RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Produk Lebihview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Ciri-ciri Utama:

• Kuasa: 39-watt LED
• Suhu Warna: 5100K Putih Sejuk
• Jangka hayat: 100,000 hours based on LM-80 tests
• LED: Three multi-chip 13-watt high-performance LEDs
• Optik: NEMA type 7H x 6V with Air-flow technology heatsink
• Pemantul: Semi-specular anodized aluminum
• Gasket: Silikon suhu tinggi
• Selesai: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Maklumat Keselamatan

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Keselamatan Elektrik: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• Pembumian: The fixture must be properly grounded to prevent potential electric shock.
• Pemasangan: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Suhu Operasi: Do not operate the fixture outside its specified temperature range.
• LED: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Pemasangan

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Alat yang Diperlukan:

• Pemutar skru (Phillips dan kepala rata)
• Strippers wayar
• Tang
• Drill (if mounting surface requires pilot holes)
• Sepana boleh laras

Pilihan Pemasangan:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Gambar 2: Cthample of a Slipfitter Mount (optional accessory)

Langkah Pemasangan:

1. Putuskan Kuasa: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage penguji.
2. Sediakan Permukaan Pemasangan: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Sambungan Wayar:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Sambungkan wayar putih dari lekapan ke wayar neutral (N) dari bekalan kuasa.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Lekapan Lekapan: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Laraskan Matlamat: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Pulihkan Kuasa: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Operasi

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Operasi Standard:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Gambar 3: Cthample of a Photocell (optional accessory)

5. Penyelenggaraan

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Pembersihan:

• Luaran: Bersihkan bahagian luar lekapan secara berkala dengan kain lembutamp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Kanta: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Pemeriksaan:

• Periksa lekapan secara berkala untuk sebarang tanda kerosakan, sambungan longgar atau haus.
• Pastikan semua perkakasan pemasangan kekal ketat dan kukuh.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Penyelesaian masalah

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Spesifikasi

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Waranti dan Sokongan

Waranti Pengilang:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a Waranti pengilang selama 1 tahun dari tarikh pembelian. Waranti ini melindungi kecacatan pada bahan dan mutu kerja di bawah penggunaan dan perkhidmatan biasa.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Sokongan Pelanggan:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webtapak untuk butiran hubungan semasa.