pengenalan
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Maklumat Keselamatan
Sentiasa patuhi langkah berjaga-jaga keselamatan asas semasa memasang atau menggunakan produk elektrik untuk mengurangkan risiko kebakaran, kejutan elektrik dan kecederaan diri.
- Matikan: Always switch off the power supply at the main circuit breaker before installing or replacing the lamp.
- Penggunaan Dalaman Sahaja: l iniamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Pangkalan yang Betul: Pastikan lamp holder is compatible with an E27 base.
- Voltage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampkeperluan.
- Tidak Boleh Dimalapkan: l iniamp is not dimmable. Do not use it with dimmer switches.
- Keselesaan Mata: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Kandungan Pakej
Pakej mengandungi:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Arahan Pemasangan
- Matikan Kuasa: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Keluarkan L Lamaamp: Carefully unscrew and remove the existing lamp from the E27 lamp pemegang.
- Pasang L Baharuamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Kedudukan: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Pulihkan Kuasa: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Arahan Operasi
This Philips LED lamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Hidup/Mati Automatik: Lamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Sensor Siang: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Penderia Gerakan: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Kualiti Cahaya: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Penyelenggaraan
The Philips LED Lamp with Sensor requires minimal maintenance.
- Pembersihan: Pastikan kuasa dimatikan sebelum membersihkan. Lap lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Kawasan Sensor: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Lamp tidak menyala. |
|
|
| Lamp tidak padam. |
|
|
| Sensor sensitivity seems low. |
|
|
Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Philips |
| Nombor Model | 929002058731 |
| Jenis Cahaya | LED |
| Wattage | 8 Watt |
| Setara Pijar | 60 Watt |
| Lamp Pangkalan | E27 |
| Warna Cerah | Putih Hangat |
| Suhu Warna | 2700 Kelvin |
| Fluks Bercahaya | 806 Lumen |
| Voltage | 100-240 Volt |
| Kekerapan | 50 Hertz |
| Ciri Khas | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Penggunaan Dalaman/Luar | Dalaman |
| Jangka hayat | 15,000 Jam |
| Dimensi (H x W) | 12.2 cm x 6.25 cm |
| bahan | plastik |
Waranti dan Sokongan
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Sokongan dalam talian: melawat www.philips.com/support untuk Soalan Lazim dan pilihan hubungan.
