Eurolite THA-250F LED Theater Spot

1. Pengenalan

This manual provides essential information for the safe and efficient operation of your Eurolite THA-250F LED Theater Spot. Please read this manual thoroughly before initial operation to ensure proper use and to prevent damage to the device or injury to yourself. Keep this manual for future reference.

The Eurolite THA-250F is a powerful 250W COB LED lighting fixture designed for indoor use, offering versatile dimming and focusing capabilities suitable for various theatrical and event lighting applications.

2. Arahan Keselamatan

AMARAN: Kegagalan mematuhi arahan keselamatan ini boleh mengakibatkan kebakaran, kejutan elektrik atau kecederaan atau kerosakan lain.

• Peranti ini direka untuk kegunaan dalaman sahaja. Do not expose it to rain or moisture.
• Pastikan bekalan kuasa voltage sepadan dengan penilaian pada peranti.
• Sentiasa sambungkan peranti ke salur keluar kuasa yang dibumikan.
• Jangan buka perumahnya. Tiada bahagian yang boleh diservis oleh pengguna di dalamnya. Rujuk semua servis kepada kakitangan yang berkelayakan.
• Avoid direct eye exposure to the light source. The LED light is very bright.
• Pastikan pengudaraan yang mencukupi di sekeliling unit. Jangan sekat bukaan pengudaraan.
• Mount the device securely using appropriate clampdan kabel keselamatan.
• Disconnect from mains power before cleaning or servicing.
• Jauhkan bahan mudah terbakar dari peranti.

3. Produk Lebihview

Familiarize yourself with the components of your Eurolite THA-250F LED Theater Spot.

Rajah 3.1: Bahagian hadapan view of the Eurolite THA-250F LED Theater Spot, showing the lens and mounting bracket.

Rajah 3.2: Sisi view of the unit, displaying the 'Eurolite LED THA-250F COB' branding.

Figure 3.3: Rear panel showing DMX IN/OUT, Power IN/OUT, and Fuse connections.

Figure 3.4: The included barndoors accessory, used to shape the light beam.

4. Persediaan

4.1 Pemasangan

The THA-250F is equipped with a robust mounting bracket for secure installation. Ensure the mounting surface or truss system can support the weight of the fixture (approximately 9.35 kg) and any additional accessories. Use appropriate clamps and always attach a safety cable to prevent accidental drops.

4.2 Sambungan Kuasa

Sambungkan kabel kuasa yang dibekalkan ke KUASA DI socket on the rear panel (refer to Figure 3.3). Plug the other end into a suitable grounded power outlet. The unit supports power linking via the KUASA KELUAR socket for convenience, allowing multiple units to be powered from a single source (ensure total current draw does not exceed circuit limits).

4.3 Sambungan DMX

For DMX control, connect a DMX cable from your DMX controller's output to the DMX DALAM socket on the THA-250F (refer to Figure 3.3). To daisy-chain multiple units, connect a DMX cable from the DMX KELUAR socket of the first unit to the DMX DALAM socket of the next unit. Always terminate the last unit in a DMX chain with a 120 Ohm DMX terminator.

5. Arahan Operasi

5.1 Panel Kawalan

The control panel, located on the side of the unit, allows for configuration and manual control. It features a display screen, four buttons, and two rotary knobs.

Rajah 5.1: Terperinci view of the control panel, showing MODE, ENTER, UP, DOWN buttons, and DIMMING, FOCUS knobs.

• ARAHAN: Menelusuri pilihan menu utama.
• MASUK: Mengesahkan pilihan atau memasuki sub-menu.
• ATAS BAWAH: Menavigasi pilihan menu atau melaraskan nilai parameter.
• DIMMING Knob: Manually adjusts the light intensity.
• FOCUS Knob: Manually adjusts the beam focus.

Figure 5.2: The display screen indicating the current DMX address (ADDR:032) and channel mode (CH:03).

5.2 Mod Pengendalian

The THA-250F can operate in several modes:

• Mod DMX: Allows external control via a DMX controller. Set the DMX address and channel mode using the control panel.
• Mod Manual: Control dimming and focus directly using the knobs on the control panel.
• Other modes (e.g., Standalone, Master/Slave) may be available. Refer to the on-screen menu for detailed options.

5.3 Operasi Asas

After powering on the unit, the display will show the current operating mode or DMX address. Use the MODE and ENTER buttons to navigate the menu. Use UP/DOWN to change values. The DIMMING and FOCUS knobs provide immediate manual control over light output and beam sharpness.

Figure 5.3: Two Eurolite THA-250F units in an operational setting, demonstrating their light output capabilities.

6. Penyelenggaraan

6.1 Pembersihan

Regular cleaning helps maintain optimal performance and extends the lifespan of your device. Disconnect the unit from power before cleaning.

• Gunakan kain lembut dan tidak berbulu untuk mengelap bahagian luar unit.
• For the lens, use a specialized lens cleaning solution and a microfiber cloth to avoid scratches.
• Periodically clean the ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.

6.2 Penyimpanan

When not in use, store the device in a dry, dust-free environment, away from extreme temperatures and humidity. If transporting, use appropriate protective cases.

7. Penyelesaian masalah

If you encounter issues with your Eurolite THA-250F, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Eurolite customer support or a qualified technician.

8. Spesifikasi

9. Waranti dan Sokongan

This product is manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, spare parts, or service inquiries, please contact Eurolite customer service directly or visit their official webtapak.

Pengilang: Eurolite