mpow logo

MPOW BH453A Bluetooth Headphone

MPOW BH453A Bluetooth Headphone product image

Package

  • Headset
    MPOW BH453A Bluetooth Headphone packing 1
  • Micro USB Cabla
    MPOW BH453A Bluetooth Headphone packing 2
  • Instruction Guide
    MPOW BH453A Bluetooth Headphone packing 3

Specification

  • Stand ~ Time : About 200 hours
  • Charging Time : 2 hours
  • Charging Input : 5V::-::120mA
  • Talking Time : Ab:l ut 16 hours
  • Headset Battery capacity : 3.7\/ ::-::1aomAh

Function Button

MPOW BH453A Bluetooth Headphone  function button

Charging

MPOW BH453A Bluetooth Headphone charging

Connection With Two Devices

MPOW BH453A Bluetooth Headphone connect to device

  1. Pair with you first device.
  2. Tum of the Bluetooth of the first  device.
  3. Long press he. diet to enter into pairing mode and pair with, our second de/ice. the blue light will flash slowly after successlly connected
  4. Tum on the Bluetooth of the first d8’Jica, and manually connect “MPCW • in
    the paired list After the OOl’Y7ection is sua:essti.11.i,cur headset is connected to the ‘MO Bluetooth devices at the same time (If the first device is the 105. then :PJ need to manually connect if it is Android. it ran be automatically connected.)

call/Music Setting on PC

  1. If you want to listen calls on system with this headset please follow the steps below and make sure you have to the  connected headset successfully.
    after  paring the headset to your PC. enter the  Control Panel  set Bluetooth Hands-fiee Al.dloasthe delil.Jlt<‘lldio de,1ee set Bluetooth Audio Input Device as the default microphonic. tice Once the default device has be been set oofl’eCtly, please confirm that the dl!allt d~ of the calling software has been seen set connected  (if there is no 50Und further fast time too. double device the MFB to act me with the
  2.  lf want to lisen to music on With this headset, please follow the steps bellow and make sure connected to the headset successfully.
    After paring the headset to PC. enter the Control Panel — Sound -Set Bluets, the Audio Renderer as the default audio device Set Bluets, the Audio lnr,.,t: DeJirn as the default  microphone device
Q&A

1. How to pair if failed ?
In standby mode , hold the MFB and Volume+ button Simultaneously fur 5s TD clear the pairing record. Then long press the MFB until blue and red indicator light flashes alternative  pair again

2.Any  Password Needed when Paring?
lf needed please try 0000 or 8888, 7111. 7 234

3.How can I change my headset?
You can charge lt via the USB cable.

4. How to restart the headset  if Failed?
Try to charge it ‘Jia USB cable and then restart it

Warranty Information

Warranty & Support: Mpow offers 45-day money back & 24-month worry-free guarantee.
After-service Email: [email protected]
Mpow Customer Service Phone: 1-844-869-3583

FCC STATEMENT

Any Changes or modifications not expressly approed by the party responsible for compliance could void the user’s authority to operate the equipment This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference and
  2. This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This transmitter must not be coylocated or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rues These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Documents / Resources

MPOW BH453A Bluetooth Headphone [pdf] User Manual
BH453A, 2AMH2-BH453A, 2AMH2BH453A, BH453A Bluetooth Headphone, BH453A, Bluetooth Headphone

Leave a comment

Your email address will not be published.