1. Pengenalan
This manual provides detailed instructions for the RF1058-20 replacement remote control, designed for compatibility with Leggett & Platt Performance and Mattress Firm 600 Series adjustable bed frames. This remote is a pre-owned, tested unit. To ensure proper functionality, verify that the buttons and their labels on this remote precisely match your original remote control.
2. Persediaan
2.1 Pemasangan Bateri
- Cari petak bateri di belakang alat kawalan jauh.
- Luncurkan penutup petak bateri ke bawah untuk membukanya.
- Insert three (3) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Gantikan penutup petak bateri dengan menggelongsorkannya semula ke kedudukannya sehingga ia berbunyi dengan selamat.
Rajah 1: Belakang view of the RF1058-20 remote control with the battery compartment closed.
Rajah 2: Belakang view of the RF1058-20 remote control with the battery compartment open, revealing three AAA battery slots.
Rajah 3: Terperinci view of the battery compartment cover, displaying model number RF1058-20, regulatory information, and battery type (3x AAA/LR03 1.5V). Regulatory marking: E116103 0214.
2.2 Pairing (If Required)
Most replacement remotes for Leggett & Platt adjustable bases are pre-programmed. If your bed does not respond after battery installation, follow these general pairing steps. Specific pairing instructions may vary slightly by bed model; refer to your bed frame's original manual for precise details if these steps are unsuccessful:
- Ensure the bed frame is plugged into a working power outlet.
- Locate the pairing button on the control box under your bed frame. This button is often small and recessed.
- Press and hold the pairing button on the control box for approximately 3-5 seconds until a light on the control box begins to flash.
- Segera tekan dan tahan RATA button on your new remote control for 3-5 seconds.
- Release the button. The light on the control box should stop flashing, indicating successful pairing.
- Test the remote by pressing various function buttons.
3. Arahan Operasi
The RF1058-20 remote control features a variety of buttons for adjusting your bed frame. Familiarize yourself with each function:
Rajah 4: Depan view of the RF1058-20 remote control with all function buttons.
- HEAD UP / HEAD DOWN: Adjusts the head section of the bed upwards or downwards.
- FOOT UP / FOOT DOWN: Adjusts the foot section of the bed upwards or downwards.
- SNORE: Activates a gentle head elevation to help reduce snoring.
- ZGRAV (Zero Gravity): Positions the bed to a zero-gravity setting, elevating the head and foot to promote circulation and relieve pressure.
- CAHAYA: Toggles the under-bed lighting on or off (if your bed frame is equipped with this feature).
- KUNCI / BUKA KUNCI: Locks or unlocks the remote control to prevent accidental adjustments.
- HIDUP/MATI: Powers the bed frame on or off.
- M1, M2, M3, M4 (Memory Presets): Allows you to save and recall your favorite bed positions. To save a position, adjust the bed to your desired setting, then press and hold the desired memory button (M1-M4) until the bed briefly moves or a light flashes. To recall a saved position, simply press the corresponding memory button.
- FLAT: Mengembalikan katil ke kedudukan yang rata sepenuhnya.
4. Penyelenggaraan
4.1 Penggantian Bateri
Replace batteries when the remote's response becomes sluggish or stops working. Always use fresh AAA batteries. Refer to Section 2.1 for battery installation instructions.
4.2 Pembersihan
Lap alat kawalan jauh dengan kain lembut dan kering. Jangan gunakan pembersih cecair atau bahan yang melelas, kerana ini boleh merosakkan permukaan alat kawalan jauh atau komponen dalaman.
4.3 Penyimpanan
Store the remote in a dry place away from extreme temperatures and direct sunlight. If storing for an extended period, remove the batteries to prevent leakage.
5. Penyelesaian masalah
- Jauh Tidak Menjawab:
- Periksa sama ada bateri dipasang dengan betul dan tidak kehabisan kuasa. Gantikan jika perlu.
- Ensure the bed frame is properly plugged into a working power outlet.
- Verify that the remote is not in 'LOCK' mode. Press the LOCK/UNLOCK button to toggle.
- Attempt to re-pair the remote control with the bed frame (refer to Section 2.2).
- Bed Only Moves Partially or Jerkily:
- Check for any obstructions under the bed frame that might be impeding movement.
- Ensure the power cord is securely connected to both the wall outlet and the bed frame's control box.
- Remote Buttons Feel Sticky or Unresponsive:
- Bersihkan alat kawalan jauh seperti yang diterangkan dalam Bahagian 4.2.
6. Spesifikasi
- Nombor Model: RF1058-20
- Dimensi Produk: 7 x 2 x 0.5 inci
- Berat Barang: 4 auns
- Bateri Diperlukan: 3 bateri AAA
- Pengeluar: Leggett & Platt (for compatible bed frames)
- Peranti Serasi: Leggett & Platt Performance/Mattress Firm 600 Series Bed Frames
- Ciri Khas: Ergonomic, Lightweight
- warna: Hitam/Putih
- Bilangan Maks Peranti yang Disokong: 1
7. Waranti & Sokongan
As a pre-owned replacement part, this remote control may not carry a direct manufacturer's warranty from Leggett & Platt. Please refer to the seller's return policy or any specific warranty information provided at the time of purchase.
For technical assistance or warranty support related to this specific remote control, please contact:
Warranty Support: 844.628.8376
When contacting support, please have your remote control model number (RF1058-20) and purchase details available.
