HPE ProLiant DL380 Gen10 2U Rack Server Instruction Manual

1. परिचय

The HPE ProLiant DL380 Gen10 2U Rack Server is engineered for superior performance, reliability, and manageability in enterprise-level workloads and applications. Featuring powerful Xeon processors and DDR4 memory, this server is designed to handle demanding tasks such as database applications, virtualizations, and large-scale simultaneous applications. Its robust design includes hot-swappable power supplies to ensure continuous operation of critical applications.

This manual provides essential information for the safe and efficient setup, operation, and maintenance of your HPE ProLiant DL380 Gen10 server.

2. सुरक्षितता माहिती

• कोणतीही देखभाल किंवा स्थापना प्रक्रिया करण्यापूर्वी नेहमी वीज खंडित करा.
• विद्युत शॉक टाळण्यासाठी योग्य ग्राउंडिंगची खात्री करा.
• Do not operate the server with covers removed unless specifically instructed for maintenance or troubleshooting.
• Install the server in a well-ventilated area to prevent overheating.
• Use appropriate lifting techniques when handling the server due to its weight.

3. पॅकेज सामग्री

तुमच्या पॅकेजमध्ये सर्व घटक आहेत का ते तपासा:

• HPE ProLiant DL380 Gen10 2U Rack Server
• Rail Kit for rack installation
• Power Cords (for redundant power supplies)
• दस्तऐवजीकरण (या मॅन्युअलसह)

Note: Hard drives and memory upgrades are included separately and require installation. They are not pre-installed in the server.

4. सेटअप

4.1. रॅक स्थापना

The HPE ProLiant DL380 Gen10 server is designed for 2U rack mounting. Use the provided rail kit for secure installation.

Figure 4.1: HPE ProLiant DL380 Gen10 Rail Kit. This image shows the two metal rails used for mounting the server into a standard server rack.

1. Attach the inner rails to the sides of the server.
2. Mount the outer rails to the rack posts, ensuring they are level and aligned.
3. Slide the server into the rack until it locks into place.
4. Secure the server to the rack using the provided screws.

4.2. Component Installation (Hard Drives and Memory)

Hard drives and memory modules are not pre-installed and must be added before initial power-on.

आकृती 4.2: अंतर्गत view of the HPE ProLiant DL380 Gen10 server, showing the layout of components including CPU sockets, memory slots, and drive bays.

4.2.1. हार्ड ड्राइव्ह स्थापना

The server supports 7.68TB (4 x 1.92TB) Enterprise 2.5” SATA III 6Gb/s SSDs. Locate the front drive bays.

आकृती 4.3: समोर view of the HPE ProLiant DL380 Gen10 server, displaying the accessible drive bays for storage installation.

1. Open the drive bay latches.
2. Insert each SSD into an available drive bay until it clicks into place.
3. Close the drive bay latches.

३.४. मेमरी इन्स्टॉलेशन

The server is equipped with 256GB (8 x 32GB) DDR4 PC4-25600 3200MHz Unbuffered Memory. Refer to the server's internal diagram for correct DIMM slot population order.

1. मदरबोर्डवर मेमरी स्लॉट शोधा.
2. Open the retaining clips on each end of the memory slot.
3. Align the memory module with the slot key and press firmly until the clips snap into place.

4.3. वीज जोडणी

The server features redundant power supplies for enhanced reliability.

आकृती 4.4: मागील view of the HPE ProLiant DL380 Gen10 server, showing the redundant power supply units and network ports.

1. Connect the power cords to both power supply units at the rear of the server.
2. Plug the other end of the power cords into separate, grounded power outlets or a UPS.

4.4. नेटवर्क कनेक्शन

The server includes a Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3 Network Controller.

1. Connect Ethernet cables from your network infrastructure to the network ports on the rear of the server.

4.5. Initial Boot and iLO Setup

The server utilizes HPE ProLiant Integrated Lights Out (iLO) 5 for remote management.

1. सर्व्हरवर पॉवर.
2. During boot, access the iLO setup utility (usually by pressing F8 or F9, refer to on-screen prompts).
3. Configure network settings for iLO and set a secure password.

४.२. ऑपरेटिंग सिस्टमची स्थापना

The server supports Windows Server or Linux operating systems.

1. Insert your OS installation media (USB or network boot).
2. ऑपरेटिंग सिस्टम स्थापित करण्यासाठी ऑन-स्क्रीन सूचनांचे अनुसरण करा.
3. Install all necessary drivers and updates for optimal performance.

5. ऑपरेटिंग सूचना

5.1. मूलभूत ऑपरेशन

Once the operating system is installed and configured, the server is ready for use. Manage the server directly via a connected monitor, keyboard, and mouse, or remotely via iLO.

5.2. Remote Management with iLO 5

HPE iLO 5 provides comprehensive remote management capabilities, allowing you to monitor server health, perform power operations, and access the server console from any location with network access.

• Access iLO via a web browser using its configured IP address.
• Log in with your credentials to access the iLO dashboard.
• Utilize features such as remote console, virtual media, and power control.

5.3. RAID कॉन्फिगरेशन

The server includes a P408i-a/2GB with Smart Storage Battery for RAID configuration. This controller manages your SSD storage for data protection and performance.

1. During server boot, access the RAID controller utility (refer to on-screen prompts for the specific key).
2. Create desired RAID arrays (e.g., RAID 0, 1, 5, 6, 10) using your installed SSDs.
3. Ensure proper logical drive configuration for your operating system and applications.

5.4. पॉवर व्यवस्थापन

The redundant power supply system ensures continuous operation even if one power supply fails. Monitor power supply status via iLO or the server's front panel indicators.

6. देखभाल

6.1. Hot-Swappable Components

The server's hot-swappable power supplies allow for replacement without powering down the server, minimizing downtime.

• To replace a faulty power supply, identify the failed unit via iLO or indicator lights.
• Unplug the power cord from the faulty unit.
• Release the latch and slide out the power supply.
• Insert the new power supply until it locks into place and connect its power cord.

११. फर्मवेअर आणि सॉफ्टवेअर अपडेट्स

Regularly update server firmware (BIOS, iLO, RAID controller) and operating system software to ensure optimal performance, security, and compatibility.

• Visit the Hewlett Packard Enterprise support website for the latest updates for your DL380 Gen10 model.
• Follow the provided instructions for each update carefully.

6.3. Cleaning and Environmental Control

• Keep the server environment clean and free of dust.
• Ensure proper airflow around and through the server.
• Periodically inspect and clean air filters if present.

7. समस्या निवारण

This section provides general troubleshooting steps for common server issues.

7.1. Server Not Powering On

• Verify that power cords are securely connected to both the server and the power source.
• Check power supply indicator lights for any error states.
• वीज स्रोत सक्रिय असल्याची खात्री करा.

7.2. No Video Output

• मॉनिटर कनेक्ट केलेला आणि चालू असल्याची खात्री करा.
• व्हिडिओ केबल कनेक्शन तपासा.
• Access iLO remote console to verify server boot progress.

7.3. Operating System Not Loading

• Verify boot order in BIOS settings.
• Check RAID array status in the RAID controller utility.
• Run diagnostic tools available through iLO or bootable media.

२. नेटवर्क कनेक्टिव्हिटी समस्या

• Check network cable connections and link lights on the network ports.
• Verify network configuration in the operating system.
• Ensure network drivers are correctly installed and updated.

8. तपशील

Below are the detailed specifications for the HPE ProLiant DL380 Gen10 server:

9. हमी आणि समर्थन

For warranty information, technical support, and additional resources, please visit the official Hewlett Packard Enterprise website or contact your authorized HPE reseller. Keep your product's serial number and purchase date readily available when seeking support.