HOMCOM Criss Cross Office Chair with Flip-up Armrests (Model: 921-890V00CW)

pengenalan

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new HOMCOM Criss Cross Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Rajah 1: The HOMCOM Criss Cross Office Chair in Cream White. This image displays the chair's overall design, including the wide seat, flip-up armrests, and five-star base with casters.

Maklumat Keselamatan

• Pastikan semua bahagian ada dan tidak rosak sebelum pemasangan. Jangan gunakan jika mana-mana bahagian hilang atau rosak.
• Ikut arahan pemasangan dengan teliti. Pemasangan yang salah boleh mengakibatkan ketidakstabilan dan kecederaan.
• Jangan berdiri di atas kerusi. Gunakannya hanya untuk duduk.
• Jangan melebihi kapasiti berat maksimum 265 lbs (120 kg).
• Keep children away from moving parts during assembly and operation.
• Periksa semua bolt dan skru secara berkala untuk memastikan ia ketat. Ketatkan semula jika perlu.
• Elakkan meletakkan kerusi di bawah cahaya matahari langsung atau berhampiran sumber haba untuk mengelakkan degradasi bahan.

Senarai Bahagian

Sebelum memulakan pemasangan, sahkan bahawa semua komponen yang disenaraikan di bawah terdapat di dalam pakej anda.

• Bantal Tempat Duduk (1)
• Tempat letak belakang (1)
• Tempat letak tangan (2)
• Silinder Angkat Gas (1)
• Penutup Pengangkat Gas (1)
• Five-Star Base (1)
• Kastor (5)
• Plat Mekanisme (1)
• Pek Perkakasan (Bolt, Pencuci, Sepana Allen)

Persediaan dan Perhimpunan

Follow these steps to assemble your HOMCOM Criss Cross Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Pasang Kastor ke Pangkalan: Masukkan setiap satu daripada lima roda pemukul ke dalam lubang di hujung setiap kaki tapak lima bintang. Tolak dengan kuat sehingga ia klik pada tempatnya.
2. Masukkan Pengangkat Gas: Place the gas lift cylinder into the center hole of the five-star base. Cover the gas lift with the gas lift cover.
3. Pasang Plat Mekanisme pada Tempat Duduk: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided bolts and an Allen wrench. Ensure the front of the mechanism faces the front of the seat.
4. Pasangkan Tempat Letak Tangan pada Tempat Duduk dan Tempat Sandar: Attach the armrests to the sides of the seat cushion and the backrest using the provided bolts. Do not fully tighten all bolts until all components are aligned.
5. Sambungkan Tempat Duduk ke Lif Gas: Letakkan tempat duduk dan penyandar yang telah dipasang dengan berhati-hati pada silinder pengangkat gas, pastikan lubang tengah plat mekanisme sejajar dengan bahagian atas pengangkat gas. Tekan ke bawah dengan kuat untuk memastikan ia kukuh.
6. Pengetatan Akhir: Once all parts are assembled and aligned, fully tighten all bolts.

Rajah 2: belakang view of the assembled chair, demonstrating the backrest and armrest attachment points. This image shows the chair's back and the structure of the armrests.

Arahan Operasi

Familiarize yourself with the various adjustments available on your HOMCOM office chair to optimize your comfort and posture.

1. Pelarasan Ketinggian Tempat Duduk

Untuk menyesuaikan ketinggian tempat duduk:

• To raise the seat: While standing, pull the lever located under the right side of the seat upwards. The seat will rise automatically. Release the lever at the desired height.
• Untuk menurunkan tempat duduk: Semasa duduk, tarik tuil yang terletak di bawah sebelah kanan tempat duduk ke atas. Tempat duduk akan diturunkan. Lepaskan tuil pada ketinggian yang dikehendaki.

2. Tilt Function and Tension Adjustment

The chair features a tilt function for reclining and relaxation.

• Engage/Disengage Tilt: Pull the same lever (used for height adjustment) outwards to unlock the tilt function, allowing the chair to rock. Push the lever inwards to lock the chair in an upright position.
• Laraskan Ketegangan Kecondongan: Rotate the round knob located under the front-center of the seat. Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).

Rajah 3: Visual guide for the tilt function and tension adjustment. This image shows how to engage/disengage the tilt and adjust the tension knob for personalized reclining comfort.

3. Tempat Letak Tangan Boleh Dilipat

The armrests can be flipped up to save space or allow for closer access to your desk.

• To flip up: Gently lift each armrest upwards until it locks into a vertical position.
• To lower: Gently pull the armrest slightly upwards and then push it downwards to return to the horizontal position.

Rajah 4: Illustration of the flip-up armrest feature. This image shows the chair with armrests in both the down (in use) and up (unused, space-saving) positions.

4. Pusing dan Mobiliti

The chair features a 360° swivel and smooth-rolling casters for easy movement.

• The seat can rotate freely in a full circle.
• The PU casters are designed for smooth movement across various floor types, including wooden floors, carpets, and marble floors, without causing damage.

Rajah 5: Close-up of the chair's five-star base with PU wheels, highlighting the 360° swivel and quiet operation. This image illustrates the chair's mobility features and suitability for different floor types.

5. Criss-Cross Sitting

The wide U-shaped seat is designed to accommodate cross-legged sitting for enhanced comfort during long periods.

Rajah 6: A person comfortably sitting cross-legged on the chair, demonstrating the spacious U-shaped seat design. This image highlights the chair's unique feature for flexible sitting postures.

Penyelenggaraan

• Pembersihan: Lap bersih dengan iklanamp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the velvet-feel fabric or metal finish.
• Pemeriksaan Pengikat: Periodically check all bolts and screws for tightness. Retighten as needed to maintain stability and safety.
• Penjagaan Kastor: Pastikan roda bebas daripada rambut dan serpihan untuk memastikan penggulungan yang lancar.
• Lif Gas: The gas lift is a sealed unit and requires no maintenance. If it fails to function, contact support.

Menyelesaikan masalah

Spesifikasi

Rajah 7: Diagram illustrating the key dimensions of the office chair, including width, depth, height, seat size, and armrest height. This image provides precise measurements for user reference.

Waranti dan Sokongan

For warranty information, product support, or to inquire about replacement parts, please contact the manufacturer directly.

Pengeluar: Aosom Kanada

Maklumat Hubungan:

• lokasi: Markham, Ontario, CA
• telefon: 1-416-792-6088

Sila berikan nombor model anda (921-890V00CW) and purchase details ready when contacting support.