pengenalan
Terima kasih kerana membeliasing the Lightahead Large Round LED Jellyfish Lamp. l iniamp is designed to create a serene and calming environment with its realistic jellyfish movement and vibrant color-changing LED lights. Please read this manual thoroughly before setup and operation to ensure proper use and longevity of your product.
Produk Selesaiview
The Lightahead Large Round LED Jellyfish Lamp terdiri daripada komponen berikut:
- Obor-obor Lamp Unit (Cylinder with base and lid)
- 2 x Synthetic Jellyfish
- Remote Control (Model No. WSH3032)
- Power Adapter (110V 60Hz)
Image: The Lightahead Large Round LED Jellyfish Lamp, tunjukkancasing the main unit, two synthetic jellyfish, and the included remote control. Various color options are displayed in smaller circles.
Arahan Persediaan
- penempatan: Letakkan lamp unit on a stable, flat surface where you intend for it to be used. Ensure it is away from direct sunlight or heat sources.
- Isi dengan Air: Carefully remove the lid from the lamp unit. Fill the tank with distilled water up to the fill line, or almost to the top. Penting: Gunakan hanya air suling untuk mengelakkan pengumpulan mineral dan memastikan prestasi optimum.
- Add Dish Soap: Add 3 drops of clear (non-creamy) liquid dishwashing soap to the water. This helps the jellyfish move smoothly and prevents air bubbles from clinging to them. Do not add more than 3 drops, as it may cause cloudiness.
- Hidupkan kuasa: Palamkan penyesuai kuasa ke dalam lamp unit and then into a standard electrical outlet. Turn the unit on using the power button on the base or the remote control. Allow the internal pump to circulate the water for a few minutes.
- Submerge Jellyfish: Gently submerge the synthetic jellyfish into the water, one at a time. Push them down to release any trapped air bubbles. If air bubbles remain, the jellyfish may float at the top. You can use a long, thin object (like a chopstick) to gently push them down and dislodge bubbles.
- Pergerakan Awal: The jellyfish should begin to move up and down gracefully. If a tentacle gets caught, gently free it with a long utensil.
Arahan Operasi
Your Lightahead Jellyfish Lamp can be operated using the buttons on the base or the included remote control.
Using the Remote Control (Model No. WSH3032)
Image: Detailed diagram of the remote control, showing buttons for power (ON/OFF), brightness adjustment, 16 static color options, and 4 dynamic color-changing modes (Flash, Strobe, Fade, Smooth).
- Hidupkan/Mati Kuasa: Tekan ke ON butang untuk memusingkan lamp pada, dan DIMATIKAN butang untuk mematikannya.
- Pelarasan Kecerahan: Use the brightness up/down buttons to adjust the intensity of the LED lights.
- Warna Statik: Select from 16 static color options by pressing the corresponding color button on the remote.
- Mod Dinamik:
- KILAT: Berubah-ubah warna dengan pantas.
- STROB: Flashes a single color at intervals.
- PUDAR: Peralihan antara warna dengan lancar.
- LICIN: Gradual color change with a soft transition.
Using the Base Buttons
- Butang HIDUP/MATI: Tekan untuk memutar lamp hidup atau mati.
- Butang PILIH: Press to cycle through the available color modes and effects.
Image: The jellyfish lamp tunjuk casing different single-color illumination options, demonstrating the vibrant LED capabilities.
Penyelenggaraan
Regular maintenance ensures the optimal performance and longevity of your jellyfish lamp.
- Penggantian Air: It is recommended to replace the distilled water every 3 months to maintain clarity and prevent potential issues.
- Adding Dish Soap: If the jellyfish movement becomes sluggish, add 2-3 additional drops of clear liquid dishwashing soap to the water. Do not exceed this amount to avoid cloudiness.
- Pembersihan: Cabut plag unit sebelum membersihkan. Lap bahagian luar dengan kain lembutamp kain. Jangan gunakan pembersih yang melelas atau rendam unit di dalam air.
- Gelembung Udara: Periodically check for air bubbles clinging to the jellyfish. Gently push them down to release any bubbles that may hinder their movement.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Jellyfish are floating at the top or not moving. | Air bubbles trapped on jellyfish; insufficient dish soap. | Gently push jellyfish down to release air bubbles. Add 2-3 more drops of clear liquid dish soap. |
| Water is cloudy. | Too much dish soap; tap water used. | Drain and refill with fresh distilled water and 3 drops of dish soap. Ensure only distilled water is used. |
| Lamp tidak dihidupkan. | Power adapter not connected; power outlet issue; unit malfunction. | Check power connections. Try a different outlet. If problem persists, contact customer support. |
| Motor bising. | Normal operation sound; potential debris in pump. | A slight hum is normal. If noise is excessive, ensure water is clean and jellyfish are not obstructing the pump intake. |
| Lamp sedang bocor. | Cabut palam unit dengan serta-merta. Empty the water and inspect for cracks or damage. Contact customer support for assistance. |
Spesifikasi
- Nama Model: REMOTE CONTROL MODEL NO. WSH3032
- Nombor Model Item: LACHIDAJFHX1
- Jenama: Lightahead
- Dimensi Produk: 5"D x 5"W x 14"H
- Berat Barang: 1.5 paun
- Bahan: plastik
- Jenis Sumber Cahaya: LED (18 LED)
- Ciri Khas: Bertukar Warna
- Sumber Kuasa: Elektrik Bertali
- Voltage: 110 Volt
- Kaedah Kawalan: Kawalan Jauh, Butang Tekan
- Penggunaan Dalaman/Luar: Dalaman
- Tahap Rintangan Air: Bukan Tahan Air
- UPC: 647409729493
Waranti dan Sokongan
This Lightahead Jellyfish Lamp datang dengan a Waranti 3 bulan dari tarikh pembelian. Waranti ini meliputi kecacatan pembuatan di bawah penggunaan biasa.
For technical support, warranty claims, or any questions regarding your product, please contact Lightahead customer service. Refer to your purchase documentation or the Lightahead official webtapak untuk maklumat hubungan.
Sila simpan bukti pembelian anda untuk tujuan waranti.