BALDR G-250
Manual Pengguna Termometer Kolam Terapung Solar BALDR G-250
Model: G-250
pengenalan
The BALDR G-250 Solar Floating Pool Thermometer is designed to provide accurate and easy-to-read temperature measurements for various water bodies such as swimming pools, hot tubs, cold plunges, and aquariums. This device features solar power for continuous operation and a clear digital display, offering convenience and reliability for monitoring water temperature.
Arahan Persediaan
- Kuasa Permulaan: The thermometer is solar-powered. Upon first use, ensure the solar panel is exposed to direct sunlight for a few hours to activate the internal battery. No manual battery installation is required.
- Pemilihan Unit Suhu: The device typically defaults to Fahrenheit or Celsius. Refer to the small button on the underside or side of the unit (if present) to switch between °C and °F. Press and hold the button for a few seconds to toggle the unit.
- penempatan: Gently place the thermometer into the water body you wish to monitor. The device is designed to float.
- Using the Tether: A nylon tether is included. Attach it to the designated loop on the thermometer and secure the other end to a fixed point (e.g., pool ladder, edge) to prevent the thermometer from drifting too far.
Image: The BALDR G-250 Solar Floating Pool Thermometer, showing its green top, solar panel, and digital display.
Image: The thermometer floating in a pool, illustrating how the solar panel charges the device under sunlight.
Image: The BALDR G-250 thermometer with its included tether, demonstrating how it can be secured in the water.
Arahan Operasi
- Paparan Automatik: The thermometer automatically displays the water temperature on its digital LCD screen once placed in water and sufficiently charged.
- Suhu bacaan: The large, one-sided LCD screen is designed for easy readability, even from a distance or at an angle.
- Temperature Updates: The device provides a temperature reading within 10 seconds of initial submersion and updates approximately every 60 seconds thereafter.
- Ketepatan: The thermometer offers an accuracy of ±1.8°F (±1°C) within a range of -4°F to 122°F (-20°C to 50°C).
- Penggunaan Serbaguna: Suitable for swimming pools, hot tubs, cold plunges, aquariums, and ponds.
Image: The BALDR G-250 thermometer floating in water, highlighting its large, clear digital display for easy temperature reading.
Image: A collage showing the BALDR G-250 thermometer in different settings, including a swimming pool, hot spring, aquarium, and hot tub, demonstrating its versatility.
Penyelenggaraan
- Pembersihan: Wipe the thermometer clean with a soft, damp cloth as needed. Avoid abrasive cleaners or solvents.
- Integriti Kalis Air: The device features an IPX8 waterproof rating and is ultrasonically welded to prevent leakage, rust, and dirt buildup. Do not attempt to open the unit, as this may compromise its waterproof seal.
- Fogging Prevention: Built-in desiccant material helps prevent screen fogging. If fogging occurs, ensure the unit is exposed to sunlight to allow the desiccant to reactivate.
- Ketahanan Bahan: Constructed from ABS+TPU food-grade material, the thermometer is shatterproof and UV-resistant, designed for long-term use in various water conditions.
Image: An illustration detailing the IPX8 waterproof rating of the BALDR G-250 thermometer, showing its resistance to water ingress compared to lower ratings.
Image: A diagram illustrating the unique sealing design of the BALDR G-250 thermometer, emphasizing its anti-leakage properties.
Menyelesaikan masalah
- Tiada Paparan atau Paparan Samar:
- Ensure the solar panel has received sufficient sunlight to charge the internal battery. Place the thermometer in direct sunlight for several hours.
- Bacaan Suhu Tidak Tepat:
- Verify that the temperature probe (the lower part of the thermometer) is fully submerged in the water and not resting on the surface or against the pool wall. Allow sufficient time (at least 10 seconds) for the reading to stabilize.
- Screen Fogging:
- The thermometer has a built-in desiccant to prevent fogging. If fogging occurs, ensure the unit is exposed to sunlight, which helps reactivate the desiccant and clear the display. If persistent, contact customer support.
- Water Inside the Unit:
- The device is designed with IPX8 waterproofing. If water ingress is observed, the seal may be compromised. Do not attempt to repair it yourself. Contact customer support for assistance.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | BALDR |
| Nama Model | G-250 |
| Julat Suhu | -4°F hingga 122°F (-20°C hingga 50°C) |
| Ketepatan Suhu | ± 1.8 ° F (± 1 ° C) |
| Sumber Kuasa | Berkuasa Suria |
| Tahap Kalis Air | IPX8 |
| Jenis Paparan | LCD Digital |
| Masa Tindak Balas | 10 seconds (initial), updates every 60 seconds |
| Komponen yang Disertakan | 1* Solar digital pool thermometer, 1* nylon tether |
| Bahan Luar | ABS+TPU (Food-grade, Shatterproof, UV-Resistant) |
| Berat Barang | 9.9 auns |
| Panjang Item | 7.5 Inci |
Image: A diagram showing the dimensions of the BALDR G-250 thermometer, indicating its length and width.
Waranti dan Sokongan
BALDR is committed to customer satisfaction. If you encounter any issues with your G-250 Solar Floating Pool Thermometer, please refer to the contact information below for support.
Maklumat Hubungan:
- Bebas Tol AS: +1 833-381-5659 (Isnin-Jumaat: 09:30 PG-5:30 PTG PST)
- DE Bebas Tol: +49 800-182-0576 (Mon-Fri: 09:00 AM-5:00 PM CET)
- UK Toll-Free: +44 800-808-5337 (Mon-Fri: 09:00 AM-5:00 PM CET)
- e-mel: proservicequick@hotmail.com
For additional support or inquiries, please visit the official BALDR website or contact the provided support channels. Your satisfaction is guaranteed.
Image: The product packaging displaying various contact details for customer support in different regions.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.