ACEGMET X20-60m Green Beam Laser Measure User Manual

1. Pengenalan

The ACEGMET X20-60m is a portable and user-friendly green beam laser measuring device designed for high-precision distance measurements. It features a bright green laser for enhanced visibility, an electronic angle sensor for advanced measurements, and multiple calculation modes including area, volume, and Pythagorean functions. This manual provides essential information for the safe and effective operation of your device.

Image: The ACEGMET X20-60m Green Beam Laser Measure device.

2. Maklumat Keselamatan

This device uses a Class 2 laser. Observe the following safety precautions:

• Jangan merenung terus ke pancaran laser.
• Jangan halakan pancaran laser kepada orang atau haiwan.
• Elakkan terkena mata secara langsung.
• Do not disassemble the device; repairs should only be performed by authorized personnel.
• Jauhkan peranti daripada capaian kanak-kanak.
• Gunakan peranti hanya untuk tujuan yang dimaksudkan seperti yang diterangkan dalam manual ini.

Kelas Laser: Kelas 2
Jenis Laser: 490-560nm, <1mW

3. Kandungan Pakej

Sahkan bahawa semua item terdapat dalam pakej:

• 1x ACEGMET Laser Measure Device
• 3x 1.5V Rechargeable Batteries
• 1x Tali Tangan
• Beg Penyimpanan 1x

Image: The ACEGMET X20-60m laser measure, rechargeable batteries, hand strap, and storage bag.

4. Persediaan

4.1 Pemasangan Bateri

1. Cari petak bateri pada peranti.
2. Buka penutup petak bateri.
3. Insert the three 1.5V rechargeable batteries, ensuring correct polarity (+/-).
4. Tutup penutup petak bateri dengan selamat.

4.2 Mengecas Peranti

The device is equipped with rechargeable batteries and supports USB charging.

1. Sambungkan kabel USB yang disediakan ke port pengecasan pada peranti.
2. Sambungkan hujung kabel USB yang satu lagi ke penyesuai kuasa USB yang serasi (tidak disertakan) atau port USB komputer.
3. The device's display will indicate charging status.
4. Setelah dicas sepenuhnya, cabut kabel USB.

Image: The laser measure connected for USB charging, highlighting its waterproof design.

5. Arahan Operasi

5.1 Hidupkan/Mati Kuasa

• Untuk menghidupkan: Tekan butang MEAS butang.
• Untuk mematikan kuasa: Tekan dan tahan butang KOSONG/MATI button. The device will automatically shut down after 180 seconds of inactivity to save power.

5.2 Penukaran Unit

Tekan ke UNIT button to cycle through measurement units: Meters (M), Inches (In), Feet (Ft), and Feet+Inches (Ft+In).

5.3 Reference Point Switching

The device can measure from its front or rear edge. Press the reference point button (often indicated by an icon with an arrow pointing from the front or back of the device) to switch between reference points as needed for different measurement scenarios.

5.4 Mod Pengukuran

Tekan ke Fungsi button (often indicated by a square icon or 'M' for Mode) to cycle through the available measurement modes.

Image: Visual representation of the eight measurement modes and four unit modes available on the device.

1. Pengukuran Jarak Tunggal:

   Point the laser at the target and press MEAS. The distance will be displayed instantly.
2. Pengukuran Berterusan (Penjejakan):

   Activate this mode, then move the device. The display will continuously update with the current distance, showing maximum and minimum values.

3. Pengukuran Kawasan:

   Select area mode. Measure the length, then measure the width. The device will automatically calculate and display the area.

4. Pengukuran Isipadu:

   Select volume mode. Measure length, width, and height. The device will automatically calculate and display the volume.
5. Pythagorean Measurement (2-point, 3-point):

   Used for indirect height or distance measurements. Follow the on-screen prompts to measure the required sides of a right-angled triangle. The device will calculate the unknown side.

6. Electronic Angle Sensor / Auto Level / Auto Height Measurement:

   The integrated angle sensor allows for electronic level measurements, auto-level, and auto-height functions. For example, measure the distance between two points in the horizontal direction or determine the height of a window from the ground with a single measurement.

   

   Image: Demonstrating the angle sensor measurement feature to calculate the height of a window.

5.5 Data Storage and Retrieval

The device can store up to 20 sets of measurement data. Use the appropriate buttons (refer to device interface) to save and retrieve historical data.

Image: The device display showing multiple stored measurement data records.

5.6 Penambahan dan Penolakan

The device supports addition and subtraction of measurement values. Enter the first value, select the addition/subtraction function, then enter the second value. The result will be displayed.

5.7 Fungsi Redam

For use in quiet environments, activate the mute function to disable audible feedback.

5.8 Backlit LCD Display

The 2-inch backlit LCD display provides clear visibility in low light conditions.

6. Penyelenggaraan

6.1 Pembersihan

• Lap peranti dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang melelas.
• Ensure the laser lens and display are clean for accurate readings.

6.2 Penyimpanan

• Simpan peranti di dalam beg simpanannya apabila tidak digunakan.
• Simpan peranti di tempat yang sejuk dan kering, jauh dari cahaya matahari langsung dan suhu yang melampau.

6.3 Penentukuran Kendiri

The device supports self-calibration to maintain measurement accuracy. Refer to the on-screen menu or specific button combinations for initiating the self-calibration process.

7. Penyelesaian masalah

• Peranti tidak dihidupkan: Check battery charge level. Ensure batteries are inserted correctly.
• Pengukuran tidak tepat: Ensure the laser lens is clean. Verify the correct reference point is selected. Perform self-calibration if necessary.
• Pancaran laser tidak kelihatan: The green beam is designed for better visibility, but in very bright conditions or over long distances, it may be less apparent. Ensure the target surface is suitable for reflection.
• Mesej ralat: Consult the device's display for specific error codes and refer to the full product manual (if available) for detailed explanations.

8. Spesifikasi

9. Waranti dan Sokongan

ACEGMET provides an 18-month worry-free warranty and lifetime technical support for this product. If you have any questions or require assistance, please contact ACEGMET customer service. Our technical and after-sales teams are available to assist you.