Foset CALE-6I Instantaneous Water Heater User Manual

1. परिचय

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Foset CALE-6I Instantaneous Water Heater. Please read these instructions carefully before use and retain them for future reference. This water heater is designed to provide hot water on demand for a single service point, utilizing LP gas.

समोर view of the Foset CALE-6I Instantaneous Water Heater.

2. प्रमुख वैशिष्ट्ये

• Instantaneous Heating: Provides hot water on demand without a storage tank, eliminating waiting times.
• ऊर्जा कार्यक्षम: Saves up to 70% on gas consumption compared to traditional tank water heaters.
• स्वयंचलित प्रज्वलन: Activates automatically when a hot water tap is opened.
• इलेक्ट्रॉनिक प्रज्वलन: Powered by two D-type batteries, eliminating the need for a constant pilot flame.
• डिजिटल तापमान प्रदर्शन: Shows the current water temperature for precise control.
• Dual Safety System: Equipped with mechanisms to prevent gas leaks and overheating.
• Low Pressure Operation: Functions effectively with a minimum operating pressure of 0.25 kgf/cm².
• कॉम्पॅक्ट डिझाइन: Lightweight and small footprint for flexible installation.
• Constant Flow: Delivers a steady flow of hot water up to 70°C.

एक अंतर्गत view of the instantaneous water heater, detailing its tankless design, copper heat exchanger coil, and high-power burner. Key benefits such as up to 70% gas savings, low-pressure operation capability, and a capacity of 6 liters per minute for one service are also highlighted.

3. घटक संपलेview

Familiarize yourself with the main components of your water heater:

This image shows the front of the Foset CALE-6I instantaneous water heater, highlighting its main external components: the chimney for exhaust, the control knob for adjusting settings, and the digital display for temperature indication.

• चिमणी: Exhaust vent for combustion gases.
• नियंत्रण घुंडी: Used to adjust gas flow and water temperature.
• डिजिटल प्रदर्शनः सध्याचे पाण्याचे तापमान दाखवते.
• पाण्याचा प्रवेश/बाहेरचा मार्ग: Connections for cold water input and hot water output.
• गॅस इनलेट: Connection for LP gas supply.
• बॅटरी कंपार्टमेंट: Houses two D-type batteries for electronic ignition.

4. सेटअप आणि स्थापना

WARNING: Installation must be performed by a qualified professional in accordance with local codes and regulations. Improper installation can lead to gas leaks, fire, or carbon monoxide poisoning.

4.1 स्थान आवश्यकता

• हवेशीर क्षेत्रात बसवा.
• देखभाल आणि योग्य वायुवीजनासाठी युनिटभोवती पुरेसा मोकळापणा सुनिश्चित करा.
• Mount on a solid, vertical surface capable of supporting the unit's weight.
• Protect from freezing temperatures.

4.2 गॅस कनेक्शन

• Connect the water heater to an LP gas supply.
• Use appropriate gas lines and fittings.
• Check all gas connections for leaks using a soapy water solution.

4.3 पाणी कनेक्शन

• Connect the cold water inlet to your main water supply.
• Connect the hot water outlet to the hot water distribution system for your single service point.
• गळती रोखण्यासाठी सर्व पाण्याचे कनेक्शन घट्ट असल्याची खात्री करा.

4.4 बॅटरी इंस्टॉलेशन

• बॅटरी कंपार्टमेंट उघडा.
• Insert two D-type batteries, ensuring correct polarity.
• डबा सुरक्षितपणे बंद करा.

5. ऑपरेटिंग सूचना

5.1.१.१ आरंभिक प्रारंभ

1. Ensure gas and water supplies are open.
2. Open a hot water tap at the service point. The water heater will automatically ignite.
3. Observe the digital display for temperature readings.

5.2 तापमान समायोजन

• Use the control knob on the front panel to adjust the desired water temperature.
• Turn the knob clockwise to increase temperature and counter-clockwise to decrease it.
• The digital display will show the adjusted temperature.

5.3 बंद करणे

• Close the hot water tap. The water heater will automatically turn off.
• For extended periods of non-use, it is recommended to close the main gas and water supply valves.

6. देखभाल

नियमित देखभालीमुळे तुमच्या वॉटर हीटरची कार्यक्षमता आणि दीर्घायुष्य सुनिश्चित होते.

6.1 स्वच्छता

• बाहेरील बाजूस मऊ, डीamp कापड अपघर्षक क्लीनर वापरू नका.
• Periodically check the exhaust vent (chimney) for obstructions.

6.2 बॅटरी बदलणे

• If the digital display fades or the unit fails to ignite, replace the D-type batteries.
• नवीन बॅटरी घालताना योग्य ध्रुवीयता सुनिश्चित करा.

६.४ व्यावसायिक तपासणी

• It is recommended to have the water heater inspected by a qualified technician annually.
• This includes checking gas connections, burner operation, and heat exchanger condition.

7. समस्या निवारण

सेवेसाठी कॉल करण्यापूर्वी, खालील सामान्य समस्या तपासा:

If problems persist, contact a qualified technician for assistance.

8. तपशील

This diagram illustrates the physical dimensions of the Foset CALE-6I water heater, showing its height of 44 cm, width of 30 cm, and depth of 13 cm, which are important for installation planning. (Note: Dimensions in image may vary slightly from detailed specifications.)

9. वॉरंटी माहिती

Foset products are manufactured under strict quality standards. This product comes with a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty are typically provided with the product packaging or can be found on the official Foset webसाइट. कृपया वॉरंटी दाव्यांसाठी तुमचा खरेदीचा पुरावा जपून ठेवा.

For warranty service, please contact Foset customer support or the authorized dealer from whom you purchased the product.

10. ग्राहक समर्थन

If you have any questions, require technical assistance, or need to report an issue, please contact Foset customer support:

• Webसाइट: अधिकाऱ्याला भेट द्या Foset store on Amazon or the main Foset corporate website for more information and contact details.
• सेवा केंद्रे: Refer to your product packaging or the Foset webअधिकृत सेवा केंद्रांच्या यादीसाठी साइट.

When contacting support, please have your product model number (CALE-6I) and proof of purchase readily available.