Monster Clarity 102(200) Airlinks true wireless bluetooth headset
Monster Clarity 102200 Airlinks

Product specification

Product number : Monster Clarity 102 Airlinks
Drive unit : 6mm moving coil
Bluetooth Version : 5.0
Waterproof coefficient : IPX5
Audio decoding : SBC、AAC
Charging performance of the charging compartment : DC 5.0V
Endurance : About 6 hours
The number of times the charging compartment recharges the headset : About 4th
Charging Time : Approximately 1.5 hours for earphones, 1 hour for charging box
Weight : 56g

Instructions

Bluetooth pairing

1. Take out the left and right earphones at the same time
2. When you hear the “pairing” prompt (the blue indicator light flashes), turn on the Bluetooth of the device you want to connect and connect. Monster Clarity 102 Airlinks”
3. If the connection is successful, you will hear the “connected” prompt (the blue indicator flashes once in 6 seconds)
4. Single ear mode: no need to re-pair

Reset method

1. Please delete the Bluetooth connection record on the phone first
2. First take out the left and right earphones from the charging box, when the power is off, press and hold the left and right earphones for 8 seconds at the same time until a purple light appears Lift up, then let go, and don’t operate the buttons again. Wait for the left and right earphones to be paired automatically, until the left ear light turns off, and the right Ear white and red lights flash alternately.

Instructions

1. Switch on/off: Take out/put back the charging box
2. Adjust the volume level: tap the left ear 2 times (down)/right ear 2 times (up)
3. Switch tracks: Tap and hold the left ear for 2 seconds (top)/right ear for 2 seconds (bottom)
4. Play/pause, answer/hang up: tap the left/right ear once
5. Voice assistant (not during music playback): tap the left/right ear twice
6. Reject the call: Long press the left/right ear for 2 seconds to reject the call

 

Monster Clarity 102200 Airlinks User Manual – Download [optimized]
Monster Clarity 102200 Airlinks User Manual – Download

Join the Conversation

2 Comments

  1. I accidentally made my monster true clarity 102 airlink into single ear mode.(Means it can only play one earpiece at a time. But when i followed the manual here, which was to reset, i unpaired my earpiece from my phone and now the earpiece does not appear on the bluetooth pairing screen. It also does not appear on my second hand phone. I have tried offing the earpiece, shutting my phone off, but all of it does not work. What do i do?

  2. my leftearbuds bass is out ive cleaned them restarted them nothing seems to be working i loved these earbuds i just wanna get them back to normal again what do i do to fix them?or do i have to buy a new pair?

Leave a comment

Your email address will not be published.