वापरकर्ता मॅन्युअल

1. परिचय

खरेदी केल्याबद्दल धन्यवाद.asing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.

आकृती 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.

2. महत्वाची सुरक्षितता माहिती

इशारा: इलेक्ट्रिक शॉकचा धोका. इंस्टॉलेशन किंवा सर्व्हिसिंग करण्यापूर्वी फ्यूज बॉक्स किंवा सर्किट ब्रेकरमधील वीज खंडित करा.

• स्थापना सुरू करण्यापूर्वी सर्व सूचना काळजीपूर्वक वाचा.
• सर्व विद्युत कनेक्शन स्थानिक कोड, अध्यादेश किंवा राष्ट्रीय विद्युत संहिता (NEC) नुसार असले पाहिजेत. जर तुम्हाला योग्य विद्युत वायरिंग कनेक्शनची माहिती नसेल तर पात्र इलेक्ट्रिशियनचा सल्ला घ्या.
• Use only UL-listed wire connectors for the electrical connections.
• जास्तीत जास्त वॅट ओलांडू नकाtage specified for this fixture (14 Watts per bulb).
• Wear safety glasses and appropriate protective gear during installation.
• फिक्स्चर योग्यरित्या ग्राउंड असल्याची खात्री करा.

3. पॅकेज सामग्री

स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा:

• 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
• माउंटिंग हार्डवेअर (स्क्रू, वायर नट्स, माउंटिंग ब्रॅकेट)
• Note: Light bulbs are NOT included.

4. तपशील

5. सेटअप आणि स्थापना

आवश्यक साधने: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

प्री-इंस्टॉलेशन पायऱ्या:

1. वीज बंद करा: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
2. क्षेत्र तयार करा: Clear the work area and ensure you have stable footing if using a ladder.
3. अनपॅक करा: पॅकेजिंगमधून फिक्स्चर आणि सर्व घटक काळजीपूर्वक काढून टाका.

स्थापना चरण:

1. माउंटिंग ब्रॅकेट जोडा: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. विद्युत तारा जोडा:
   • कनेक्ट करा काळा (hot) wire from the ceiling to the काळा wire of the fixture using a wire nut.
   • कनेक्ट करा पांढरा (neutral) wire from the ceiling to the पांढरा wire of the fixture using a wire nut.
   • कनेक्ट करा जमीन wire (bare copper or green) from the ceiling to the जमीन wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
   Ensure all connections are tight and secure. Wrap electrical tape around wire nuts for added insulation.
3. Secure Fixture to Mounting Bracket: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
4. लाइट बल्ब स्थापित करा: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
5. काचेची सावली जोडा: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
6. पुनर्संचयित शक्ती: एकदा इंस्टॉलेशन पूर्ण झाले आणि सर्व कनेक्शन सुरक्षित झाले की, सर्किट ब्रेकरवर वीज पूर्ववत करा.

6. ऑपरेटिंग सूचना

Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.

7. काळजी आणि देखभाल

Regular cleaning will help maintain the appearance and performance of your light fixtures.

• फिक्स्चर साफ करणे: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
• Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
• बल्ब बदलणे: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage आणि बेस प्रकार.
• Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.

8. समस्या निवारण

जर तुम्हाला तुमच्या लाईट फिक्स्चरमध्ये समस्या येत असतील, तर खालील सामान्य समस्या आणि उपाय पहा:

• प्रकाश चालू होत नाही:
  • Check that the power supply is on at the circuit breaker.
  • Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
  • Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
• प्रकाश चमकतो:
  • Ensure the light bulbs are fully tightened in their sockets.
  • Check for any loose wire connections within the fixture or junction box.
  • Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
• Glass shade is loose or wobbles:
  • Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.

If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.

७. वॉरंटी आणि ग्राहक समर्थन

For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official webसाइट किंवा तुमच्या उत्पादन पॅकेजिंगमध्ये दिलेली संपर्क माहिती. सपोर्टशी संपर्क साधताना कृपया तुमचा मॉडेल नंबर (४२६१) आणि खरेदी तपशील तयार ठेवा.