User Guide for onn models including: CE-2206B, CE-2206B Wireless Earphones, Wireless Earphones, Earphones
Cosonic Intelligent Technologies Co.,Ltd. ONN100069415 2ALVK-ONN100069415 2ALVKONN100069415 onn100069415
File Info : application/pdf, 1 Pages, 1.61MB
DocumentDocument" :mm A B C 200 150-<200 100<150 60-<100 " ±0.25 ±0.40 ±0.80 ±0.20 ±0.35 ±0.70 ±0.16 ±0.30 ±0.60 ±0.13 ±0.25 ±0.50 30-<60 ±0.10 ±0.20 ±0.40 10-<30 ±0.07 ±0.15 ±0.30 1-<10 ±0.05 ±0.10 ±0.20 <1 ±0.03 ±0.05 ±0.10 ANGLES ±0.5° ±1° ±1° # $ 95±1mm USER GUIDE Wireless Earphones Contents & Information INFORMATION Features OVERVIEW SAFETY PRECAUTIONS OPERATION CLEANING & CARE Cleaning SPECIFICATIONS TROUBLESHOOTING AAWHT100069415/AAASH100069415_EN 95±1mm Overview Features ·Speaker Diameter: ø13mm ·Up to 5.5 hours of playtime per charge; +3 additional case charges = 22 overall hours of playtime. ·Model:AAWHT100069415/AAASH100069415 ·Charging cable: 25cm ·Earphones will auto-pause when you remove them from your ears. When you put earphones back to your ears, the music will auto-play. ·IPX4 waterproof applies to earphones, not to the charging case. CHARGING CASE CHARGING PORT (Bottom view) LED INDICATOR PAIRING/ RESET BUTTON CHARGING CABLE LED INDICATOR MICROPHONE 1 Touch Control Area EARPHONES MICROPHONE 2 Safety Precautions FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov Warning: Changes or modifications to this unit not espressly approved by the party responsible for compliance could void the user´s authority to operate the equipment. Need help? We're here for you every day from 7 a.m.-9 p.m. CST. Give us a call at 1-888-516-2630. Produced for Walmart Inc., Bentonville, AR 72716 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head. Ver.01 24/04/24 IC11136A-ONN69415 FCC ID2ALVK-ONN100069415 For product assistance WE CAN HELP 1-888-516-2630 7 DAYS/WEEK 7:00am- 9:00pm CST THIS GUIDE CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Find more at Front 760mm Operation FIRST TIME SETUP Device may need to be charged before use. CAUTION Only use a USB charging device that is 5V DC output. POWER ON & POWER OFF POWER ON Open charging case, earphones will auto-power on and connect to the last time paired device. POWER OFF Place earphones into charging case and close lid, earphones will be charged and disconnect from your device. PAIRING A. If this is your first time use these earphones, follow FIRST TIME SETUP instructions. B. If you want to pair with another device, place earphones back to charging case and keep the lid open, press and hold the button at the bottom of the charging case for 3 seconds. LED light on earphones are flashing, now you can search it from another device. 1. Remove the protective film before the first use, then place both earphones back into charging case and close the lid. 2. Open the charging case, earphones will power on and go to pairing mode automatically. Connect to your device by selecting "onn. True Wireless ENC". Note: Without the charge case, you can also manually power on/off the earphones by touch and holding the control area for 5 seconds. 5S 3S onn. True Wireless ENC PLAY MUSIC Control (Either one) Left one Right one Action ×2 Touch ×3 Touch Hold 1.5 sec Hold 1.5 sec PHONE CALLS Control Action ×2 Touch (Either one) ×2 Touch Hold 1.5 sec Result Play / Pause Siri/Voice Assistant Previous Track Next Track Result Answer incoming call End incoming call Reject incoming call CHARGE Earphones charging Place earphones back into charging case and close the lid, earphones may take up to 1.5 hours to get fully charged when at 0% battery. Case charging It is recommended to use the provided charging cable connect USB-A end to 5V power adapter or other devices, connect USB-C end to the charging port of the case. Note: Device may take 2 hours to get fully charged when at 0%. Cleaning & Care CLEANING 1. 2. Never use abrasive pads to clean device. 3. Avoid using liquids to clean device. 4. Use cotton swab to clean the charge case internal area if needed, to avoid out-of-contact charging issues between earphones and charging case. L R Note: 15 mins charge can provide around 2 hours playtime. About 2hours (5V 0.5A) Use Charging cable Charging: Red LED light is on Fully charged: Blue LED light is on Specifications Weight 0.1 lb Product Dimensions (L x W x H) 1.94 x 0.98 x 2.08 inches Troubleshooting Problem Prevention/Solution Cannot find "onn. True Wireless ENC" on my Bluetooth device. Sound is not produced Ensure Bluetooth function is enabled on your device. Double check if the earphones already connected to last-time paired device. Ensure you have earphones connected to Bluetooth device, then increase volume from your device. Cannot power on Charge both earphone and case for enough time. Clean the contact area for earphones and charging case, ensure earphones contact well in the case when charging. Only one earphone has sound Only one earphone can connect Can't connect/pair Place both earphones into charging case and keep the lid open, press and hold reset button for 10 seconds, to reset both earphones and charging case. When you see red LED light flashing 3 times on earphones and charging case, it means reset successful. Follow FIRST TIME SETUP to pair again. Back USER GUIDE Wireless Earphones # $ AAWHT100069415/AAASH100069415_EN_12052023 1.()RoHS2.0REACHCP65 2. 157G 3.4C+1 % 4. 5.- Bogle 6. 7. 8./ 9. NO / : CE-2206B : % : 300404131331D50 : : : : : mm : 1/1 : : 1/1 : A/0