OBET Wireless Temperature Sensor Instruction Manual

1. Pengenalan

Thank you for choosing the OBET Wireless Temperature Sensor. This sensor is designed to expand the monitoring capabilities of your compatible OBET indoor/outdoor thermometer (models B61, B62, B63, B66), allowing you to measure temperature and humidity in additional locations. With its robust wireless transmission and accurate readings, you can effectively monitor environmental conditions in various areas of your home or patio.

2. Maklumat Keselamatan

• Do not expose the sensor to direct sunlight or heavy rain. Place it under a porch or eaves for optimal performance and longevity.
• Do not immerse the sensor in water or any other liquids.
• Keep the device away from extreme temperatures, open flames, and strong magnetic fields.
• Use only the specified battery type (2 AA batteries). Ensure correct polarity during installation.
• Jauhkan bateri daripada kanak-kanak. Jika tertelan, dapatkan rawatan perubatan segera.
• Dispose of used batteries and the device according to local regulations.

3. Persediaan

3.1. Pemasangan Bateri

The OBET Wireless Temperature Sensor requires two (2) AA batteries (not included). Follow these steps to install the batteries:

1. Cari penutup petak bateri di bahagian belakang sensor.
2. Luncurkan penutup ke bawah untuk membuka petak.
3. Insert two AA batteries, ensuring the correct positive (+) and negative (-) polarity as indicated inside the compartment.
4. Tutup penutup petak bateri dengan selamat.

Figure 1: Battery Compartment on the back of the sensor.

3.2. Peletakan Sensor

For optimal performance and accurate readings, place the wireless sensor in a location that is protected from direct sunlight and heavy rain. Ideal locations include:

• Under a porch or overhang.
• Beneath eaves.
• In a shaded, well-ventilated area.

Avoid placing the sensor near heat sources (e.g., air conditioning units, vents, direct sunlight) or in areas with high humidity that could affect its accuracy or damage the unit.

Figure 2: Recommended outdoor placement for the sensor.

3.3. Pairing with Base Station

The sensor is designed to automatically pair with compatible OBET base stations (B61, B62, B63, B66). Ensure your base station is powered on and within range. The sensor will transmit its readings to the base station once a connection is established. The base station can support up to three remote wireless sensors for multi-location monitoring.

Figure 3: OBET Wireless Temperature Sensor.

4. Arahan Operasi

Once the sensor is set up and paired with your OBET base station, it will continuously transmit temperature and humidity data. The base station will display these readings along with its own indoor measurements, forecast, and barometric pressure.

4.1. Temperature and Humidity Readings

The sensor provides accurate temperature and humidity readings within the specified ranges:

• Julat Suhu Dalaman: 14.2 ℉ hingga 122 ℉ (-9 ℃ hingga 50 ℃)
• Julat Suhu Luaran: -40℉ hingga 158℉ (-40℃ hingga 70℃)

4.2. Jarak Penghantaran

The sensor can transmit data to the base station up to 500 feet (150 meters) in open areas. Obstacles such as walls, large metal objects, or other electronic devices may reduce the effective transmission range.

4.3. Multi-Location Monitoring

Your compatible OBET base station can connect with up to three remote wireless sensors, allowing you to monitor conditions in different areas simultaneously. Each sensor's data will be displayed in a dedicated section on the base station's screen.

5. Penyelenggaraan

• Pembersihan: Lap sensor dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Penggantian Bateri: Replace batteries when the low battery indicator appears on your base station for the corresponding sensor. Ensure to use fresh AA batteries.
• Storan: If storing the sensor for an extended period, remove the batteries to prevent leakage and corrosion.

6. Penyelesaian masalah

7. Spesifikasi

8. Waranti dan Sokongan

OBET products are manufactured with high-quality standards. For specific warranty information and terms, please refer to the warranty card included with your original OBET thermometer base station or visit the official OBET website. If you encounter any issues or require technical assistance, please contact OBET customer support through the contact information provided on the product packaging or the official webtapak.

Untuk maklumat lanjut, lawati OBET Store on Amazon.