Categories: Moza

MOZA AirCross 3 Handheld Gimbal Stabilizer User Manual

3 Handheld Gimbal Stabilizer
User Manual

MOZA AirCross 3 Overview

1. Tilt Motor Lock 9. Quick Release Baseplate Knob
2. Extension Port 10. Roll Knob
3. Quick Release Plate 11. Roll Motor Lock
4. Tilt Adjustment Slider 12. Pan Knob
5. Pan Motor Lock 13. USB-C Charging Port
6. Foldable Safety Lock 14. Battery Indicator Light
7. Smart Trigger 15. Power Button
8. Quick Release Plate Knob

16. OLED Screen 21. Tilt Knob
17. Joystick 22. Foldable Knob
18. 1/4’’ Extension Port 23. Camera Control Button
19. Camera Control Port 24. Function Button
20. AI Extension Port

Preparation

Unfold the Gimbal

  1. Rotate the foldable Knob;
  2. Unfold the handle until it is locked.
  3. Tighten the knob to prevent the handle from loosening.

Attaching the Tripod

  1. Screw the mini tripod into the screw hole at the bottom of the handle.
  2. Expand the mini tripod

Battery Charging
Please charge the battery through the USB-C charging port using a USB-C cable (Included) and a USB adapter (Not included). It is recommended to use a USB
adapter with QC2.0 or PD protocol to complete the charging quickly. The LED light below the charging port will switch off after the charging is completed.

Unlock the Gimbal
Rotate the motor lock to the unlocked position, and then each motor can rotate freely.

Note: Do not rotate the motor before unlocking, otherwise the motor lock may be damaged. If the gimbal is turned on before unlocking, the gimbal will enter sleep mode.

Mounting the Camera

Make sure to prepare the camera before mounting, confirm the battery is fully charged and a memory card with sufficient storage space is inserted.

  1. Place the camera on the quick release plate with 1/4” or 3/8” screws and keep the camera in the center. Remove the extra screws as a spare.
  2. Slide the quick release plate onto the baseplate to the locked position.
  3. Secure the quick release plate and tighten the knob, make sure the quick release plate is locked.

Note:
a. When installing the camera, if the right side of the camera interferes with the tilt arm causing the installation to fail, loosen the knob of the quick-release baseplate and move it to the left until
the camera can be installed successfully.
b. After the camera is installed, move the quick-release baseplate to the right and make sure the camera’s right side is aligned with the tilt arm to achieve the best stability.

Balance Adjustment

  1. Balancing the tilt axis vertical
    a. Rotate the camera so that the lens is pointing upward
    b. Unlock the tilt axis and loosen the knob, slightly adjusting the position of the tilt adjustment slider.
    c. The balancing is completed when the camera is steady while pointing upward, lock the tilt axis.
  2. Balancing the tilt axis horizontal
    a. Rotate the camera so that the lens is pointing forward;
    b. Unlock the quick release plate, slightly adjust the position of the plate;
    c. The balancing is completed when the camera is steady while pointing forward, lock the quick release plate.
  3. Balancing the Roll Axis
    a. Unlock the Roll axis.
    b. Slightly adjust the roll arm left and right until it’s completely horizontal.
    c. Lock the roll axis.
  4. Balancing the Pan Axis
    a. Hold the gimbal at an angle of 45° horizontally, turn the pan arm to a horizontal angle.
    b. Unlock the Pan axis and slightly adjust the pan arm left and right.
    c. The Pan axis is balanced when the camera is steady, lock the pan axis.

Operation

Power Button
Long Press: Power on or off
One-Click: Switch the following speed, 5 levels from slow to fast
Double-click: Enter or exit sleep mode.
Joystick
Control the rotation of the gimbal Menu:
Top Button: Option-up
Down Button: Option-down
Left Button: Return
Right Button: Confirm

Camera Control Button
Press halfway: Autofocus
One-click: Start recording
Press and hold for 3 seconds: take a photo
Function Button:
One-Click: Follow mode(Pan-Tilt Follow, All Lock)
Double Click: Sports Gear Mode
Triple Click: Inception Mode
Long Press: Enter/Exit Menu
Trigger Button
One-Click: Start/Stop AI Follow Mode
Double Click: Re-center
Triple Click: Selfie Mode
Press and Hold: All Lock
One-Click and Hold: Pan-tilt Follow

Advanced Features
Please visit www.gudsen.com for the complete user manual. It will guide you:

  • Language Switch
  • Camera Control
  • Button Customization
  • Motor Output
  • FPV, Sports Gear Mode, Manual Positioning
  • User Configuration
  • Calibration and Firmware Updates

MOZA Master App
Scan the code or search in the app store to download the MOZA Master App. MOZA Master provides functions like Virtual Joystick Control, Motion Sensing Control, Parameter settings, Time-Lapse, Panorama, Calibration, and Firmware Updates.

Specifications

Model: AirCross 3
Weight: 1.3kg without a tripod
Dimension: Unfold: 170*190*310mm,
folded: 52*225*270mm
Battery Type: Li-ion Intelligent Battery(built-in), 24.718Wh
Battery Capacity: 3400mAh
Standard Voltage: 7.27V
Charging Voltage: 5V/2A, 9V/2A
Working hours: 20H
Fast-charging time: 1.4H
Bluetooth: BT5.0,2.400 GHz -2.4835 GHz
Environmental requirements: (W*D*H)
Working temperature: -10 ℃ -50 ℃;
Charging temperature: 5 ℃-40 ℃

Safety Caution

  1. This product is powered by a built-in battery; please do not disassemble it, do not put it into liquid or fire in order to avoid damage or risk of injury.
  2. Before powering on the gimbal, please adjust the balance following the instructions in this document. If the gimbal works in an unbalanced state for a long time, the surface temperature of the motor can get hot, which will seriously shorten the battery life.
  3. Do not let children touch and use this product, do not use fingers to obstruct the motor operation to avoid finger injury.
  4. This product is not waterproof or dustproof; please keep the gimbal clear of dust and water to avoid damage.

http://weixin.qq.com/r/I3UUDB-E70KQrVtv9yAx
http://l.ead.me/baxQX4

Shenzhen Gudsen Technology Co., Ltd
Web: www.gudsen.com

Documents / Resources

MOZA AirCross 3 Handheld Gimbal Stabilizer [pdf] User Manual
AirCross 3 Handheld Gimbal Stabilizer, AirCross 3, Handheld Gimbal Stabilizer
Share

Recent Posts

Novlistve 880788509328 Wireless Earbuds Bluetooth Headphones

Novlistve 880788509328 Wireless Earbuds Bluetooth Headphones SPECIFICATION BRAND Novlistve MODEL NAME 880788509328 COLOR White FORM…

43 mins ago

NEC NP-M322W Smart Digital Projector User’s Manual

NEC NP-M322W Smart Digital Projector

48 mins ago

SOLAX 0148083 BMS Parallel Box-II for Parallel Connection of 2 Battery Strings Installation Guide

0148083 BMS Parallel Box-II for Parallel Connection of 2 Battery Strings Quick Installation Guide ----…

1 hour ago

Otium E8 Bluetooth Wireless Earbuds

Otium E8 Bluetooth Wireless Earbuds SPECIFICATION BRAND Otium MODEL NUMBER E8 COLOR White EAR PLACEMENT…

2 hours ago

LEDVANCE G11151664 Emergency Conversion Box Instruction Manual

G11151664 Emergency Conversion Box EMERGENCY CONVERSION BOX EAN l x w x h [mm] W…

2 hours ago

Mellerware Homy Fan Heater Instruction Manual

Mellerware Homy Fan Heater Instruction Manual Introduction This product is only suitable for well insulated…

2 hours ago