enginko Manuals & User Guides

Enginko MCF-LW06424 4 Channel To Lorawan Product Specifications Model: MCF-LW06424 Analog Inputs: 4 inputs, 4-20mA Resolution: 12 bit Insulation: 1000Vdc Protection: Against polarity inversion Power Supply Range: 10-36Vdc or USB…

Enginko. Support. Center MCF-LW06010 Operating Manual Important safety information Read this manual before attempting to install the device! Failure to observe recommendations included in this manual may be dangerous or…

enginko MCF-LW12TERPM Outdoor Environmental Sensor Product Description The MCF-LW12TERPM is a sensor that measures PM (particulate matter) in the air. It can be mounted on a pipe or wall for…

enginko MCF-LW06485 Modbus to LoRaWAN Interface Product Information The MCF-LW06485 is a device manufactured by m2m Germany GmbH, with its address at Am Kappengraben 18-20, 61273 Wehrheim, and contact number…

enginko MCF-LW12TERPM Solar Powered Sensor Important safety information WARNING: Read this manual before attempting to install the device! Failure to observe recommendations included in this manual may be dangerous or…

enginko MCF-LW06CNT LoRaWAN Interface DESCRIPTION MCF-LW06CNT is a LoRaWAN™ interface with one optoisolated digital input that can be used to count pulses or to measure a frequency, up to 2KHz,…

enginko MCF-LW13IO LoRaWAN Wireless Actuator Instruction Manual Important safety information Read this manual before attempting to install the device! Failure to observe recommendations included in this manual may be dangerous…

This operating manual provides detailed instructions for the enginko MCF-LW06485, an RS485 to LoRaWAN interface. It covers installation, connection, setup, configuration via LoRaWEB, Modbus overview, spesifikasi teknikal dan maklumat pematuhan.