MOZA FMP18 Panel Bundle User Guide

MOZA FMP18 Panel Bundle

Preface

Thank you for purchasing our product. This manual provides important information about the product’s features, safety instructions, and usage guidelines. Please read this manual carefully before using the product to ensure safe and proper operation. Keep this manual for future reference. If you have any questions or need further assistance, please visit our customer support page: https://www.alza.cz/contact-and-support
Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Specifications

Component Dimensions

• DDI (Direct Digital Indicator): 167.05 mm (Width) x 182.95 mm (Height)
• FPP (Flight Control Panel): 194.86 mm (Width) x 306.71 mm (Height)
• AMPCD (Armament Control Panel): 167.05 mm (Width) x 188.10 mm (Height)

Full Assembly Dimensions

• Total Width: 527.17 mm
• Total Height: 455.40 mm
• Depth (excluding desk mount): 81.20 mm
• Desk Mount Depth: 211.45 mm

User Guide

1. Button Frame and Display Assembly
   The button frame and display panel connect via a magnetic attachment. Ensure the correct orientation by aligning the pogo pin connectors on the frame with the contact points on the display before allowing the magnetic attachment to snap securely into place.
2. Display Panels & Mounting Brackets Assembly
   Attach the mounting brackets to the rear of the display panels. Secure each bracket by tightening the M4 screws into the mounting holes using the included 3 mm Allen key.
3. Desk Mount Assembly
   Assemble the desk mounts using the M4 screws and the 3 mm Allen key. Next, attach the mounting bracket to the rear of the display panel and secure it with the M4 screws using the same Allen key.
4. Adjusting the Desk Mount Angle
   Loosen the adjustment screws on the side of the desk mount using the M8 spanner to adjust the angle. Once the desired angle is set, tighten the screws securely.

Mounting Options

Desk Mounting
Clamp the desk mount onto the edge of your desk and tighten the threaded rod to secure the device.

• Supported desk thickness: 10 to 70 mm.
• Note: Do not mount the device on fragile surfaces, such as glass.

Aluminium Profile Mounting

1. Insert T-nuts into the aluminium profile.
   Align the mounting holes on the bracket with the T-nuts, then secure the bracket by tightening the screws into the T-nuts.

Note: Aluminium profile mounting hardware (aluminium profiles, T-nuts, screws, corner brackets, etc.) is not included and must be purchased separately.

Connecting to a PC

Use the included USB cables to connect the components to your PC:

• Display Panels (DDI & AMPCD):
  • Use a USB-A to USB-A cable for each panel.
  • Connect one end to the panel and the other to your PC.
  • The screen brightness can be adjusted using the physical buttons located on the rear of each panel.
• FPP Module:
  • Use the USB-A to USB-C cable.
  • Connect the USB-C end to the FPP and the USB-A end to your PC.
    Once connected successfully:
  • The device indicator light will turn on.
  • The device will appear as connected in the MOZA Cockpit software.

Connection Layout Details

• Each display panel (left, right, and bottom) connects directly to the PC using its own USB-A to USB-A cable.
• The central FPP module connects to the PC via a USB-C to USB-A cable.
• Each display panel also features an auxiliary 5V USB-C power input port next to its main USB port for external power, if required.

Note:

• All USB-A ports are USB 3.0. Using USB 2.0 cables may cause a malfunction.
• If the device indicator light flashes continuously after powering on, this may indicate insufficient power. Use an additional 5V USB-C cable to provide external power to the display.
• If you are using a USB hub, an externally powered USB hub is recommended.

Software Overview

Main Page
Select FMP18 from the device list in the sidebar to access its dedicated settings interface.

Panel Settings
Within this interface, you can select individual panels and adjust their lighting effects, or choose a brightness control mode. The available modes include:

• Telemetry Mode: Brightness is linked to a selected telemetry parameter, enabling synchronised lighting with the in-game cockpit.
• Device Mode: Brightness is linked to device axis inputs, including axes from other MOZA Flight hardware.
• Manual Mode: Adjust the panel brightness directly through the software.

Screen Settings
In the Screen Settings menu, you can map each display to its physical mounting position. Once your FMP18 mounting layout is confirmed, assign the corresponding screen IDs and click
‘Apply’ to configure screen export automatically for all supported aircraft.

Precautions

• Do not expose the device to liquids or moisture, as this may cause a fire or an electric shock.
• Avoid using the device in direct sunlight.
• Do not use MOZA flight simulation equipment in conjunction with MOZA racing equipment. Recommended indoor operating temperature: 5 °C to 30 °C.
• For your safety and well-being, please monitor your gaming time and take regular breaks. The device is not suitable for children under 6 years of age, as small accessories may pose a choking hazard.
• Children under 13 years of age must be supervised by an adult.
• Do not attempt to disassemble the equipment yourself; doing so will void the warranty. The equipment must be connected using the factory-supplied power supply to ensure electrical safety and protect your consumer rights.
• To ensure user safety, any repair or replacement of parts must only be carried out by an officially authorised service centre.
• The use of non-standard power supplies is strictly prohibited, even if the voltage and other technical specifications appear to match.
• Use only AC power from a standard wall outlet to prevent damage to the product.
• Do not expose the device to heat sources.
• Unplug the power cable if the device is to be left unused for an extended period.
• If you detect any abnormality, stop using the device immediately and contact MOZA customer support or an authorised service centre.
• Please visit our official website and social media channels for the latest product updates.

Warranty Conditions

Warranty policies may vary by country or region. For specific details such as the warranty period and coverage, please refer to the after-sales policy provided by the sales channel from which you purchased the product. If you need to request after-sales service, please contact the sales channel or authorized dealer where the product was purchased. Be sure to provide valid proof of purchase, such as an invoice or order number, to confirm your eligibility for service.

EU Declaration of Conformity

This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.

Waste from Electrical and Electronic Equipment (WEEE)

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19/EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.