Nova AMP-100

Nova AMP-100 2-Channel Mini AmpManual Pengguna yang lebih hidup

model: AMP-100

1. Pengenalan

Welcome to the user manual for the Nova AMP-100 2-Channel Mini Amppengalir. Padat ini amplifier is designed to enhance the audio experience in your car or motorcycle, providing 300 watts of power across two channels. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

2. Maklumat Keselamatan

Patuhi langkah keselamatan berikut untuk mencegah kecederaan atau kerosakan pada amppenghawa dingin dan komponen yang disambungkan:

  • Pemasangan Profesional Disyorkan: Installation of car audio equipment can be complex. If you are unsure about any part of the installation process, seek assistance from a qualified professional.
  • Sumber Kuasa: Sambungkan amplifier only to a 12-14.8 Volt DC power source with a negative ground.
  • Pendawaian: Ensure all wiring is correctly routed and secured to prevent pinching, cutting, or short circuits. Use appropriate gauge wiring for power and ground connections.
  • Pengudaraan: Lekapkan amplifier in a location that allows for adequate air circulation to prevent overheating. Do not cover the amplifier's heat sinks.
  • Kelembapan: Elakkan daripada mendedahkan amplifier to moisture or direct water contact.
  • Tahap Kelantangan: Pendedahan berpanjangan kepada tahap kelantangan yang tinggi boleh menyebabkan kerosakan pendengaran. Laraskan kelantangan pada tahap yang selamat dan selesa.

3. Kandungan Pakej

Sila sahkan bahawa pakej anda mengandungi item berikut:

  • Nova AMP-100 2-Channel Mini Amplebih hidup
  • Power/Speaker Wiring Harnesses (with wafer connectors)
  • Skru Pemasangan
Nova AMP-100 Mini Amppengalir dan aksesori yang disertakan

Image: Nova AMP-100 Mini Amplifier shown with its included wiring harnesses and mounting screws.

4. Ciri-ciri Produk

  • 2-Channel 300 Watts Amplebih hidup
  • Compact Dimensions: 3.94" L x 2.5" W x 1.6" H
  • Gold Plated RCA Connectors
  • Power On LED Indication
  • High/Flat/Low Pass Filter Built-In
  • Power & High Level Input & Speaker Output with wafer connectors
  • Stereo Separation: More Than 55dB
  • Respons Kekerapan: 20-20k Hz
  • High/Low Level Input Capability
  • 3-way Selectable Electronic Crossover Network
  • Stabil Stereo 4 Ohm
  • Kawalan Keuntungan Boleh Laras
  • Anti-Thump Turn On Circuitry
  • Remote Turn On/Off Functionality
  • Litar Perlindungan Kuasa
  • Vol Operasitage: 12-14.8 Volt DC

5. Persediaan dan Pemasangan

Pemasangan yang betul adalah penting untuk prestasi dan jangka hayat peranti anda amplifier. Follow these general guidelines:

5.1 Lokasi Pemasangan

  • Choose a dry, well-ventilated location away from direct heat sources or moisture.
  • Pastikan ruang yang mencukupi di sekeliling amppenguat untuk peredaran udara.
  • Pasang dengan selamat amplifier using the provided screws to prevent movement during vehicle operation.

5.2 Sambungan Pendawaian

Rujuk imej di bawah untuk lebih lanjutview daripada amplifier's connections. Always disconnect the vehicle's battery before making any electrical connections.

Nova AMP-100 Mini Amplifier showing power, speaker, and input terminals

Imej: Atas view of the Nova AMP-100 Mini Amplifier, highlighting the power input, speaker output, and RCA input sections.

  • Kuasa (B+): Connect the main power wire from the amplifier to the positive terminal of the vehicle's battery. An in-line fuse (not included) should be installed within 18 inches of the battery.
  • Tanah (GND): Connect the ground wire from the amppenyala pada permukaan logam yang bersih dan tidak dicat pada casis kenderaan. Pastikan sambungan yang kukuh dan berrintangan rendah.
  • Alat Kawalan Jauh (REM): Sambungkan wayar hidupkan jauh dari amplifier to the remote output of your head unit. This wire turns the amphidupkan dan matikan lampu isyarat dengan stereo anda.
  • Audio Input (RCA or High Level):
    • Input RCA: Use RCA cables to connect the amplifier's RCA inputs to the RCA outputs of your head unit.
    • Input Tahap Tinggi: If your head unit does not have RCA outputs, use the provided high-level input harness to connect directly to your head unit's speaker wires.
  • Output pembesar suara: Sambungkan pembesar suara anda ke amplifier's speaker output terminals using the provided wafer connectors. Ensure correct polarity (+ to + and - to -) for each speaker. The amplifier is 4 Ohm stereo stable.

6. Arahan Operasi

6.1 Perolehan Pelarasan

The gain control adjusts the input sensitivity of the amplifier to match the output level of your head unit. To set the gain:

  1. Pusingkan ampKawalan gandaan lifier kepada tetapan minimum (lawan arah jam sepenuhnya).
  2. Tetapkan kelantangan unit kepala anda kepada kira-kira 75% daripada tahap maksimumnya.
  3. Perlahan-lahan tingkatkan ampKawalan penguatan lifier sehingga anda mendengar herotan, kemudian undurkannya sedikit sehingga bunyinya jelas.

6.2 Tetapan Crossover

The amplifier features a 3-way selectable electronic crossover network with High/Flat/Low Pass filter options. This allows you to direct specific frequency ranges to your speakers.

  • LULUS TINGGI: Allows only frequencies above a certain point to pass through, typically used for tweeters or full-range speakers to prevent low bass distortion.
  • FLAT (FULL RANGE): Allows all frequencies to pass through, suitable for full-range speakers or if an external crossover is used.
  • PAS RENDAH: Allows only frequencies below a certain point to pass through, typically used for subwoofers.

Select the appropriate setting based on your speaker configuration and desired sound.

7. Penyelenggaraan

The Nova AMP-100 ampPemanas air memerlukan penyelenggaraan yang minimum. Ikuti garis panduan ini untuk memastikan ketahanannya:

  • Pembersihan: Lap secara berkala ampLap bahagian luar penapis dengan kain yang lembut dan kering. Jangan gunakan bahan kimia yang keras atau pembersih yang kasar.
  • Pengudaraan: Memastikan bahawa amplifier's cooling fins remain free of dust and debris to maintain proper heat dissipation.
  • Sambungan: Periksa semua sambungan pendawaian dari semasa ke semasa untuk memastikan ia kukuh dan bebas daripada kakisan.

8. Penyelesaian masalah

Jika anda mengalami masalah dengan anda amplifier, refer to the table below for common problems and solutions:

MasalahKemungkinan PuncaPenyelesaian
Tiada Kuasa / LED Kuasa MatiBlown fuse; Loose power/ground/remote wire; Incorrect wiring.Check in-line fuse; Verify all power, ground, and remote connections are secure and correct.
Tiada Keluaran BunyiLoose speaker wires; Incorrect input connection; Head unit issue; Gain set too low.Check speaker connections and polarity; Verify RCA or high-level input is connected correctly; Test head unit; Adjust gain.
Bunyi HerotGain set too high; Incorrect crossover setting; Speaker impedance mismatch.Reduce gain; Adjust crossover settings; Ensure speakers are 4 Ohm stable.
Engine Noise / WhiningPoor ground connection; RCA cables routed near power wires; Ground loop.Ensure solid ground connection; Reroute RCA cables away from power wires; Install a ground loop isolator if necessary.

9. Spesifikasi

CiriSpesifikasi
Nombor ModelAMP-100
Saluran2
Jumlah Kuasa Output300 Watt
Output (at 14.4V DC input)2Ch x 150 Watts
Dimensi (L x W x H)3.94" x 2.5" x 1.6" (10 x 6.35 x 4.06 cm)
Respons Kekerapan20-20k Hz
Pemisahan StereoLebih Daripada 55dB
Nisbah Isyarat Untuk KebisinganMore Than 90 Db
Peak Total Harmonic DistortionKurang daripada 0.1%
Vol Operasitage12-14.8 Volt DC
Berat Barang13 auns (0.37 kg)

10. Waranti dan Sokongan

Untuk maklumat jaminan atau sokongan teknikal, sila rujuk dokumentasi yang disediakan semasa pembelian atau hubungi peruncit anda. Simpan bukti pembelian anda untuk sebarang tuntutan jaminan.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.