1. परिचय
This manual provides detailed instructions for the installation, operation, and maintenance of your TOBUSA Solar Outdoor Motion Sensor Flood Lights, Model YC-SW2881-2. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
2. सुरक्षितता माहिती
- इष्टतम चार्जिंगसाठी सौर पॅनेल थेट सूर्यप्रकाश मिळणाऱ्या ठिकाणी बसवले आहे याची खात्री करा.
- उत्पादन वेगळे करण्याचा किंवा सुधारित करण्याचा प्रयत्न करू नका. यामुळे वॉरंटी रद्द होऊ शकते आणि सुरक्षिततेला धोका निर्माण होऊ शकतो.
- Keep the product away from open flames or extreme heat sources.
- Handle the product with care during installation to prevent damage.
- स्थानिक नियमांनुसार बॅटरी आणि इलेक्ट्रॉनिक घटकांची विल्हेवाट लावा.
3. पॅकेज सामग्री
पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:
- Solar Lights (2 units)
- Solar Panels (2 units)
- Remote Controls (2 units)
- सूचना पुस्तिका (हा दस्तऐवज)
- माउंटिंग स्क्रू आणि अँकर
4. उत्पादनाची वैशिष्ट्ये
- Solar-Powered & Dusk to Dawn Motion Sensor: Equipped with a polycrystalline silicon solar panel (5.5in x 3.3in) with up to 22% energy conversion rate. Charges in 4-6 hours, providing 8-10 hours of illumination from an 1800mAh battery. Features an automatic dusk-to-dawn sensor and a motion sensor with a 3-7 meter sensing distance.
- Super Bright LED Beads & Wide Lighting Area: Each light unit contains 292 high-brightness LED beads, delivering 4000 lumens of 6500K cool white light. The 120-degree sensor angle provides approximately 30 square meters of lighting coverage.
- 3 Lighting Modes & Remote Control: Offers three distinct lighting modes selectable via button or remote control.
- Separated Solar Panel & Flexible Use: The solar panel can be installed independently from the light unit, connected by a 16.4ft (5m) cable, allowing for optimal sun exposure.
- IP65 जलरोधक: Constructed from high-quality ABS and PC materials, ensuring durability and resistance to various weather conditions including rain, snow, and heat.
5. घटक संपलेview
The TOBUSA Solar Outdoor Motion Sensor Flood Light system consists of the following main components:
- प्रकाश एकक: Contains 292 LED beads, motion sensor, and internal battery. Dimensions: 7.8"L x 3.8"W x 1.6"H.
- सौर पॅनेल: Polycrystalline silicon panel for charging the light unit. Connected via a 16.4ft cable. Dimensions: 5.5"L x 3.3"W.
- रिमोट कंट्रोल: Used to select lighting modes and power the light on/off.
- माउंटिंग हार्डवेअर: Screws and anchors for secure installation.
प्रतिमा: ओव्हरview of the TOBUSA Solar Outdoor Motion Sensor Flood Lights, showing two light units, two solar panels with 5-meter cables, and two remote controls.
Image: Illustration of the separate design, highlighting the 16.4ft cable for flexible placement of the solar panel and light. It also shows the 180-degree rotatable heads for both the light and solar panel, along with options for button and remote control.
6. स्थापना
योग्य स्थापनेसाठी या चरणांचे अनुसरण करा:
- प्रकाश सक्रिय करा: Before installation, locate the power button on the back of the light unit and press it to turn on the light.
- Install Mounting Plates: Choose suitable locations for both the solar panel and the light unit. Use the provided screws and anchors to securely install the mounting plates.
- कंस स्थापित करा: Attach the brackets to the light unit and solar panel using the included screws.
- माउंट सोलर पॅनेल: Insert the solar panel onto its installed mounting plate. Adjust its angle to face direct sunlight.
- Mount Solar Light: Insert the solar light unit onto its installed mounting plate. Adjust its angle to cover the desired lighting area.
- केबल कनेक्ट करा: Connect the 16.4ft (5m) cable from the solar panel to the light unit. Ensure a secure connection.
- मोड निवडा: Once installed, use the remote control or the button on the light to select your preferred operating mode.
Image: Visual guide demonstrating the six steps for installing the solar light system, from pressing the power button to connecting the cable and completing the setup.
7. ऑपरेशन
The TOBUSA Solar Outdoor Motion Sensor Flood Lights offer three distinct operating modes, controllable via the included remote or the button on the light unit.
7.1. प्रकाश मोड
- Mode 1 (Strong Light Mode): The light remains OFF until motion is detected. Upon detection, it illuminates at 100% brightness for 20 seconds, then turns OFF if no further motion is detected.
- Mode 2 (Dim Light Mode): The light stays ON at 10% brightness. When motion is detected, it brightens to 100% for 20 seconds, then returns to 10% brightness if no further motion is detected.
- Mode 3 (Stay On Mode): The light remains ON continuously at 30% brightness throughout the night, without motion sensor activation.
Image: Diagram illustrating the behavior of the light in each of the three available operating modes, showing brightness levels and motion sensor interaction.
7.2. रिमोट कंट्रोल
The included remote control allows you to easily switch between modes and power the light. Ensure the light unit's main power button is pressed before using the remote.
प्रतिमा: क्लोज-अप view of the physical button located on the back of the solar light unit, which must be pressed to activate the light before remote control functionality is available.
8. चार्जिंग
The solar panel charges the internal battery during daylight hours. For optimal performance, ensure the solar panel is placed in a location that receives maximum direct sunlight.
- चार्जिंग वेळ: Approximately 4-6 hours of direct sunlight for a full charge.
- ऑपरेटिंग वेळ: A full charge can provide 8-10 hours of illumination, depending on the selected mode and motion detection frequency.
- शुल्क सूचक: A red light indicates charging, and a green light indicates a full charge.
Image: Visual explanation of the solar charging process, showing the solar panel absorbing sunlight during the day and the light unit automatically activating at night, powered by its rechargeable battery.
9. देखभाल
- स्वच्छता: नियमितपणे सौर पॅनेल सॉफ्ट, डी ने पुसून टाका.amp सूर्यप्रकाशात अडथळा आणणारे आणि चार्जिंग कार्यक्षमता कमी करणारे धूळ, घाण किंवा मोडतोड काढण्यासाठी कापड.
- तपासणी: Periodically check the cable connections and mounting hardware to ensure they remain secure.
- बॅटरी: The internal battery is designed for long-term use. Do not attempt to replace it yourself.
10. समस्या निवारण
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| रात्री लाईट चालू होत नाही. | Insufficient solar charge; Light not activated; Sensor obstructed. | Ensure solar panel receives direct sunlight for 4-6 hours. Press the power button on the light unit. Clear any obstructions from the light sensor. |
| Light stays dim or turns off quickly. | Low battery charge; Incorrect mode selected. | Allow more time for solar charging. Select a different mode using the remote or button. |
| मोशन सेन्सर काम करत नाही. | Light in Mode 3; Sensor obstructed; Sensing distance too far. | Switch to Mode 1 or Mode 2. Clear obstructions from the sensor. Ensure motion occurs within 3-7 meters. |
| रिमोट कंट्रोल प्रतिसाद देत नाही. | Light not activated; Remote battery low. | Press the power button on the light unit first. Replace remote control batteries if necessary. |
11. तपशील
| वैशिष्ट्य | तपशील |
|---|---|
| ब्रँड | टोबुसा |
| मॉडेलचे नाव | YC-SW2881-2 |
| प्रकाश स्रोत प्रकार | एलईडी (९ मणी) |
| चमक | 4000 लुमेन |
| रंग तापमान | ४१०० केल्विन (थंड पांढरा) |
| उर्जा स्त्रोत | सौरऊर्जेवर चालणारी |
| बॅटरी क्षमता | 1800mAh (included) |
| सौर पॅनेलची कार्यक्षमता | 22% पर्यंत रूपांतरण दर |
| मोशन सेन्सर श्रेणी | 3-7 मीटर |
| मोशन सेन्सर अँगल | 120 अंश |
| प्रकाश क्षेत्र | Approx. 30 sq meters |
| Cable Length (Solar Panel to Light) | 16.4 फूट (5 मीटर) |
| पाणी प्रतिकार पातळी | IP65 जलरोधक |
| साहित्य | ABS आणि PC |
| उत्पादनाचे परिमाण (हलके युनिट) | ११"ले x ४"प x १३"ह |
| आयटम वजन | १.२ पौंड (प्रति युनिट) |
| समाविष्ट घटक | Solar Lights, Instruction Manual, Solar Panel, Remote |
12. हमी आणि समर्थन
This product comes with a Limited Warranty. For specific warranty details or technical support, please refer to the TOBUSA brand store or contact customer service.
Visit the official TOBUSA store for more information: TOBUSA Store