjonijiet kollha jkunu siguri, erġa' daħħal l-enerġija fis-circuit breaker.

Importanti: Jekk m'intix ċert dwar xi parti tal-proċess tal-installazzjoni, ikkonsulta elettriċista kwalifikat.

5. Istruzzjonijiet Operattivi

This wall lantern operates via a standard wall switch connected to its electrical circuit. Once installed and powered, simply toggle the wall switch to turn the light on or off.

• Tip ta' Sors tad-Dawl: Fluworexxenti kompatt
• Wat Massimutage: 13 Watts

6. Manutenzjoni

• Tindif: Biex tnaddaf l-apparat, kun żgur li l-elettriku jkun mitfi. Imsaħ b'ċarruta ratba u nadifa.amp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic diffuser.
• Sostituzzjoni tal-bozza: Ensure power is off before replacing the bulb. Allow the old bulb to cool completely before removal. Replace with a new compact fluorescent bulb of the same type and wattage (13 Watts maximum).
• Spezzjoni: Spezzjona l-apparat perjodikament għal kwalunkwe sinjal ta’ xedd, ħsara, jew konnessjonijiet laxki. Indirizza kwalunkwe problema minnufih.

7 Issolvi l-problemi

If the wall lantern does not operate correctly, perform the following checks:

• Ebda Dawl:
  • Kun żgur li s-swiċċ tal-ħajt ikun fil-pożizzjoni 'ON'.
  • Check the circuit breaker or fuse for the fixture's circuit. Reset if tripped or replace fuse if blown.
  • Verify the light bulb is securely screwed in and is not burnt out. Replace if necessary.
  • Confirm that all electrical connections are secure and properly wired. (TWISSIJA: Turn off power before checking wiring.)
• Dawl Teptip:
  • Check for a loose bulb or loose wiring connections.
  • Ensure the bulb is the correct type and wattage għall-apparat.

If issues persist after performing these checks, consult a qualified electrician.

8. Speċifikazzjonijiet

This image illustrates the dimensions of the P5821-20 wall lantern, measuring 8.75 inches in height, 7.25 inches in length, and 5.75 inches in width.

9. Garanzija u Appoġġ

Dan il-prodott ta' Progress Lighting huwa kopert minn garanzija ta 'sena from the date of purchase. For detailed warranty information, please refer to the official warranty document provided by Progress Lighting, which can typically be found on their website or via the link: https://hubbellcdn.com/warranty/prog_93049973_d_warranty.pdf.

For technical support, replacement parts, or further assistance, please contact Progress Lighting directly. Contact information can usually be found on the manufacturer's webis-sit jew fuq l-imballaġġ tal-prodott.