FiiO K3 Type-C USB DAC Headphone Amp Manual Pengguna

1. Pengenalan

Terima kasih kerana membeliasing the FiiO K3 Type-C USB DAC Headphone Amp. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance and longevity. The FiiO K3 is a high-performance digital-to-analog converter and headphone amplifier designed to enhance your audio experience with various devices, including computers and other audio sources.

Figure 1: FiiO K3 Type-C USB DAC Headphone Amp

2. Persediaan

Follow these steps to set up your FiiO K3 for the first time.

2.1 Kandungan Pakej

Sebelum meneruskan, pastikan semua item terdapat dalam pakej:

• FiiO K3 Unit
• Kabel Data USB Jenis-C
• Anti-slip Tape (4 pieces)
• Panduan Mula Pantas
• Kad Waranti

Figure 2: FiiO K3 and included accessories

2.2 Menyambung ke Komputer

Connect the FiiO K3 to your computer using the provided USB Type-C cable. The K3 draws power directly from the USB port.

Figure 3: Front panel of FiiO K3 with headphone outputs and controls.

Figure 4: Rear panel of FiiO K3 with USB-C, Line Out, Coaxial Out, and Optical Out ports.

Mod Audio USB

The FiiO K3 supports two USB Audio modes, selectable via a switch on the rear panel:

• USB Audio 1.0 (Driver-Free): This mode is plug-and-play and does not require driver installation. It supports up to 96kHz/24-bit PCM audio. Compatible with Windows, macOS, and Linux.
• USB Audio 2.0 (Requires Driver): This mode offers higher performance, supporting up to 384kHz/32-bit PCM and DSD256. For Windows operating systems, a specific driver must be installed. For macOS and Linux, it is typically driver-free.

To download the Windows USB 2.0 driver, visit the official FiiO support webtapak: www.fiio.com/support.

2.3 Menyambung Fon Kepala

The FiiO K3 features two headphone output jacks on the front panel:

• Output Hujung Tunggal 3.5mm: Untuk fon kepala standard.
• Output Seimbang 2.5mm: For headphones with a balanced connection, offering improved sound separation and power.

Plug your headphones into the appropriate jack. Ensure the connection is secure.

2.4 Connecting to External Audio Devices

The FiiO K3 provides multiple output options for connecting to external speakers, amplifiers, or other DACs:

• 3.5mm Line Out: Connects to the analog input of an amplifier or active speakers. The volume of the Line Out is controlled by the K3's volume knob.
• Coaxial Out: Provides a digital coaxial output for connecting to an external DAC or amplifier with a coaxial input.
• Optik Keluar: Provides a digital optical output for connecting to an external DAC or amppengubah suai dengan input optik.

When using the Line Out, Coaxial Out, or Optical Out, ensure that the connected device is set to the correct input source.

3. Arahan Operasi

3.1 Kuasa Hidup/Mati dan Kawalan Kelantangan

The large knob on the front panel serves as both the power switch and volume control. Rotate it clockwise to power on the device and increase the volume. Rotate counter-clockwise to decrease the volume and power off the device when turned fully to the left.

3.2 Suis Keuntungan

The K3 features a gain switch (labeled "GAIN") on the front panel. This switch allows you to adjust the output level to match the impedance and sensitivity of your headphones:

• Keuntungan Rendah: Suitable for sensitive headphones or earphones.
• Keuntungan Tinggi: Provides more power for high-impedance or less sensitive headphones.

Adjust the gain setting to achieve a comfortable listening volume without distortion.

3.3 Bass Boost Switch

The bass boost switch (labeled "BASS") on the front panel allows you to enhance the low-frequency response of your audio. Toggle it on or off according to your preference.

Figure 5: Close-up of the FiiO K3 front panel showing volume knob, bass switch, and gain switch.

3.4 RGB Indicator

The RGB indicator light located near the volume knob displays the current sampling rate of the audio being played:

• Biru: 44.1kHz atau 48kHz sampkadar ling.
• Kuning: Sampling rate greater than 48kHz.
• hijau: DSD audio.
• merah: Tiada isyarat.

4. Penyelenggaraan

Proper maintenance ensures the longevity and optimal performance of your FiiO K3.

• Pembersihan: Gunakan kain lembut dan kering untuk mengelap peranti. Elakkan penggunaan bahan kimia yang keras atau bahan yang melelas.
• Pengendalian: Kendalikan peranti ini dengan berhati-hati. Elakkan daripada menjatuhkannya atau mendedahkannya kepada daya yang berlebihan.
• Persekitaran: Keep the device away from extreme temperatures, direct sunlight, moisture, and dust.
• Anti-slip Tape: Apply the provided anti-slip tape to the bottom of the unit to prevent it from sliding on surfaces.

5. Penyelesaian masalah

If you encounter issues with your FiiO K3, refer to the following common problems and solutions:

5.1 Tiada Keluaran Bunyi

• Semak Sambungan: Ensure all cables (USB, headphones, line out) are securely connected.
• Tahap Kelantangan: Verify that the volume knob on the K3 is turned up and not at its minimum setting. Also check the volume level on your computer or connected audio device.
• Input/Output Selection: Confirm that your computer's audio output is set to the FiiO K3. If using Line Out, ensure your external amplifier/speakers are set to the correct input.
• RGB Indicator: If the RGB indicator is red, there is no signal. Check your source device and connections.

5.2 Bunyi Herot

• Tetapan Keuntungan: If the sound is distorted, try switching the GAIN to "Low" for sensitive headphones.
• Tahap Kelantangan: Reduce the volume on both the K3 and your source device to prevent clipping.
• Kualiti Sumber: Pastikan sumber audio file is not corrupted or of low quality.
• Integriti Kabel: Check if the cables are damaged or faulty.

5.3 USB 2.0 Driver Issues (Windows)

• Pemasangan Pemandu: Ensure the correct FiiO USB 2.0 driver is installed from the official FiiO webtapak.
• Port USB: Cuba sambungkan ke port USB lain pada komputer anda.
• But semula: Mulakan semula komputer anda selepas pemasangan pemacu.

6. Spesifikasi

7. Waranti & Sokongan

The FiiO K3 comes with a standard manufacturer's warranty. Please refer to the included Warranty Card for specific terms and conditions. For technical support, driver downloads, firmware updates, and frequently asked questions, please visit the official FiiO webtapak:

FiiO Support Page

You may also contact FiiO customer service directly through their webtapak untuk bantuan lanjut.