Generic Remote Control User Manual

1. Pengenalan

This document provides essential instructions for the proper setup, operation, and maintenance of your new Generic replacement remote control. This remote is designed to be compatible with specific projector models, including the Rayfoto RD-881 and Topvision JQ818B 5G Mini DLP Portable 1080P WiFi Movie Projectors. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

Important: This remote control is an infrared (IR) replacement. Ensure that the buttons on this remote match those of your original remote for full compatibility. Some functions may vary if the original remote had different button layouts or features.

Imej 1.1: Depan view of the remote control, showing all buttons and layout.

2. Persediaan

2.1 Pemasangan Bateri

Alat kawalan jauh memerlukan one (1) AAA battery for operation. Batteries are not included with the remote control and must be purchased separately.

1. Cari petak bateri di belakang alat kawalan jauh.
2. Luncurkan penutup petak bateri ke bawah atau tekan selak dan angkat untuk membuka.
3. Masukkan satu bateri AAA, pastikan terminal positif (+) dan negatif (-) sejajar dengan betul dengan tanda di dalam petak.
4. Gantikan penutup petak bateri dengan menggelongsorkannya semula ke tempatnya sehingga ia berbunyi dengan selamat.

Image 2.1: Back of the remote control with the battery cover open, illustrating battery placement.

2.2 Semakan Keserasian

Before attempting to use the remote, verify its compatibility with your projector. This remote is specifically designed for Rayfoto RD-881 and Topvision JQ818B projectors. If your projector model is not listed, or if the button layout on this remote differs significantly from your original remote, full functionality may not be guaranteed.

3. Arahan Operasi

Point the remote control directly at the IR receiver on your projector. Ensure there are no obstructions between the remote and the projector. The effective range typically extends several meters.

3.1 Fungsi Butang

• Butang kuasa (⏻): Menghidupkan atau mematikan projektor.
• Input Source Button (⌘): Cycles through available input sources (e.g., HDMI, USB, AV).
• Pad Navigasi (Atas, Bawah, Kiri, Kanan): Digunakan untuk menavigasi menu dan memilih pilihan.
• OK/Play/Pause Button (⏵): Confirms selections, plays, or pauses media.
• Butang Menu (☰): Opens the projector's main menu.
• Butang rumah (⌂): Returns to the main home screen or interface.
• Butang Kembali/Kembali (↶): Kembali ke skrin atau menu sebelumnya.
• Volume Up/Down Buttons (🔊 / 🔉): Melaraskan kelantangan audio.
• Butang Redam (🔇): Membisukan atau menyahredamkan audio.
• Previous/Next Track Buttons (⏮ / ⏭): Skips to the previous or next media track.

4. Penyelenggaraan

4.1 Pembersihan

Untuk membersihkan alat kawalan jauh, gunakan kain lembut dan kering. Untuk kotoran degil, gunakan sedikit kainampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the remote's surface or internal components.

4.2 Penggantian Bateri

Replace the AAA battery when the remote control's response becomes sluggish or stops working. Always replace with a new, high-quality AAA battery. Do not mix old and new batteries, or different types of batteries, as this can lead to leakage or damage.

Warning: Remove batteries if the remote control will not be used for an extended period to prevent potential leakage and damage.

5. Penyelesaian masalah

• Jauh tidak bertindak balas:
  • Periksa sama ada bateri dimasukkan dengan betul dengan kekutuban yang betul.
  • Gantikan bateri dengan yang baru.
  • Pastikan tiada halangan antara alat kawalan jauh dan penerima IR projektor.
  • Make sure you are within the effective operating range of the projector.
• Some functions do not work:
  • Verify that your projector model (Rayfoto RD-881 or Topvision JQ818B) is explicitly supported by this replacement remote.
  • Confirm that the buttons on this remote match the functions of your original remote. Replacement remotes may not replicate all specialized functions of an original remote if the button layout differs.
• Still experiencing issues:

  If your projector model number is not listed as compatible, or if you continue to experience problems after following these troubleshooting steps, please contact the seller for further assistance.

6. Spesifikasi

7. Waranti dan Sokongan

Warranty information for this Generic replacement remote control is not explicitly provided. For any questions regarding warranty, returns, or technical support, please contact the seller directly through your purchase platform. The seller is the primary point of contact for all product-related inquiries.

Please retain your purchase receipt or order details as proof of purchase when contacting support.