Sustainable LED lighting solutions | Philips lighting
Installation Guide for PHILIPS models including: LL500E H4 Gen2 Maxos Fusion, LL500E H4 Gen2, Maxos Fusion, Fusion
LL500E H4 Gen2 WH | 910925869489 | Philips lighting
2/2 You must have a lighting plan, if you install the warehouse system. Do not install the warehouse system control unit close to steel or concrete
Philips 772793 Capteur interact pro pour maxos fusion ll500e h4 gen2 wh
File Info : application/pdf, 2 Pages, 2.09MB
DocumentDocumentMaxos Fusion LL500E Gen2 indoor 50Hz 220V 60Hz 240V LEDs Max. 35 °C Min. IP20 IK02 -20 °C LL500T LL500E H4 Gen2 212 kg 0,6 97 FRONT SIDE BACK SIDE 60 O 115 FRONT SIDE PE N L1 L2 L3 4 5 6 LL500E H4 Gen2 PE SR+ SR- BACK SIDE 7 8 9 10 Trunk Compatibility 11 LL...T 7... LL...T 9... LL...T 13... - for use with SR drivers - one sensor can support Max 4 drivers. DALI line needs to be interrupted after max 4 drivers - use the supplied T2T connector to electrically separate group of 1 sensor + 4 drivers with another group along the line rail standard T2T connector supplied T2T connector sensor panel 1 2 1 ! 2 1 1 442710472830 2023-03-07 © Signify Holding All rights reserved 1/2 Printed in Poland Data subject to change without notice Keep for future reference: www.philips.com/lighting Position m (ft) Mounting Height m (ft) Max. height: 16m (52.5 ft) ! GREY BROWN OR BLUE 20 (65.6) 15 (49.2) 10 (32.8) 5 (16.4) 0 (0) -5 (-16.4) -10 (-32.8) -15 (-49.2) Top view -20 (-65.6) -15 -10 -5 0 5 10 15 20 (-49.2) (-32.8) (-16.4) (0) (16.4) (32.8) (49.2) (65.6) Position m (ft) 0 Side view (0) 2 (6.6) 4 (13.1) 6 (19.7) 8 (26.2) 10 (32.8) 12 (39.4) 14 (45.9) 16 (52.5) -20 -15 -10 -5 (-65.6) (-49.2)(-32.8) (-16.4) 0 5 10 15 20 (0) (16.4) (32.8) (49.2) (65.6) Horizontal position m (ft) Max. coverage: 17.6 m (57.7 ft) PIR occupancy sensing D Notes The white areas are blind spots and the detection is based on the motion of the subject. An idle subject may not continue to trigger occupancy detection once the hold time expires. ·As PIR based sensing works on temperature difference between the subject and the ground level, the occupancy detection could vary due ·to clothing and size of the subject. You must have a lighting plan, if you install the warehouse system. Do not install the warehouse system control unit close to steel or concrete constructions. Do not block the view of the warehouse system sensor. 2/2