Schellenberg 70988

Schellenberg 70988 Basic Window Mosquito Screen 120 x 140 cm Instruction Manual

pengenalan

This manual provides detailed instructions for the assembly, installation, and maintenance of your Schellenberg Basic Window Mosquito Screen, model 70988. This kit is designed to protect your home from insects while allowing fresh air circulation. It features a high-quality fiberglass fabric and a robust aluminum frame, suitable for various window types, including those with roller shutters.

Arahan Keselamatan

  • Always read and understand all instructions before beginning assembly or installation.
  • Use appropriate safety gear, such as gloves, when handling tools and materials.
  • Jauhkan komponen kecil daripada capaian kanak-kanak untuk mengelakkan bahaya tercekik.
  • Pastikan kawasan kerja bersih dan terang.
  • Do not modify the product in any way not described in this manual.

Kandungan Pakej

Sila sahkan bahawa semua komponen yang disenaraikan di bawah terdapat dalam pakej anda:

  • 4 x Aluminum profiles for the clampbingkai dalam
  • 1 x Fiberglass mosquito net fabric
  • 4 x Corner connectors
  • 4 x Corner connection caps
  • 4 x Stainless steel suspension springs
  • 2 x Piping handles
  • 4 x Piping beads
  • 1 x Brush seal
  • 1 x Arahan pemasangan
Diagram showing the components of the mosquito screen kit: aluminum profiles, corner connectors, mesh, handles, and piping.
Diagram showing the components of the mosquito screen kit: aluminum profiles, corner connectors, mesh, handles, and piping.

Persediaan dan Perhimpunan

Follow these steps to assemble and install your window mosquito screen:

  1. Prepare the Profiles: Connect the aluminum profiles using the corner connectors to form the frame. Ensure they are securely fitted.
  2. Install the Mesh: Lay the fiberglass mosquito net fabric over the assembled frame. Using the piping beads and a suitable tool (not included, typically a spline roller), press the fabric into the groove of the aluminum profiles. Trim any excess fabric.
  3. Attach Handles and Springs: Secure the two piping handles to the frame. Insert the stainless steel suspension springs into the designated slots on the frame.
  4. Apply Brush Seal: Integrate the brush seal into the frame. This seal helps to close any gaps between the mosquito screen and your window frame, providing enhanced protection against insects.
  5. Installation on Window: The assembled mosquito screen is designed to be hung onto the window frame using the integrated suspension springs. No drilling into your window frame is required. The slim profile (9 mm total installation depth) allows for installation even behind existing roller shutters.
A woman demonstrating the easy installation of the Schellenberg Basic Window Mosquito Screen by holding it up to a window.
A woman demonstrating the easy installation of the Schellenberg Basic Window Mosquito Screen by holding it up to a window.
Close-up of the aluminum profile with brush seal and fiberglass mesh, showing dimensions 8mm and 23mm.
Close-up of the aluminum profile with brush seal and fiberglass mesh, showing dimensions 8mm and 23mm.

Arahan Operasi

Once installed, the mosquito screen provides continuous insect protection. To open or close your window, simply unhook the screen from the window frame using the handles and set it aside. Re-attach it when the window is in the desired position. For seasonal use, the screen can be easily removed and stored.

Penyelenggaraan

  • Cleaning the Mesh: The fiberglass mesh can be cleaned with a soft brush or a damp cloth and mild soapy water. Rinse thoroughly with clean water and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
  • Membersihkan Bingkai: Lap bingkai aluminium dengan iklanamp kain.
  • Storan: For prolonged periods of non-use (e.g., winter), remove the screen from the window and store it in a dry, protected area to extend its lifespan.

Menyelesaikan masalah

Masalah Kemungkinan Punca Penyelesaian
Screen does not fit window opening. Incorrect measurements or assembly. Re-measure window opening and ensure profiles are cut to correct length during assembly. Check all corner connections.
Gaps between screen and window frame. Brush seal not properly installed or damaged. Ensure the brush seal is fully seated in its groove. Replace if damaged.
Mesh is loose or sagging. Piping bead not fully inserted or has come loose. Re-insert the piping bead firmly into the profile groove using a spline roller.

Spesifikasi

Ciri Perincian
Pengeluar Schellenberg
Nombor Model 70988
Dimensi Produk (L x W x H) 120 x 0.8 x 140 cm
Berat badan 1.38 kilogram
Saiz 120 x 140 cm
warna putih
Profile Ketebalan 23 x 8 mm
bahan Aluminum, Fiberglass
Penggunaan Luar
Bateri Diperlukan Tidak
Negara Asal China
Diagram illustrating the dimensions of the assembled mosquito screen: 120 cm width and 140 cm height.
Diagram illustrating the dimensions of the assembled mosquito screen: 120 cm width and 140 cm height.

Waranti dan Sokongan

For warranty information, product support, or to inquire about replacement parts, please refer to the official Schellenberg webtapak atau hubungi perkhidmatan pelanggan mereka secara langsung. Simpan bukti pembelian anda untuk sebarang tuntutan waranti.

Maklumat Hubungan:

  • Pengeluar: Schellenberg
  • Webtapak: www.schellenberg.de (Please check for local country-specific webtapak)

© 2023 Schellenberg. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.