Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture Instruction Manual

Introduzzjoni

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The P3689-44 fixture features a clean design with elegant lines, complemented by a satin Oxford Silver finish and an etched alabaster style glass shade. Its unique twist-lock shade design allows for easy access for changing light bulbs without external hardware.

Informazzjoni dwar is-Sigurtà

TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mill-kaxxa tal-fjużijiet jew mis-circuit breaker qabel l-installazzjoni jew is-servizz.

ATTENZJONI: For your safety, read and understand the information provided in this manual completely before attempting to assemble, install, or operate this product. Failure to do so could lead to electric shock, fire, or other injuries that could be hazardous or even fatal.

• Il-konnessjonijiet elettriċi kollha għandhom ikunu skont il-kodiċijiet lokali, l-ordinanzi, jew il-Kodiċi Elettriku Nazzjonali (NEC).
• Ikkonsulta elettriċista kwalifikat jekk m'intix ċert dwar il-proċeduri tal-wajers.
• Use only UL/cUL listed wire connectors.
• Taqbiżx il-wat massimutage speċifikat għall-bozoz.
• Kun żgur li l-apparat tad-dawl ikun immuntat sew ma' element strutturali tas-saqaf.

Kontenut tal-Pakkett

Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, contact Progress Lighting customer service before proceeding.

• Korp tal-apparat (1)
• Dell tal-ħġieġ (1)
• Kit tal-ħardwer tal-immuntar (1)
• Manwal ta' struzzjonijiet (1)

Setup u Installazzjoni

Għodod Meħtieġa (Mhux Inklużi):

• Tornavit Phillips
• Tornavit Flathead
• prodotti għat-tqaxxir tal-wajer
• Tejp elettriku
• Nuċċalijiet tas-sigurtà

Passi ta' Installazzjoni:

1. Itfi l-enerġija: Before starting installation, ensure the power to the circuit is turned off at the main fuse box or circuit breaker.
2. Prepare mounting: Attach the mounting bracket to the junction box in the ceiling using the screws provided in the hardware kit. Ensure the bracket is securely fastened.
3. Wiring: Qabbad il-wajers tal-apparat mal-wajers tad-dar skont dan li ġej:
   • Qabbad il- iswed wajer tat-twaħħil għall- iswed wajer tad-dar (sħun).
   • Qabbad il- abjad wajer tat-twaħħil għall- abjad wajer tad-dar (newtrali).
   • Qabbad il- ram vojt wajer tal-apparat (tal-art) mal- ram aħdar jew mikxuf (ground) house wire.
   Assigura l-konnessjonijiet kollha b'konnetturi tal-wajer u keffenhom b'tejp elettriku għal aktar sigurtà.
4. Mount fixture body: Carefully push the wired fixture body up to the ceiling, aligning the screw holes on the fixture with the screws on the mounting bracket. Secure the fixture body in place with the decorative nuts or screws provided.
5. Installa l-bozoz: Insert two (2) 60-watt maximum medium base bulbs (not included) into the sockets. Do not exceed the recommended wattage.
6. Attach glass shade: Align the glass shade with the fixture body and twist it clockwise until it locks securely into place. The unique twist-lock design ensures the shade is held firmly without visible hardware.

Image: The Progress Lighting P3689-44 Two-Light Close-to-Ceiling Fixture, showcasing its Oxford Silver finish and etched alabaster style glass shade. The fixture is designed for flush mounting to the ceiling.

Istruzzjonijiet Operattivi

Once the fixture is fully installed and bulbs are in place, restore power at the main fuse box or circuit breaker. The fixture is operated via a standard wall switch (not included) connected to the circuit.

• Tiżgura l-wat korretttage bulbs (max 60-watt medium base) are used to prevent overheating or damage.
• The fixture is designed for indoor use in dry locations only.

Manutenzjoni

Tindif:

To clean the fixture, ensure power is turned off. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass. For the glass shade, a mild glass cleaner can be used sparingly on a cloth, then wiped dry.

Sostituzzjoni tal-bozza:

To replace bulbs, turn off power at the circuit breaker. Gently twist the glass shade counter-clockwise to remove it. Unscrew the old bulbs and replace them with new 60-watt maximum medium base bulbs. Reattach the glass shade by twisting it clockwise until secure.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

Dan l-apparat tad-Dawl Progress huwa kopert minn Garanzija ta' 1 snin mill-manifattur mid-data tax-xiri. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.

For warranty claims, technical support, or replacement parts, please contact Progress Lighting customer service. Keep your purchase receipt as proof of purchase.

Progress Lighting Customer Service: Refer to the official Progress Lighting webis-sit jew l-imballaġġ tal-prodott għal informazzjoni ta' kuntatt attwali.