MARIE Automatic Door Closer User Manual

1. Pengenalan

This manual provides detailed instructions for the installation, operation, and maintenance of your MARIE Automatic Door Closer, Model 1102-S. Designed for residential and light-duty commercial applications, this hydraulic door closer ensures controlled and quiet door closure for doors weighing between 55 and 99 lbs (25-45 kg) and up to 32 inches (80 cm) wide. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Maklumat Keselamatan

• Pastikan semua komponen ada dan tidak rosak sebelum pemasangan.
• Do not attempt to disassemble the main closer body, as it contains pressurized hydraulic fluid.
• Adjustments to closing and latching speeds should be made carefully and incrementally. Over-tightening or completely unscrewing adjustment valves can cause oil leakage and damage the unit.
• Keep hands and fingers clear of moving parts during operation and adjustment.
• This product is designed for specific door weights and sizes. Using it on doors outside the recommended range may lead to improper function or damage.

3. Kandungan Pakej

Sahkan bahawa semua item berikut disertakan dalam pakej anda:

• 1 x MARIE Automatic Door Closer Body
• 1 x Main Arm Assembly
• 1 x Parallel Arm Bracket
• Memasang Skru dan Perkakasan
• Templat Pemasangan
• Manual Pengguna (dokumen ini)

Image: All components of the MARIE Automatic Door Closer, including the main body, arm, parallel arm bracket, and mounting screws.

4. Spesifikasi

Image: Detailed dimensions of the door closer and a table indicating applicable door widths and weights for various models, highlighting MD1102 (Size 2) for 55-99 lbs doors.

5. Persediaan dan Pemasangan

The MARIE Automatic Door Closer offers universal installation options for various door configurations. Always use the provided template for accurate drilling.

5.1 Kaedah Pemasangan

There are three primary installation methods:

1. Regular Arm Installation: Closer installs on the PULL/HINGE side of the door.
2. Top Jamb Installation: Closer installs on the frame on the PUSH/STOP side of the door.
3. Parallel Arm Installation: Closer installs on the PUSH/STOP side of the door, utilizing the parallel arm bracket. This method is often used when the door and frame are not on the same plane or for specific aesthetic requirements.

Image: Diagrams illustrating Regular Arm, Top Jamb, and Parallel Arm installation methods for the door closer.

5.2 Door Type Compatibility

This door closer is suitable for various door types, including metal doors, fire doors, wood doors, and glass doors with frames. For installations where the door and door frame are not on the same plane (within 5cm/1.97 inches), a parallel plate may be required. Contact support if you need this component.

Imej: Cthamples of compatible door types (metal, fire, wood, glass) and a note regarding the need for a parallel plate if the door and frame are not flush.

5.3 Video Pemasangan

For a visual guide, please refer to the official installation video. This video demonstrates the step-by-step process for a smooth installation.

6. Arahan Operasi dan Pelarasan

The MARIE Automatic Door Closer features adjustable closing and latching speeds to provide a soft, quiet, and controlled door closure.

6.1 Adjusting Closing and Latching Speed

The door closer has two adjustment valves (screws) located on the main body:

• Valve 1 (Closing Speed Adjustment): Controls the closing speed of the door from 15° to 180° (the main sweep). Turning clockwise decreases speed (cuts speed), turning anti-clockwise increases speed (speeds up).
• Valve 2 (Latching Speed Adjustment): Controls the latching speed of the door from 0° to 15° (the final closing phase). Turning clockwise decreases speed (cuts speed), turning anti-clockwise increases speed (speeds up).

Attention: These valves must not be screwed out of the door closer body, as this will cause oil leakage and render the unit unusable.

Imej: Jarak dekat view of Valve 1 (closing speed) and Valve 2 (latching speed) adjustment screws, with directional indicators for increasing/decreasing kelajuan.

Image: Diagram illustrating how Valve 1 controls the closing speed from 15-90 degrees and Valve 2 controls the latching speed from 0-15 degrees.

6.2 Power Adjustment of Arm Shoe

The power of the door closer can be effectively increased or decreased by adjusting the position of the arm shoe. Moving the arm shoe closer to the door closer body generally increases the closing power, while moving it further away decreases it. This allows for fine-tuning the force required to close the door.

Image: Diagram showing how adjusting the arm shoe position affects the closing power (EN3 for 40-65KG, EN2 for 25-45KG, EN1 for 15-25KG).

Image: Detailed diagram showing the regulating valve and how the arm shoe position can be adjusted to increase or decrease closing power.

6.3 Push/Pull Door Compatibility

The door closer is designed to work effectively with both push and pull doors, providing consistent closing performance regardless of the door's opening direction.

Image: Visual representation of the door closer installed on both a 'Pull' door and a 'Push' door, demonstrating its versatility.

6.4 Soft Close and Buffer Function

Proper adjustment of the closing and latching speeds enables a soft close, preventing the door from slamming shut. This buffer function enhances safety and reduces noise, making it suitable for environments where quiet operation is desired.

Image: Illustration depicting the soft close and buffer feature, showing how the door closer prevents fingers from being caught and ensures quiet closure.

7. Penyelenggaraan

The MARIE Automatic Door Closer is designed for durability and requires minimal maintenance. The stable hydraulic fluid ensures constant lubrication and reliable operation in various climates.

• Pemeriksaan Berkala: Periodically check all mounting screws to ensure they are tight.
• Pembersihan: Wipe the exterior of the door closer with a soft, damp cloth to remove dust and grime. Avoid using harsh chemicals.
• Pelinciran: The internal hydraulic system is self-lubricating and does not require external lubrication.
• Rintangan Alam Sekitar: The unit is designed to be weatherproof, heat-resistant, frost-resistant, and anti-rust, making it suitable for both indoor and outdoor use.

Image: Icons and text indicating the door closer's suitability for indoor and outdoor use, highlighting its weatherproof, heat resistance, frost resistance, and anti-rust properties.

8. Penyelesaian masalah

If you encounter issues with your door closer, refer to the following common problems and solutions:

9. Waranti

All MARIE hydraulic door closers are warranted for Lima (5) tahun from the date of purchase. This warranty covers defects in materials and workmanship under normal use. If you are not satisfied with the product, you may return or exchange it within 30 days of purchase. For any quality problems with the door closer, please contact us for assistance.

10. Sokongan

For further assistance, technical support, or warranty claims, please contact MARIE customer service. Refer to your purchase documentation or the MARIE brand store on Amazon for contact details.

Lawati MARIE Store on Amazon.