Einhell Professional GP-PS 18/20 Li BL-Solo Power X-Change Cordless Pruning Saw

1. Produk Lebihview

The Einhell Professional GP-PS 18/20 Li BL-Solo is a versatile and compact cordless pruning saw designed for cutting back and shaping trees and shrubs, shredding green waste, and cutting small sections of wood. As part of the Einhell Power X-Change family, it is compatible with all batteries and chargers from this series. This tool features a brushless motor for enhanced power and extended operating time compared to traditional carbon brush motors. Its compact and lightweight design, combined with a 15 cm cutting length and a chain speed of up to 8 m/s, makes it ideal for flexible garden use.

Figure 1: The Einhell Professional GP-PS 18/20 Li BL-Solo cordless pruning saw, shown with a compatible Power X-Change battery.

2. Arahan Keselamatan

Always observe the following safety precautions when operating the pruning saw to prevent injury and damage.

Amaran Keselamatan Am

• Baca Manual: Thoroughly read and understand all instructions and safety warnings before use.
• Pakai Alat Pelindung Diri (PPE): Always wear safety glasses, hearing protection, gloves, and sturdy footwear.
• Pastikan Kawasan Kerja Kosong: Ensure the work area is free from obstacles, debris, and bystanders.
• Elakkan Keadaan Basah: Do not operate the pruning saw in rain or damp persekitaran.
• Bahan Kerja Selamat: Always ensure the material being cut is stable and cannot shift during operation.
• Two-Hand Operation: Always hold the pruning saw firmly with both hands during operation.
• Pencegahan Sogokan: Be aware of potential kickback and avoid cutting with the tip of the guide bar.

3. Komponen Produk

Familiarize yourself with the main components of your cordless pruning saw:

Figure 2: Labeled diagram highlighting key features and components of the pruning saw.

• Guide Bar and Chain: High-quality cutting components for precise cuts.
• Pengawal Tangan: Integrated for user safety during operation.
• Foldable Chain Cover: Provides additional safety and protection.
• Motor tanpa berus: Delivers powerful and efficient performance.
• Tombol Penegangan Rantai Bebas Alat: For easy adjustment of chain tension.
• Takungan Minyak: Untuk pelinciran rantai automatik.
• Ergonomic Handle with Softgrip: Ensures comfortable and secure handling.

4. Persediaan dan Pemasangan

4.1. Pemasangan Bateri

1. Ensure the pruning saw is switched off.
2. Align the Power X-Change battery with the battery slot on the tool.
3. Luncurkan bateri ke dalam slot sehingga ia mengklik pada tempatnya dengan selamat.
4. Untuk mengeluarkan, tekan butang pelepas pada bateri dan luncurkannya keluar.

4.2. Guide Bar and Chain Assembly

1. Letakkan palang panduan pada stud pelekap.
2. Carefully fit the chain around the sprocket and into the guide bar groove. Ensure the cutting edges of the chain are facing the correct direction.
3. Close the chain cover and secure it.

Figure 3: Proper installation of the guide bar and chain.

4.3. Ketegangan Rantai

The pruning saw features tool-free chain tensioning for convenience.

1. Loosen the locking knob on the side of the saw.
2. Turn the red adjustment knob to increase or decrease chain tension. The chain should be snug against the guide bar but still able to be pulled freely by hand.
3. Once tension is correct, tighten the locking knob firmly.

Figure 4: Adjusting chain tension using the tool-free knob.

4.4. Filling the Oil Reservoir for Automatic Lubrication

The pruning saw has an automatic chain lubrication system. Ensure the oil reservoir is filled before each use.

1. Cari penutup takungan minyak.
2. Unscrew the cap and use the provided filling funnel to pour appropriate chain oil into the reservoir.
3. Do not overfill. Replace the cap securely.

Figure 5: Filling the oil reservoir for automatic chain lubrication.

5. Operasi

5.1. Bermula dan Berhenti

• To start: Press the safety lock-off button and then squeeze the trigger switch.
• Untuk berhenti: Lepaskan suis pencetus.

5.2. Teknik Memotong

Always maintain a firm grip with both hands. Position yourself securely and ensure the workpiece is stable.

• Pemangkasan Cawangan: Support the branch if necessary to prevent it from pinching the chain. Make relief cuts if the branch is heavy.
• Cutting Logs: Place the log on a stable surface or sawhorse. Avoid cutting into the ground.
• Elakkan Sogokan: Never cut with the tip of the guide bar. Always use the bottom edge of the guide bar for cutting.

Figure 6: Demonstrating the pruning saw in action, cutting a log.

6. Penyelenggaraan dan Penjagaan

Penyelenggaraan yang kerap memastikan prestasi optimum dan memanjangkan hayat gergaji pemangkasan anda.

6.1. Pembersihan

• Sentiasa keluarkan bateri sebelum membersihkan.
• Use a brush or compressed air to remove sawdust and debris from the guide bar, chain, and motor housing.
• Lap bahagian luar dengan iklanamp kain. Jangan gunakan bahan kimia yang keras.

6.2. Mengasah dan Mengganti Rantai

• A dull chain reduces cutting efficiency and increases kickback risk. Sharpen the chain regularly or replace it when necessary.
• The chain and guide bar can be replaced without tools by following the assembly instructions in Section 4.2.

6.3. Oiling System Check

• Regularly check the oil level in the reservoir.
• Ensure the automatic lubrication system is functioning by observing oil spray from the chain during operation.

7. Panduan Penyelesaian Masalah

Rujuk jadual ini untuk isu biasa dan penyelesaiannya:

8. Spesifikasi Teknikal

9. Waranti dan Sokongan Pelanggan

Einhell offers a 10-year warranty on the brushless motor after online registration. For warranty claims, technical assistance, or spare parts, please contact Einhell customer support.

Hubungan Pengilang:
Eschenstr. 6
94405 Landau an der Isar
Jerman

Please visit the official Einhell website for the most up-to-date contact information and warranty registration details.