TURN RAISE AT040 210° Two-Way Articulating Borescope User Manual

1. परिचय

Thank you for choosing the TURN RAISE AT040 210° Two-Way Articulating Borescope. This industrial endoscope is designed for detailed visual inspection in hard-to-reach areas, featuring a dual-lens system, a 7-inch IPS display, and a flexible articulating probe. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use.

2. उत्पादन संपलेview

2.1 प्रमुख वैशिष्ट्ये

• 210° Two-Way Articulating Probe: Allows precise control and locking of the probe tip for optimal viewकोन.
• ड्युअल-लेन्स सिस्टम: Front and side cameras for comprehensive inspection, supporting split-screen display.
• 7-इंच आयपीएस डिस्प्ले: Provides a wide and clear view of inspection areas.
• 0.25-inch (6.5mm) Slim Probe: Designed for access into small diameter gaps.
• समायोज्य एलईडी प्रदीपन: Integrated lights on the probe with adjustable brightness for clear visibility in dark environments.
• फोटो आणि व्हिडिओ रेकॉर्डिंग: Capture images and videos to a 32GB memory card.
• अर्गोनॉमिक डिझाइन: Facilitates comfortable one-hand operation.
• अंगभूत ५०००mAh बॅटरी: Offers up to 4 hours of continuous operation.
• IP67 Rated Probe: Water-resistant for use in damp किंवा ओले परिस्थिती.

2.2 पॅकेज सामग्री

• Borescope with light (Main Unit) x1
• कॅरींग केस x1
• टाइप-सी चार्जिंग केबल x1
• वापरकर्ता मॅन्युअल x1
• 32GB Memory Card (pre-installed or separate) x1

२.१ उपकरण घटक

Figure 1: Main components of the TURN RAISE AT040 Borescope, including the display unit, articulating probe, and protective carrying case.

Figure 2: The large 7-inch IPS screen provides a clear and detailed view during inspections.

Figure 3: The ultra-slim 0.25-inch (6.5mm) probe allows access into very narrow spaces.

3. सेटअप

3.1 डिव्हाइस चार्ज करणे

1. Connect the provided Type-C charging cable to the charging port on the borescope unit.
2. केबलचे दुसरे टोक एका मानक USB पॉवर अॅडॉप्टरशी (समाविष्ट नाही) किंवा संगणक USB पोर्टशी जोडा.
3. The charging indicator will illuminate. A full charge typically takes approximately 4 hours. Ensure the device is fully charged before first use for optimal battery life.

3.2 मेमरी कार्ड घालणे

The device supports a 32GB memory card for storing images and videos. If not pre-installed, locate the memory card slot (usually on the side of the display unit) and gently insert the card until it clicks into place. Ensure the card is inserted in the correct orientation.

3.3 Attaching the Probe

The articulating probe is typically pre-attached. If it needs to be connected, align the connector on the probe cable with the port on the main unit and secure it firmly. Do not force the connection.

4. ऑपरेटिंग सूचना

4.1 पॉवर चालू/बंद

• चालू करण्यासाठी: पॉवर बटण दाबा आणि धरून ठेवा (🏻) for a few seconds until the screen illuminates.
• पॉवर ऑफ करण्यासाठी: पॉवर बटण दाबा आणि धरून ठेवा (🏻) again until the screen shuts down.

4.2 Basic Navigation and Menu

Use the directional buttons and the 'OK' button to navigate through menus and confirm selections. The 'Menu' button typically accesses settings such as resolution, date/time, and language.

३.१ आर्टिक्युलेटिंग प्रोब कंट्रोल

Figure 4: The probe tip can be articulated up to 210 degrees in two directions using the control wheel.

The AT040 features a 210° two-way articulating probe. To control the probe tip:

1. Locate the control wheel on the handle of the borescope.
2. Rotate the wheel to bend the probe tip in the desired direction.
3. The probe tip can be locked at any angle by holding the wheel in position, allowing for stable viewing

4.4 Dual-Lens and Split-Screen Functionality

आकृती 5: स्फोट view of the dual-lens camera system, providing 1080P HD imaging.

The borescope is equipped with both a front-facing and a side-facing lens. To utilize this feature:

• Press the dedicated dual-lens button (refer to device interface for icon, typically two overlapping squares or similar) to switch between single front view, single side view, किंवा स्प्लिट-स्क्रीन डिस्प्ले.
• In split-screen mode, both camera feeds are shown simultaneously on the 7-inch IPS screen, enhancing inspection efficiency.

४.५ एलईडी ब्राइटनेस समायोजित करणे

Figure 6: The IP67 rated probe features adjustable LED lights for optimal illumination in various conditions.

To adjust the brightness of the LED lights on the probe tip:

• Locate the LED brightness control button (often indicated by a light bulb icon).
• Press the button repeatedly to cycle through different brightness levels or use a dedicated dial if available.

३.५ फोटो आणि व्हिडिओ कॅप्चर करणे

The borescope supports capturing JPG images and AVI video recordings.

• फोटो काढण्यासाठी: Press the 'Photo' button (typically a camera icon). The image will be saved to the inserted memory card.
• व्हिडिओ रेकॉर्ड करण्यासाठी: Press the 'Video' button (typically a video camera icon) to start recording. Press it again to stop recording. Videos are saved to the memory card.
• The device also supports audio recording via a built-in microphone during video capture.

4.7 Flexible Rigid Gooseneck

Figure 7: The flexible rigid gooseneck probe can be bent and shaped to suit various inspection needs.

The probe cable is designed to be flexible yet rigid enough to hold its shape. This allows you to bend, shape, and extend the probe to navigate complex pathways and maintain the desired viewing angle during inspection.

5. देखभाल

5.1 स्वच्छता

• Probe and Lens: After each use, especially in dirty environments, gently wipe the probe and camera lenses with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by drying. Ensure no liquid enters the probe tip.
• डिस्प्ले स्क्रीन: Clean the IPS screen with a soft, lint-free cloth. Avoid abrasive cleaners.
• मुख्य युनिट: Wipe the main unit with a dry or slightly damp कापड मुख्य युनिट पाण्यात बुडवू नका.

5.2 बॅटरी काळजी

• बॅटरीचे आयुष्य वाढवण्यासाठी, वारंवार बॅटरी पूर्णपणे डिस्चार्ज करणे टाळा.
• बॅटरीची कार्यक्षमता राखण्यासाठी, वापरात नसले तरीही, डिव्हाइस नियमितपणे चार्ज करा.
• जास्त काळ वापरात नसताना उपकरण थंड, कोरड्या जागी ठेवा.

५.८.१ स्टोरेज

Store the borescope and its accessories in the provided carrying case to protect it from dust, impacts, and environmental damage. Keep it away from extreme temperatures and direct sunlight.

6. समस्या निवारण

7. तपशील

8. हमी आणि समर्थन

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact the TURN RAISE customer support directly. Keep your purchase receipt as proof of purchase.