Leviton 5362-SI

Leviton 5362-SI Industrial Grade Duplex Receptacle Instruction Manual

Model: 5362-SI

1. Pengenalan

This instruction manual provides essential information for the safe installation, operation, and maintenance of your Leviton 5362-SI Industrial Heavy Duty Grade Duplex Receptacle. Please read this manual thoroughly before beginning installation or use to ensure proper function and safety.

The Leviton 5362-SI is a 20-Amp, 125 Volt, straight blade, self-grounding duplex receptacle designed for demanding industrial and commercial environments. It features a durable thermoplastic nylon body and face, and a 5-20R configuration.

2. Maklumat Keselamatan Penting

AMARAN: Risk of electric shock or fire. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Installation should be performed by a qualified electrician in accordance with all national and local electrical codes.

  • Always disconnect power at the service panel before working with electrical wiring.
  • Use only copper or copper-clad wire. Do not use aluminum wire with this device.
  • Pastikan semua sambungan wayar selamat dan terlindung dengan betul.
  • Do not exceed the specified electrical ratings of 20 Amps and 125 Volts.
  • This device is intended for indoor use in dry locations unless protected by a weather-resistant enclosure.
  • Sekiranya anda tidak pasti mengenai mana-mana bahagian arahan ini, berjumpa dengan juruelektrik yang berkelayakan.

3. Ciri-ciri Produk

  • Impact-Resistant Thermoplastic Nylon: Durable face and body designed for harsh environments.
  • Smooth Face: Resists dirt accumulation for easier cleaning.
  • Large, Triple-Wipe Brass "T" Contacts: Ensures superior contact and conductivity for reliable power.
  • Back and Side-Wiring Options: Provides flexibility for installation.
  • Pemasaran Kendiri: Simplifies installation by automatically grounding to a properly grounded metal wall box.
  • UL 498, CSA C22.2, NOM Approved: Memenuhi piawaian keselamatan dan prestasi yang diiktiraf.

4. Spesifikasi

AtributNilai
Nombor Model5362-SI (002-05362-0SI)
taipDuplex Receptacle, Straight Blade
Penilaian Semasa20 Amperes
Voltage Peringkat125 Volt
Konfigurasi5-20R
PembumianPemasaran Diri
bahanThermoplastic Nylon (Body/Face), Brass (Contacts)
warnagading
Dimensi1.09 x 1.33 x 4.06 inci
KelulusanUL 498, CSA C22.2, NOM

5. Persediaan dan Pemasangan

Alat yang Diperlukan: Screwdriver (Phillips and flathead), wire strippers, electrical tape, voltage penguji.

AMARAN: Ensure power is OFF at the circuit breaker before proceeding.

  1. Matikan Kuasa: Cari pemutus litar atau fius yang mengawal soket yang anda ganti atau pasang. Matikannya. Sahkan kuasa dimatikan menggunakan voltantage penguji.
  2. Keluarkan Bekas Lama (jika berkenaan): Unscrew the wall plate and then the mounting screws holding the old receptacle to the electrical box. Carefully pull the old receptacle out of the box.
  3. Putuskan Sambungan Wayar: Loosen the terminal screws and disconnect the wires from the old receptacle. Note which wire was connected to which terminal (hot, neutral, ground).
  4. Sediakan Wayar: If necessary, strip approximately 1/2 inch of insulation from the ends of the wires. Ensure wire ends are clean and straight.
  5. Connect Wires to New Receptacle:
    • Green or Bare Copper Wire (Ground): Connect to the green grounding screw.
    • White Wire (Neutral): Connect to the silver terminal screw.
    • Black or Colored Wire (Hot): Connect to the brass terminal screw.

    For back-wiring, insert the stripped wire into the appropriate hole and tighten the screw. For side-wiring, loop the wire clockwise around the screw terminal and tighten securely.

  6. Bekas Gunung: Carefully fold the wires into the electrical box. Secure the new receptacle to the electrical box using the provided mounting screws.
  7. Pasang Plat Dinding: Attach the wall plate over the receptacle.
  8. Pulihkan Kuasa: HIDUPKAN semula kuasa pada pemutus litar.
  9. Ujian: Test the receptacle with a known working device or outlet tester.
Leviton 5362-SI Industrial Grade Duplex Receptacle, Ivory

Imej 1: Depan view of the Leviton 5362-SI Industrial Grade Duplex Receptacle in Ivory. This image shows the two 5-20R configured outlets, the mounting strap, and the self-grounding screw.

6. Arahan Operasi

Once properly installed and power is restored, the Leviton 5362-SI receptacle functions as a standard electrical outlet. Simply insert the plug of your electrical device into one of the two available receptacles. Ensure the plug is fully inserted for a secure connection.

This receptacle is designed for devices requiring up to 20 Amps at 125 Volts. Do not overload the circuit by plugging in devices that collectively exceed the circuit's rating.

7. Penyelenggaraan

  • Pembersihan: Untuk membersihkan bekas, pertama matikan kuasa pada pemutus litar. Gunakan yang lembut, damp kain untuk mengelap permukaan. Jangan gunakan pembersih atau pelarut yang melelas. Pastikan bekas kering sepenuhnya sebelum memulihkan kuasa.
  • Pemeriksaan Berkala: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power immediately and have the receptacle inspected and replaced by a qualified electrician.
  • Ketegangan Sambungan: If you suspect a loose connection, turn off power and have a qualified electrician check and tighten all terminal screws.

8. Penyelesaian masalah

  • No Power at Receptacle:
    • Check the circuit breaker or fuse box. A tripped breaker or blown fuse will cut power to the circuit. Reset the breaker or replace the fuse.
    • Ensure the receptacle is properly wired. If unsure, consult a qualified electrician.
    • Verify that the power supply to the electrical box is active using a voltage penguji.
  • Loose Plug Connection: If plugs feel loose in the receptacle, the internal contacts may be worn. The receptacle should be replaced by a qualified electrician.
  • Terlalu panas: If the receptacle feels warm to the touch, immediately disconnect any devices and turn off power. This could indicate an overload or a faulty connection. Consult a qualified electrician.

9. Maklumat Waranti

This Leviton 5362-SI Industrial Grade Duplex Receptacle is backed by a Waranti Sepuluh Tahun Terhad. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Leviton webtapak.

10. Sokongan Pelanggan

For technical assistance, product information, or warranty claims, please visit the official Leviton webtapak atau hubungi bahagian perkhidmatan pelanggan mereka.

Visit the Leviton Store

© 2023 Leviton Manufacturing Co., Inc. Hak cipta terpelihara.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.