Hurricane Classic 6-Inch Clip-On Table Fan Instruction Manual

pengenalan

Thank you for choosing the Hurricane Classic 6-Inch Clip-On Table Fan. This portable corded electric fan is designed to provide personal cooling with its two quiet speeds and adjustable tilt feature. It is suitable for various environments such as desks, shelves, homes, offices, or dorms. Please read this manual carefully before use to ensure proper operation and maintenance.

Maklumat Keselamatan Penting

Please read and save these safety instructions. Failure to follow these instructions may result in electric shock, fire, or injury.

• Sentiasa cabut plag kipas sebelum membersihkan atau melakukan sebarang penyelenggaraan.
• Do not use the fan near water or in excessively humid environments.
• Keep fingers and other objects away from the fan blades when the fan is operating.
• Ensure the power cord is not damaged or pinched. Do not operate the fan with a damaged cord or plug.
• Do not place the fan on unstable surfaces.
• Kipas ini untuk kegunaan dalaman sahaja.
• Do not attempt to repair or modify the fan yourself. Contact qualified service personnel for repairs.

Arahan Persediaan

Your Hurricane Classic Clip-On Fan is designed for easy setup and versatile placement.

Memasang Kipas

The fan features a robust clip-on mechanism for secure attachment to various surfaces.

1. Identify a stable surface, such as a desk, shelf, or table edge, that is up to 2 inches thick.
2. Open the fan's clip by pressing the handles together.
3. Position the fan on the desired surface and release the handles to secure the clip firmly. Ensure the fan is stable and does not wobble.

Image: The Hurricane 6-inch clip-on fan attached to a desk, demonstrating its mounting capability.

Imej: A terperinci view of the fan's clip, illustrating its ability to attach to surfaces up to 2 inches thick.

Melaraskan Kecondongan

The fan head can be tilted to direct airflow precisely where needed.

1. Gently hold the fan head and adjust it to the desired upward or downward angle.
2. The fan is designed to hold its position once adjusted.

Image: The fan head tilted at various angles, demonstrating its adjustable tilt feature.

Arahan Operasi

Menghidupkan dan Kawalan Kelajuan

The fan features a 2-speed control switch located on the fan housing.

1. Palamkan kipas ke soket elektrik standard.
2. Locate the switch on the back of the fan.
3. Slide the switch to position "1" for low speed or "2" for high speed.
4. To turn off the fan, slide the switch to the "0" position.

Image: A close-up of the fan's rear, showing the 2-speed control switch labeled '1' and '2'.

Penyelenggaraan

Pembersihan berkala akan membantu mengekalkan prestasi kipas anda dan memanjangkan jangka hayatnya.

• Pembersihan: Cabut plag kipas sebelum membersihkan. Gunakan yang lembut, damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners or allow water to drip into the motor housing.
• Storan: When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging.
• Tiada Pelinciran Diperlukan: The fan motor is permanently lubricated and requires no additional oiling.

Menyelesaikan masalah

This section addresses common issues you might encounter with your Hurricane Classic Clip-On Fan.

Fan Does Not Turn On (No Power)

If your fan has no power after 3 years of use, or at any time, check the fuse located in the plug.

• Periksa Alur Kuasa: Ensure the outlet is functioning by plugging in another appliance.
• Periksa Fius: Many fans include a fuse within the plug. Carefully open the fuse compartment (refer to the plug's specific design) and check if the fuse is blown. Replace with a fuse of the same rating if necessary.
• Periksa Kord Kuasa: Look for any visible damage to the cord or plug. If damaged, discontinue use and contact customer support.

Oscillation Function Not Working Correctly

If the oscillation only works when actively pulling down on the oscillation cord, it indicates the mechanism may not be fully engaged.

• Engaging Oscillation: Pull the oscillation cord firmly downwards until you hear a distinct "click." This ensures the oscillation mechanism is fully engaged. If it does not click, try pulling slightly harder.
• Disengaging Oscillation: Pull the oscillation cord again to disengage the function.

Tilt Function Not Holding Position

If the fan head springs back up after being tilted, the internal gear system may need to be reset.

• Repeated Adjustment: Gently pull the fan head down to the desired tilt position. If it springs back, repeat the action several times. The internal gears should eventually engage and hold the position as intended.

Spesifikasi

Waranti dan Sokongan

For warranty information or technical support, please refer to the product packaging or contact Hurricane customer service. Keep your purchase receipt as proof of purchase.