pengenalan
This manual provides detailed instructions for the safe installation, operation, and maintenance of your RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture. Please read this manual thoroughly before installation and retain it for future reference.
Maklumat Keselamatan Penting
- AMARAN: Risiko renjatan elektrik. Putuskan sambungan kuasa pada fius atau pemutus litar sebelum memasang atau menservis.
- Pemasangan mesti dilakukan oleh juruelektrik bertauliah mengikut semua kod elektrik nasional dan tempatan.
- Jangan pasang berhampiran bahan mudah terbakar.
- Pastikan lekapan dibumikan dengan betul.
- Jangan cuba mengubah suai lekapan.
- Suitable for wet locations, wall mount only.
Kandungan Pakej
Sahkan bahawa semua komponen hadir sebelum memulakan pemasangan:
- RAB Lighting LED Bullet Flood 2x12W Fixture (1)
- Mounting Hardware (screws, wire nuts) (1 set)
- Manual Arahan (1)
Image: RAB Lighting LED Bullet Flood 2x12W Adjustable Dual Heads fixture in white finish. This image shows the two adjustable LED floodlight heads attached to a central mounting base.
Spesifikasi
| Ciri | Perincian |
|---|---|
| Nombor Model | SMSBULLET2X12NA |
| Sumber Kuasa | Elektrik Berwayar, 120 Volt |
| Wattage | 24 Watts (2x12W LED) |
| Output Cahaya | 1664 Lumen |
| Suhu Warna | 5000 Kelvin (Putih Sejuk) |
| Jenis Sumber Cahaya | LED |
| bahan | Metal (Fixture), Plastic (Shade) |
| Jenis Selesai | putih |
| Jenis Pemasangan | Dipasang di Dinding |
| Penggunaan Dalaman/Luar | Outdoor (Suitable for wet locations) |
| Dimensi | 14.3 x 8.2 x 7.8 inci |
| Berat badan | 4.99 paun |
Persediaan dan Pemasangan
Alat yang Diperlukan: Screwdriver, Wire Strippers, Pliers, Electrical Tape, Voltage Tester, Ladder (if necessary).
- Matikan Kuasa: Locate the circuit breaker or fuse box controlling the power to the installation area. Turn off the power completely before proceeding. Verify power is off using a voltage penguji.
- Sediakan Permukaan Pemasangan: Ensure the mounting surface is clean, dry, and structurally sound. This fixture is designed for wall mounting only.
- Pasang Lekapan: Secure the fixture's mounting base to the wall using the provided mounting hardware. Ensure a tight and stable connection.
- Sambungan Wayar: Connect the fixture's wires to the corresponding household electrical wires.
- Sambungkan hitam wayar lekapan ke hitam (hot) supply wire.
- Sambungkan putih wayar lekapan ke putih wayar bekalan (neutral).
- Sambungkan hijau or bare copper fixture wire to the hijau or bare copper (ground) supply wire.
Selamatkan semua sambungan dengan nat wayar dan pita elektrik.
- Sambungan meterai: Ensure all wire connections are properly insulated and tucked into the junction box.
- Perhimpunan Akhir: Attach the fixture body to the mounting base, ensuring it is securely fastened.
- Pulihkan Kuasa: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box.
Arahan Operasi
The RAB Lighting LED Bullet Floodlight is designed for straightforward operation.
- Hidupkan/Mati Kuasa: The fixture is controlled by the wall switch or external control device connected to its power supply.
- Melaraskan Kepala Lampu: The two LED floodlight heads are independently adjustable. Loosen the adjustment screws on each head, position the light beam as desired, and then securely tighten the screws to maintain the position.
- Output Cahaya: The fixture provides 1664 lumens of 5000K cool white light.
Penyelenggaraan
Penyelenggaraan berkala memastikan prestasi optimum dan jangka hayat lampu limpah anda.
- Pembersihan: Bersihkan bahagian luar lekapan secara berkala dengan kain lembutamp kain. Jangan gunakan pembersih atau pelarut yang melelas. Pastikan kuasa dimatikan sebelum membersihkan.
- Pemeriksaan: Annually inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- LED: The integrated LED light sources are designed for long life (100,000 hours) and are not user-replaceable.
Menyelesaikan masalah
| Masalah | Kemungkinan Punca | Penyelesaian |
|---|---|---|
| Cahaya tidak menyala. | Tidak ada kekuatan untuk perlawanan. Sambungan pendawaian longgar. Suis rosak. | Periksa pemutus litar/fius. Sahkan semua sambungan wayar selamat (pastikan kuasa dimatikan dahulu). Uji atau ganti suis. |
| Cahaya berkelip-kelip. | Sambungan pendawaian longgar. Suis dimmer yang tidak serasi (jika berkenaan). | Periksa dan selamatkan semua sambungan pendawaian. This fixture is not specified as dimmable; ensure it's connected to a standard ON/OFF switch. |
| Pengeluaran cahaya berkurangan. | Dirt or debris on lens. | Clean the diffusion lens with a soft, damp kain. |
If issues persist after troubleshooting, contact RAB Lighting customer support.
Maklumat Waranti
This RAB Lighting product comes with a Limited Warranty. For specific terms, conditions, and duration of the warranty, please refer to the official RAB Lighting webtapak atau hubungi perkhidmatan pelanggan mereka. Simpan bukti pembelian anda untuk tuntutan waranti.
Sokongan Pelanggan
For technical assistance, replacement parts, or warranty inquiries, please contact RAB Lighting directly:
- Webtapak: www.rablighting.com
- telefon: Refer to the RAB Lighting webtapak untuk nombor hubungan semasa.