Pixel TW-283 N3 Wireless Shutter Remote Control Timer User Manual

1. Pengenalan

The Pixel TW-283 N3 is a versatile wireless shutter remote control and timer designed for compatible Canon EOS cameras. It offers advanced functionality for various photography scenarios, including single shooting, continuous shooting, Bulb mode, delay shooting, and comprehensive timer schedule shooting. This manual will guide you through the setup, operation, and maintenance of your device to ensure optimal performance.

2. Kandungan Pakej

• TW-283 Transmitter
• TW-283 Receiver
• Camera Connecting Cable (N3 type for Canon)
• Manual Pengguna

3. Produk Lebihview

Familiarize yourself with the components of the Pixel TW-283 N3 system:

Figure 1: Transmitter (left) and Receiver (right) with key functions labeled.

Pemancar (TX)

1. Penunjuk Cahaya LED
2. Suis Kuasa, Butang Lampu Latar
3. Butang Tambah Nombor
4. Butang Shift Kiri
5. Butang Tetapkan/Sahkan
6. Skrin LCD
7. Butang Mula/Berhenti Jadual Pemasa
8. Butang Kurangkan Nombor
9. Butang Shift Kanan
10. Butang Fokus/Butang Pengatup

Penerima (RX)

1. Penunjuk Cahaya LED
2. Suis Kuasa, Butang Lampu Latar
3. Skrin LCD
4. Butang Tambah Saluran/Cahaya Latar

4. Persediaan

4.1. Pemasangan Bateri

Both the transmitter and receiver require 2 AAA batteries each (not included). Ensure correct polarity when inserting batteries.

Figure 2: Correct battery insertion for Transmitter and Receiver.

4.2. Menyambung ke Kamera

The receiver connects to your camera via the provided N3 connecting cable. Attach the receiver to your camera's hot shoe and plug the cable into the camera's remote control port. The N3 cable is compatible with various Canon EOS models.

Figure 3: Interchangeable connecting cables, including N3 for Canon.

Figure 4: Wired connection setup for the remote control.

4.3. Pairing (Channel Setting)

To establish a wireless connection, ensure both the transmitter and receiver are powered on. The devices should automatically pair on the same channel (e.g., CH01). If pairing issues occur, manually set the channel on both units to match.

Figure 5: Wireless connection setup for the remote control.

5. Arahan Operasi

5.1. Mod Tangkapan Asas

The TW-283 supports several shooting modes:

• Penggambaran Tunggal: Press the shutter button halfway to focus, then fully press to capture a single image.
• 1S Continuous Shooting: Captures a series of images at 1-second intervals.
• Bulb Shooting: Allows for long exposures. Press the shutter button once to open the shutter, and again to close it.
• Delay Shooting: Set a delay time (1s to 59s) before the shutter is released.

Gambar 6: Lebihview of the four main shooting modes.

Figure 7: Half-press for focus, full-press for shutter.

5.2. Timer Schedule Shooting

This advanced mode allows you to program a sequence of shots with specific delays, exposure times, intervals, and repeat cycles. Ideal for time-lapse photography or complex long-exposure sequences.

• kelewatan: Set the initial delay before the first shot.
• Panjang: Set the exposure time for each shot (for Bulb mode).
• Intvl: Set the interval between shots.
• N1: Number of shots in the first group.
• Ulang: Set the interval for repeating the entire sequence.
• N2: Number of times to repeat the sequence.

Figure 8: Timer Schedule Shooting settings.

6. Penyelenggaraan

• Keep the device dry. Do not expose it to water or high humidity.
• Elakkan hentaman kuat atau menjatuhkan peranti.
• Clean with a soft, dry cloth. Do not use harsh chemicals.
• Tanggalkan bateri jika peranti tidak akan digunakan untuk tempoh yang lama.

7. Penyelesaian masalah

7.1. Peranti Tidak Dihidupkan

• Periksa sama ada bateri dimasukkan dengan betul dengan polariti yang betul.
• Gantikan dengan bateri AAA yang baru.

7.2. No Shutter Response

• Pastikan pemancar dan penerima dihidupkan.
• Sahkan bahawa pemancar dan penerima ditetapkan pada saluran yang sama.
• Check if the camera connecting cable is securely plugged into both the receiver and the camera's remote port.
• Confirm your camera is set to a compatible shooting mode (e.g., single shot, continuous, Bulb).
• Ensure the camera's remote control interface is correctly identified and used. For some Canon EOS models like 5D Mark IV or 6D Mark II, the interface might be next to the lens.

7.3. Image Blur During Long Exposure

• Ensure the camera is mounted on a stable tripod.
• Use the remote control to avoid camera shake from pressing the shutter button directly.

8. Spesifikasi

9. Compatible Cameras (N3 Cable)

The Pixel TW-283 N3 is compatible with a wide range of Canon EOS cameras, including but not limited to:

• EOS R3, EOS R5, EOS R5 C
• 5DS, 5DS R, 5D, 6D, 7D
• 1D X, 1D X Mark II, 1DX Mark III
• EOS 1D, 1D C, 1Ds, 1DS Mark II, 1DS Mark III
• 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II
• 5D Mark II, 5D Mark III, 5D Mark IV
• 7D Mark II, 6D Mark II
• 50D, 40D, 30D, 20D, 10D
• D60, D30, D2000
• EOS 1V, EOS-3
• R5 Markah II

Note: Not compatible with Canon EOS R6.

Always check your camera's remote control interface before ordering. If unsure about compatibility, contact customer service.

10. Waranti dan Sokongan

For warranty information or technical support, please refer to the official PIXEL webtapak atau hubungi peruncit anda. Simpan resit pembelian anda untuk tuntutan waranti.