OBET Indoor Outdoor Thermometer User Manual

pengenalan

The OBET Indoor Outdoor Thermometer (Model B61) provides accurate temperature readings for both indoor and outdoor environments. Equipped with a high-precision sensor, it offers reliable monitoring with a remote transmission range of up to 500 feet (150 meters). Its clear display and simple operation make it an ideal solution for monitoring temperatures in various locations around your home, patio, or garden.

Apa yang ada dalam Kotak

• Temperature Monitor (Main Display Unit)
• Wireless Sensor (Outdoor Unit)
• Operating Instructions (This Manual)

Persediaan

Pemasangan Bateri

The thermometer requires batteries for both the main display unit and the wireless sensor. Batteries are not included.

1. Insert 2x AA batteries into the wireless sensor unit. Ensure correct polarity (+/-).
2. Insert 2x AAA batteries into the main display unit. Ensure correct polarity (+/-).

Figure 1: Battery installation for the wireless sensor and the main display unit. Always insert sensor batteries first.

Initial Pairing and Placement

After battery installation, the units will automatically attempt to pair. This process typically takes about 30 seconds. For optimal performance, consider the following placement guidelines:

• Sensor Tanpa Wayar: Mount the sensor vertically in a location that is not exposed to direct sunlight or rain. Avoid placing it directly on the ground. The sensor can transmit up to 500 feet (150 meters).
• Unit Paparan Utama: Place the display unit indoors in a convenient location such as a living room, bedroom, or office. It features a kickstand for easy tabletop placement.

Figure 2: Proper placement of the wireless sensor. Mount vertically, avoid ground, sun, and rain exposure.

Figure 3: The main display unit is suitable for various indoor environments.

Arahan Operasi

Paparan Lebihview

The main display unit features a clear screen that shows both indoor and outdoor temperatures. The top reading typically represents the outdoor temperature (from the wireless sensor), and the bottom reading represents the indoor temperature (from the main unit's internal sensor).

Figure 4: The main display unit shows both indoor and outdoor temperatures clearly.

Pemilihan Unit Suhu (°F/°C)

To switch between Fahrenheit (°F) and Celsius (°C), locate the "°F/°C" button on the back of the main display unit and press it. The display will update to the selected unit.

Figure 5: Press the °F/°C button to toggle between temperature units.

Max/Min Records and Trend Indicator

The unit records and stores maximum and minimum temperature values within a 24-hour period. Trend indicators on the display help monitor temperature changes in the environment.

Figure 6: Max/Min temperature records and trend indicators for indoor and outdoor temperatures.

Multiple Sensor Support (Channels)

The OBET thermometer can connect to up to three wireless sensors (additional sensors sold separately), allowing you to monitor temperatures in different locations simultaneously. Use the "CH" button on the back of the main display unit to cycle through the channels.

Figure 7: The system supports up to three channels for multi-location temperature monitoring.

Video Produk Rasmi

Penyelenggaraan

Pembersihan

To clean the thermometer units, simply wipe them with a clean, damp kain. Jangan gunakan pembersih yang kasar atau rendam unit di dalam air.

Penggantian Bateri

When the battery indicator appears on the display, replace the batteries in the respective unit (main display or sensor) to ensure continuous and accurate readings.

Menyelesaikan masalah

• No Reading/Dashes on Display:
  • Ensure batteries are correctly installed in both units with proper polarity.
  • Check if batteries are depleted and replace them if necessary.
  • Verify that the wireless sensor is within the 500ft transmission range of the main display unit.
  • Allow up to 30 seconds for initial pairing or after battery replacement.
• Bacaan Tidak Tepat:
  • Ensure the wireless sensor is not in direct sunlight or exposed to extreme weather conditions, which can affect accuracy.
  • Avoid placing units near heat sources (e.g., appliances, vents) or cold sources (e.g., refrigerators, freezers).
  • Ensure proper ventilation around both units.
• Kehilangan Isyarat:
  • Relocate the wireless sensor closer to the main display unit.
  • Minimize obstructions (thick walls, large metal objects) between the sensor and the display unit.
  • Minimize obstructions (thick walls, large metal objects) between the sensor and the display unit.
  • Check for strong electromagnetic interference from other electronic devices.

Spesifikasi

Waranti & Sokongan

For any technical support or warranty inquiries, please contact OBET customer service. You can also refer to the official user manual PDF for more detailed information.

• E-mel Sokongan Teknikal: obet_us@hotmail.com
• Manual Pengguna (PDF): Muat turun PDF