1. Produk Lebihview
The Einhell TC-TC 800 Tile Cutter is designed for precise and efficient cutting of wall and floor tiles. This robust tool is suitable for various home renovation projects, offering clean cuts with minimal dust thanks to its water cooling system.
Ciri-ciri Utama:
- Robust Stainless Steel Table: Measuring 395 x 385 mm, it is easy to clean and features an angular scale up to 45° with non-slip feet for stable operation.
- Precise Cutting Guide: Ensures exact and straight cuts. The angle stop is adjustable from -45° to +45° for miter cuts.
- Integrated Water Reservoir: Provides necessary water cooling for the saw blade, protecting it from heat damage.
- Kapasiti Pemotongan: Maximum cutting height of 14 mm at 45° and 34 mm at 90°.
- Pengawal Keselamatan: A protective guard for the cutting disc ensures user safety from chips and dust.
2. Arahan Keselamatan
Sentiasa baca dan fahami semua amaran keselamatan, arahan, ilustrasi dan spesifikasi yang disediakan dengan alat kuasa ini. Kegagalan mematuhi semua arahan yang disenaraikan di bawah boleh mengakibatkan renjatan elektrik, kebakaran dan/atau kecederaan serius.
Amaran Keselamatan Am:
- Pakai peralatan pelindung diri (PPE) yang sesuai termasuk cermin mata keselamatan, perlindungan pendengaran dan sarung tangan.
- Pastikan kawasan kerja bersih, terang dan bebas daripada halangan.
- Jauhkan kanak-kanak dan orang ramai semasa mengendalikan alat.
- Never operate the tool if the power cord or plug is damaged.
- Sentiasa putuskan sambungan bekalan kuasa sebelum membuat sebarang pelarasan, menukar aksesori atau melakukan penyelenggaraan.
- Gunakan bilah yang betul untuk bahan yang dipotong.
- Ensure the water reservoir is adequately filled before operation to prevent overheating of the blade.
3. Komponen Selesaiview
Familiarize yourself with the main components of your Einhell TC-TC 800 Tile Cutter:
- Cutting Table (Stainless Steel)
- Diamond Cutting Disc (180 mm diameter)
- Unit Motor
- Takungan Air
- Cutting Guide with Scale
- Angle Stop (-45° to +45°)
- Pengawal Bilah
- Suis Hidup/Mati
- Membawa Pemegang
Gambar 1: Lebihview of the Einhell TC-TC 800 Tile Cutter with its main parts.
4. Persediaan
Before operating the tile cutter, ensure proper setup for safety and optimal performance.
4.1 Membongkar dan Pemeriksaan
- Keluarkan semua komponen dari pembungkusan dengan berhati-hati.
- Inspect the tool for any signs of damage during transit. Do not operate if damaged.
- Pastikan semua komponen yang disenaraikan ada.
4.2 Mengisi Takungan Air
The integrated water reservoir is essential for cooling the diamond cutting disc and reducing dust.
- Locate the water reservoir beneath the cutting table.
- Fill the reservoir with clean water to the indicated level. Ensure the water pump is submerged.
- Regularly check the water level during operation and refill as needed.
Figure 2: Filling the water reservoir for wet cutting.
4.3 Adjusting the Cutting Guide and Angle Stop
For accurate cuts, adjust the cutting guide and angle stop as required.
- The cutting guide with scale ensures straight cuts. Position it according to your desired measurement.
- For miter cuts, adjust the angle stop between -45° and +45°. Secure it firmly before cutting.
Figure 3: Adjustable angle stop for miter cuts.
5. Arahan Operasi
Follow these steps for safe and effective tile cutting.
5.1 Menghidupkan/Mematikan
- Connect the tile cutter to a suitable power outlet (240 Volts).
- To turn on, press the green 'ON' button.
- To turn off, press the red 'OFF' button.
Figure 4: Power switch for turning the machine on and off.
5.2 Membuat Potongan
- Place the tile firmly on the stainless steel cutting table, aligning it with the cutting guide or angle stop as desired.
- Ensure the water pump is active and water is flowing to the blade.
- Turn on the tile cutter.
- Slowly and steadily push the tile through the rotating diamond blade. Avoid excessive force.
- Once the cut is complete, turn off the tile cutter and wait for the blade to stop before removing the tile.
Figure 5: Demonstrating a tile being cut with the machine.
5.3 Official Product Video: How to Use
Video 1: This video demonstrates the basic operation and usage of a tile cutter, including setup and cutting techniques.
6. Penyelenggaraan
Regular maintenance ensures the longevity and performance of your tile cutter.
6.1 Cleaning the Water Reservoir
After each use, clean the water reservoir to prevent buildup of tile dust and debris.
- Putuskan sambungan bekalan kuasa.
- Remove the cutting table or access panel to reach the reservoir.
- Empty the dirty water and thoroughly clean the reservoir with fresh water.
- Pasang semula komponen.
6.2 Penggantian Bilah
Replace the diamond cutting disc when it becomes dull or damaged.
- Pastikan alat dicabut.
- Use the provided tool to loosen the blade retaining nut.
- Carefully remove the old blade and install the new 180 mm diamond cutting disc, ensuring it is correctly oriented.
- Tighten the retaining nut securely.
7. Penyelesaian masalah
This section addresses common issues you might encounter with your tile cutter.
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Poor cut quality (chipping, uneven edges) | Dull or incorrect blade; insufficient water cooling; pushing too fast. | Replace blade with a suitable diamond disc; ensure water reservoir is full and pump is working; reduce feeding speed. |
| Water overflow from table | Water channels blocked; reservoir too full; uneven surface. | Clean water channels; do not overfill reservoir; ensure the machine is on a level surface. |
| Mesin tidak bermula | No power supply; faulty switch; motor issue. | Check power connection and circuit breaker; test the power outlet; contact customer support if switch or motor is faulty. |
| Rusted screws/components | Lack of proper drying/maintenance after wet use. | Regularly clean and dry all metal components after use. Apply a rust preventative lubricant (e.g., WD-40) to screws and moving parts. |
8. Spesifikasi
| Ciri | Perincian |
|---|---|
| Jenama | Einhell |
| Nombor Model | 4301185 |
| kuasa | 800 Watt |
| Voltage | 240 Volt |
| Kelajuan | 2950 RPM |
| Diamond Cutting Disc Diameter | 180 mm |
| Ketinggian Pemotongan Maks. (90°) | 34 mm |
| Ketinggian Pemotongan Maks. (45°) | 14 mm |
| Angle of Cut | 45 Darjah |
| Dimensi Meja (L x W) | 39.6 cm x 38.5 cm |
| Dimensi Produk (L x W x H) | 39.6l. x 38.5an. x 25.5al. centimeters |
| Berat Produk | 9.1 Kilogram |
| Sumber Kuasa | Elektrik dengan kord |
| Ciri Khas | Adjustable angle stop, parallel stop with scale |
9. Waranti dan Sokongan
9.1 Maklumat Waranti
This Einhell product comes with a Waranti terhad 2 tahun. Sila simpan bukti pembelian anda untuk sebarang tuntutan waranti.
9.2 Sokongan Pelanggan
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Refer to the official Einhell webtapak atau pembungkusan produk anda untuk mendapatkan maklumat hubungan yang paling terkini.