Health o meter 498KL Remote Read Digital Stand-on Scale User Manual

1. Pengenalan

This manual provides instructions for the proper setup, operation, and maintenance of your Health o meter 498KL Remote Read Digital Stand-on Scale. This professional-grade digital scale is designed for accurate weight measurement and Body Mass Index (BMI) calculation, featuring a remote display for convenience.

2. Maklumat Keselamatan Penting

• Place the scale on a firm, flat, and level surface to ensure accurate readings.
• Jangan gunakan penimbang pada permukaan basah atau licin.
• Elakkan daripada menjatuhkan atau meletakkan skala kepada kesan yang kuat.
• Keep the scale away from excessive heat, direct sunlight, and moisture.
• Do not attempt to disassemble or repair the scale yourself. Contact qualified service personnel.
• Ensure proper power source is used (AC adapter or batteries) as specified.

3. Kandungan Pakej

Sahkan bahawa semua komponen hadir:

• Health o meter 498KL Scale Platform
• Remote Digital Display Unit
• Connecting Cable (for display unit)
• Manual Pengguna (dokumen ini)
• AC Adapter (optional, may be sold separately)
• Batteries (if included, typically AA or AAA)

4. Persediaan

4.1 Membongkar

Keluarkan semua komponen dari pembungkusan dengan berhati-hati. Simpan pembungkusan untuk penyimpanan atau pengangkutan masa hadapan.

4.2 Bekalan Kuasa

The scale can be powered by either an AC adapter (optional) or batteries.

1. Menggunakan Bateri: Locate the battery compartment on the underside of the remote display unit. Insert the required batteries (e.g., 4 x AA) according to the polarity indicators.
2. Menggunakan Penyesuai AC: If using an AC adapter, plug the adapter into the designated port on the remote display unit and then into a standard electrical outlet.

4.3 Menyambungkan Unit Paparan

Connect the remote digital display unit to the scale platform using the provided connecting cable. Ensure the connection is secure.

4.4 Penempatan

Place the scale platform on a hard, flat, and stable surface. Avoid carpets or uneven flooring, which can affect accuracy. Position the remote display unit in a convenient location for viewing.

5. Arahan Operasi

The remote display unit features an easy-touch keypad with several function buttons. Refer to the image below for button identification.

Image 1: Health o meter 498KL Remote Read Digital Stand-on Scale Control Panel. This image shows the remote display unit with its LCD screen and various buttons including ON/OFF, HOLD/RELEASE, LB/KG, BMI, UP, DOWN, ZERO, CLEAR, and ENTER.

5.1 Hidupkan/Mati Kuasa

Tekan ke HIDUP/MATI button to turn the scale on or off. The display will show "0.0" when ready for use.

5.2 Zeroing the Scale

Before each use, ensure the scale is zeroed. If the display does not show "0.0" when empty, press the SIFAR butang.

5.3 Prosedur Penimbangan

1. Hidupkan penimbang menggunakan HIDUP/MATI butang.
2. Wait for the display to show "0.0".
3. Carefully step onto the center of the scale platform. Stand still until your weight is displayed and stabilizes.
4. Read your weight from the remote display.
5. Step off the scale. The display will return to "0.0" or turn off automatically after a period of inactivity.

5.4 Changing Weight Units (LB/KG)

To switch between pounds (LB) and kilograms (KG), press the LB / KG button. The current unit will be indicated on the display.

5.5 BMI Calculation

To calculate Body Mass Index (BMI):

1. Hidupkan penimbang dan pastikan ia bernombor sifar.
2. Tekan ke BMI button. The display may prompt for height input.
3. Gunakan UP dan TURUN buttons to enter your height.
4. Tekan MASUK to confirm your height.
5. Step onto the scale. After your weight is measured, the scale will display your calculated BMI.

5.6 Fungsi Tahan/Lepaskan

The TAHAN/LEPASKAN button can be used to hold the displayed weight after a measurement, even after stepping off the scale. Press it again to release the hold and return to normal operation.

5.7 Clear Function

The JELAS button is used to clear previous entries or measurements, often in conjunction with BMI calculation or other advanced functions.

5.8 Up/Down Buttons

The UP dan TURUN buttons are primarily used for navigating menus or adjusting values, such as entering height for BMI calculation.

6. Penyelenggaraan

6.1 Pembersihan

Wipe the scale platform and display unit with a soft, damp kain. Jangan gunakan pembersih yang melelas atau rendam unit di dalam air.

6.2 Penyimpanan

Store the scale in a dry, cool place. If storing for an extended period, remove the batteries to prevent leakage.

6.3 Penentukuran

This scale is factory calibrated. If you suspect inaccuracies, consult the manufacturer's support or a qualified service technician.

7. Penyelesaian masalah

• No Display / Low Battery Indicator: Check battery installation or replace batteries. If using AC adapter, ensure it is properly connected and the outlet is functional.
• Bacaan Tidak Tepat: Ensure the scale is on a flat, stable surface. Re-zero the scale before use. Avoid moving during measurement.
• "ERR" Message: This typically indicates an overload (weight exceeds maximum capacity) or a measurement error. Step off the scale, wait for it to clear, and try again.
• Display Freezes: Try turning the scale off and on again. If the issue persists, remove and reinsert batteries or disconnect/reconnect the AC adapter.

8. Spesifikasi

9. Waranti dan Sokongan

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official Health o meter webtapak.

Penafian Undang-undang: Kenyataan mengenai suplemen diet belum dinilai oleh FDA dan tidak bertujuan untuk mendiagnosis, merawat, menyembuhkan atau mencegah sebarang penyakit atau keadaan kesihatan.