Marshall 04090940

Marshall Mode EQ Wired in-Ear Headphones User Manual

Model: 04090940

Jenama: Marshall

Produk Selesaiview

The Marshall Mode EQ headphones deliver powerful audio in a compact design. Featuring custom drivers for high-output sound with minimal distortion, and a unique in-ear design for a comfortable and secure fit. The integrated EQ switch on the remote allows for sound customization.

Marshall Mode EQ headphones, black with brass accents, showing both earbuds, the inline remote, and the L-shaped audio jack.

Imej: Tamatview of the Marshall Mode EQ headphones, highlighting the black earbuds with gold 'M' logo, the inline remote, and the L-shaped 3.5mm audio jack.

Persediaan

Pemilihan dan Kesesuaian Petua Telinga

The Marshall Mode EQ headphones come with multiple ear tip sizes to ensure optimal sound quality and comfort. Proper fit is crucial for achieving the intended audio performance and call clarity.

Close-up of the left Marshall Mode EQ earbud, showing the 'L' marking and the ear tip.

Image: Close-up of a single Marshall Mode EQ earbud, showing the 'L' (left) indicator and the silicone ear tip.

  1. Select the ear tips that provide the most snug and comfortable fit in your ear canals. Experiment with different sizes (small, medium, large, extra-large) to find the best seal.
  2. Gently insert each earbud into the corresponding ear (Left for 'L', Right for 'M' logo) until it feels secure and comfortable.
  3. Adjust the earbuds slightly to ensure a proper seal, which will enhance bass response and noise isolation.

Menyambung ke Peranti Anda

The Mode EQ headphones connect via a standard 3.5mm audio jack.

Close-up of the L-shaped 3.5mm audio jack of the Marshall Mode EQ headphones, with a gold-colored spring coil.

Image: Detail of the durable L-shaped 3.5mm audio jack, designed to prevent cable damage.

  1. Locate the 3.5mm headphone jack on your audio device (smartphone, tablet, laptop, etc.).
  2. Insert the L-shaped 3.5mm plug of the headphones firmly into the device's headphone jack.
  3. Pastikan sambungan selamat untuk mengelakkan gangguan audio.

Arahan Operasi

Kawalan Jauh Sebaris

The Marshall Mode EQ features an inline remote with a microphone and an EQ switch for convenient control of your audio and calls.

Close-up of the Marshall Mode EQ inline remote with microphone and EQ switch, showing the Marshall branding.

Image: The inline remote control of the Marshall Mode EQ headphones, featuring the Marshall logo, a button, and the EQ switch.

TindakanFungsi
Akhbar TunggalMainkan / Jeda muzik, Jawapan / Tamatkan panggilan
Tekan dua kaliLangkau ke trek seterusnya
Tiga TekanPergi ke trek sebelumnya
Tekan dan TahanActivate voice assistant (if supported by device)

Suis EQ

The Mode EQ headphones feature a unique EQ switch on the inline remote, allowing you to instantly switch between two distinct sound profiles:

  • EQ 1 (Bass-Heavy): Provides a warm sound with deep, rich bass, ideal for genres like rock, hip-hop, and electronic music.
  • EQ 2 (Balanced): Offers a more balanced sound profile with crisp mids and clear highs, suitable for acoustic, classical, and vocal-centric music.

To switch between EQ modes, simply slide the small switch located on the side of the inline remote.

Penyelenggaraan

To ensure the longevity and optimal performance of your Marshall Mode EQ headphones, follow these maintenance guidelines:

  • Pembersihan: Regularly wipe the earbuds and cable with a soft, dry cloth. For ear tips, remove them and clean with mild soap and water, then dry thoroughly before reattaching.
  • Storan: When not in use, store your headphones in a clean, dry place. Avoid extreme temperatures and direct sunlight. The tangle-resistant cable helps prevent knots, but gentle coiling is recommended.
  • Penjagaan Kabel: Avoid sharp bends or excessive pulling on the cable, especially near the connectors and earbuds, to prevent internal wire damage. The L-shaped jack is designed for durability, but proper handling is still important.
  • Penggantian Hujung Telinga: If ear tips become worn or lost, use only genuine Marshall replacement tips to maintain sound quality and fit.

Menyelesaikan masalah

If you encounter issues with your Marshall Mode EQ headphones, refer to the following common solutions:

MasalahPenyelesaian
Tiada suara atau kelantangan rendahEnsure the 3.5mm jack is fully inserted into your device. Check the volume level on your device and ensure it's not muted. Test with another audio source or device to rule out device issues. Clean the ear tips and ensure they are properly seated on the earbuds.
Bunyi herotLower the volume on your device. Ensure the ear tips are clean and properly fitted. Test with another audio source.
Mikrofon tidak berfungsiEnsure the 3.5mm jack is fully inserted. Check your device's settings to ensure the correct microphone input is selected. Test the microphone with another application or device.
Fon telinga terjatuhExperiment with different ear tip sizes to find a more secure fit. Ensure the earbuds are inserted correctly into your ear canal.

Spesifikasi

CiriPerincian
Nama Model04090940
Teknologi Ketersambunganberwayar
Jack Fon KepalaJack 3.5 mm
Julat Kekerapan20 Hz - 20,000 Hz
Jenis KawalanRemote (with EQ switch)
Mikrofonya
Ciri KabelRetractable, Tangle-resistant
bahanBrass accents
Berat Barang0.564 auns
Dimensi7.28 x 3.82 x 2.05 inci (pembungkusan)

Video Produk Rasmi

Watch this video for a detailed review and demonstration of the Marshall Mode EQ in-Ear Headphones.

Video: Semula menyeluruhview of the Marshall Mode EQ in-Ear Headphones, covering features, design, and sound quality. (Source: AudioProWork)

Waranti dan Sokongan

Untuk maklumat jaminan dan sokongan pelanggan, sila rujuk Marshall rasmi webtapak atau dokumentasi yang disertakan dengan produk anda.

Anda juga boleh mendapatkan sokongan tambahan dan soalan lazim di Kedai Marshall di Amazon.

Manual pengguna PDF juga boleh dimuat turun: Muat turun Manual Pengguna (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.